ASME A17 6-2010 Standard for Elevator Suspension Compensation and Governor Systems《电梯悬架 校正和调速器系统标准》.pdf

上传人:testyield361 文档编号:456143 上传时间:2018-11-24 格式:PDF 页数:52 大小:915.90KB
下载 相关 举报
ASME A17 6-2010 Standard for Elevator Suspension Compensation and Governor Systems《电梯悬架 校正和调速器系统标准》.pdf_第1页
第1页 / 共52页
ASME A17 6-2010 Standard for Elevator Suspension Compensation and Governor Systems《电梯悬架 校正和调速器系统标准》.pdf_第2页
第2页 / 共52页
ASME A17 6-2010 Standard for Elevator Suspension Compensation and Governor Systems《电梯悬架 校正和调速器系统标准》.pdf_第3页
第3页 / 共52页
ASME A17 6-2010 Standard for Elevator Suspension Compensation and Governor Systems《电梯悬架 校正和调速器系统标准》.pdf_第4页
第4页 / 共52页
ASME A17 6-2010 Standard for Elevator Suspension Compensation and Governor Systems《电梯悬架 校正和调速器系统标准》.pdf_第5页
第5页 / 共52页
亲,该文档总共52页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、Standard for Elevator Suspension, Compensation, and Governor SystemsAN AMERICAN NATIONAL STANDARDASME A17.6-2010INTENTIONALLY LEFT BLANKASME A17.6-2010Standard for ElevatorSuspension,Compensation, andGovernor SystemsAN AMERICAN NATIONAL STANDARDThree Park Avenue New York, NY 10016 USADate of Issuanc

2、e: July 30, 2010The next edition of this Standard is scheduled for publication in 2013. There will be no addendaissued to this edition.ASME issues written replies to inquiries concerning interpretations of technical aspects of thisStandard. The interpretations will be included with each edition. Int

3、erpretations are published onthe ASME Web site under the Committee Pages at http:/cstools.asme.org as they are issued.ASME is the registered trademark of The American Society of Mechanical Engineers.This code or standard was developed under procedures accredited as meeting the criteria for American

4、NationalStandards. The Standards Committee that approved the code or standard was balanced to assure that individuals fromcompetent and concerned interests have had an opportunity to participate. The proposed code or standard was madeavailable for public review and comment that provides an opportuni

5、ty for additional public input from industry, academia,regulatory agencies, and the public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in conn

6、ection with anyitems mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability forinfringement of any applicable letters patent, nor assumes any such liability. Users of a code or standard are expresslyadvised that determination of the validity of any

7、 such patent rights, and the risk of infringement of such rights, isentirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibi

8、lity for only those interpretations of this document issued in accordance with the establishedASME procedures and policies, which precludes the issuance of interpretations by individuals.No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the

9、 prior written permission of the publisher.The American Society of Mechanical EngineersThree Park Avenue, New York, NY 10016-5990Copyright 2010 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedPrinted in U.S.A.CONTENTSForeword vCommittee Roster . viCorrespondence With ASME A17 Commit

10、tee . xiPreface xiiPart 1 Stranded Carbon Steel Wire Ropes for Elevators 1Section 1.1 Scope . 1Section 1.2 References . 1Section 1.3 Terminology . 2Section 1.4 Material . 7Section 1.5 Rope Workmanship and Finish 8Section 1.6 Properties and Tolerances of Newly Constructed Rope 9Section 1.7 Testing An

11、d Compliance for Newly Constructed Rope 11Section 1.8 Ordering Information 12Section 1.9 Packaging and Identification . 13Section 1.10 Replacement Criteria 13Mandatory AppendixI Tables . 17Part 2 Aramid Fiber Ropes for Elevators. 25Section 2.1 Scope . 25Section 2.2 References . 25Section 2.3 Termino

12、logy . 25Section 2.4 Material . 27Section 2.5 Properties and Tolerances of Newly Constructed Rope 27Section 2.6 Newly Constructed Rope Dimensions for Circular Cross-SectionDesigns (Type I) . 28Section 2.7 Newly Constructed Rope Dimensions for Noncircular Cross-Section Designs (Type II) 28Section 2.8

13、 Testing and Compliance . 28Section 2.9 Replacement Criteria 29Part 3 Noncircular Elastomeric Coated Steel Suspension Members forElevators. 30Section 3.1 Scope . 30Section 3.2 References . 30Section 3.3 Terminology . 30Section 3.4 Material . 31Section 3.5 Properties and Tolerances 31Section 3.6 Test

14、ing and Compliance . 32Section 3.7 Replacement Criteria 32Figures1.3.1.1-1 Elements of Stranded Steel Wire Rope 21.3.1.3.2-1 Round Strand . 31.3.1.3.2-2 Compacted Round Strand: Before and After Compacting . 31.3.1.3.3-1 Lay Direction of Strands for Stranded Ropes . 31.3.1.3.4-1 Seale Construction (e

15、.g., 19S, 9-9-1) . 31.3.1.3.4-2 Warrington Construction e.g., 19W, (6+6)-6-1 31.3.1.3.4-3 Filler Construction (e.g., 25F, 12-6F-6-1) . 31.3.1.4-1 Examples of Cores . 4iii1.3.2.4.2-1 Regular (Ordinary) Lay and Lang Lay 51.3.3.1.1-1 Diameter of Round Rope 51.3.3.2.1-1 Strand Lay Length . 51.3.3.2.2-1

16、Rope Lay Length 6Tables1.4.1-1 Wire Level or Tensile Strength Grades for Given Rope Grades 71.4.1.1-1 Wire Level or Tensile Strength Grade Requirements . 81.4.1.1-2 Wire Torsion Requirements 81.6.4.1-1 Weight of Coating for Final-Galvanized or Final-CoatedZn-5Al-MM Rope Wire for Newly Constructed Ro

17、pe . 101.6.4.1-2 Weight of Coating for Drawn-Galvanized or Drawn-CoatedZn-5Al-MM Rope Wire for Newly Constructed Rope . 101.6.6.1.1-1 Tolerances on Rope Diameter (Stranded Rope) for NewlyConstructed Rope With Cores of Fiber or Other NonmetallicMaterials 101.6.6.1.1-2 Tolerances on Rope Diameter (Str

18、anded Rope) for NewlyConstructed Rope With Steel or Steel-Based Composite Cores 111.6.6.1.2-1 Permissible Differences in Rope Diameter for Newly ConstructedRope 111.8.1-1 Ordering Information 131.10.1.2-1 Wire Breaks: Crown Wire Breaks Per Lay Length . 141.10.3-1 Minimum Diameter . 152.4.1.1-1 Nomin

19、al Aramid Yarn Property Values . 272.4.1.1-2 Aramid Resin Impregnated Strand Property Values . 272.6.2-1 Tolerances on Diameter 282.7.2-1 Tolerances on Dimensions . 293.5.7-1 Tolerances on Nominal Noncircular Elastomeric Coated SteelSuspension Member Sizes . 32Nonmandatory AppendixA Inspection and R

20、eplacement of Steel Wire Ropes . 35ivFOREWORDThis is the first edition of a Standard for elevatorsuspension and compensation systems as well as ropesfor governor applications. This Standard has been devel-oped by the American Society of Mechanical Engineers(ASME) to provide guidance to the elevator

21、industry forthe appropriate use of means for suspension, compensa-tion, and governors. The first edition includes standardsfor three technologies for elevators, namely: steel wireropes, aramid fiber ropes, and noncircular elastomericcoated steel suspension members. Uniform standardsfor these importa

22、nt items are necessary to ensure consist-ent levels of safety and to provide guidance for themanufacturers of these items as well as the designers,manufacturers, installers, maintainers, and inspectors ofelevator equipment.As other technologies emerge and are deemed to besuitable for similar applica

23、tions, this Standard will beexpanded to include criteria for their usage.In developing this Standard, experts were assembledfrom the steel wire rope, aramid fiber rope, and noncir-cular elastomeric coated steel suspension members engi-neering and manufacturing fields. Relevant existingstandards were

24、 studied during the development of thisStandard and are referenced where appropriate. Thescope of this Standard covers North American and inter-national requirements in a comprehensive manner anddoes not conflict with existing American or internationalstandards. This Standard is intended to be used

25、in con-junction with the ASME A17.1/CSA B44, Safety Codefor Elevators and Escalators, and related Codes andstandards.Steel Wire Rope for ElevatorsSteel wire rope has been used for many years in theelevator industry, for suspension, compensation, andgovernor applications.Due to the large range of app

26、lications in this diversemarket, many variations of steel wire ropes are in currentuse. Examples include rope of regular and lang lay, leftand right lay, preformed and nonpreformed. Such ropesmay be of a variety of wire materials, from iron to hightensile steel and may be of corrosion resistant cons

27、truc-tion. Various core materials including natural and syn-thetic fiber and steel may also be used. Nominal imperialdimensions as well as SI dimensional ropes are used.vIn recognition of the importance of this vital elevatorcomponent and the unique practices of the NorthAmerican industry, this Stan

28、dard was developed. ThisStandard covers the current applications and providesstrength and material criteria as well as testing, compli-ance, inspection, replacement, and ordering informa-tion. Imperial and SI dimensions are addressed in theStandard. The purpose of this Standard is to enhancepublic s

29、afety and to provide guidance to manufacturersand users of steel wire rope.Aramid Fiber Ropes and Elastomeric Coated SteelBeltsWith the appearance in the market place of new sus-pension and compensation means technologies, such asaramid fiber ropes and noncircular elastomeric coatedsteel suspension

30、members for elevators, the need forstandards that will ensure the safe application of theseitems became evident. This Standard addresses theseimportant technologies.In developing the standards, extensive test resultswere studied and the properties and durability of thenew suspension and compensation

31、 means were exam-ined. The work included visits to major laboratories atwhich all aspects of the noncircular elastomeric coatedsteel suspension members were tested.The work included a visit to the factory of a majormanufacturer of aramid fiber and technical presenta-tions by experts in this technolo

32、gy. The test work of amajor laboratory and field results from the applicationof aramid fiber rope on elevators were also studied.Test facilities where the noncircular elastomeric coatedsteel suspension members were extensively tested onelevators were also visited. In addition, technical presen-tatio

33、ns on the noncircular elastomeric coated steel sus-pension members regarding their construction andtesting took place.Tests on both ramid fiber ropes and noncircular elasto-meric coated steel suspension members included life,durability, resistance to damage, traction, replacementcriteria, effects of

34、 the environment, and many other crite-ria. This work was extremely helpful in developing thestandards and building confidence in the validity of therequirements.ASME A17.6-2010 was approved by the AmericanNational Standards Institute on March 17, 2010.ASME A17 ELEVATORAND ESCALATOR COMMITTEE(Januar

35、y 2010)STANDARDS COMMITTEEJ. W. Coaker, ChairN. B. Martin, Vice ChairH. E. Peelle III, Vice ChairG. A. Burdeshaw, Staff SecretaryE. V. Baker, IUECT. D. Barkand, U.S. Department of LaborR. E. Baxter, Baxter Residential ElevatorsK. S. Lloyd, Jr., Alternate, Abell Elevator InternationalL. Bialy, Otis E

36、levator Co.N. E. Marchitto, Alternate, Otis Elevator Co.B. D. Black, BDBlack Codes, Inc.J. R. Brooks, North Carolina Department of LaborJ. W. Adams, Alternate, Kone, Inc.J. W. Coaker, Coaker however, they should not contain proprietary names or information.Requests that are not in this format will b

37、e rewritten in this format by the Committee priorto being answered, which may inadvertently change the intent of the original request.ASME procedures provide for reconsideration of any interpretation when or if additionalinformation that might affect an interpretation is available. Further, persons

38、aggrieved by aninterpretation may appeal to the cognizant ASME committee or subcommittee. ASME does not“approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity.Attending Committee Meetings. The A17 Standards Committee and the various WorkingCommittees regula

39、rly hold meetings all of which are open to the public. Persons wishing toattend any meeting should contact the Secretary of the Standards Committee.xiPREFACEGENERALThis is one of many standards developed by theAmerican Society of Mechanical Engineers (ASME)under the general auspices of the American

40、NationalStandards Institute (ANSI). Safety codes and standardsare intended to enhance public health and safety. Revi-sions result from committee consideration of factorssuch as technological advances, new data, and changingenvironmental and industry needs. Revisions do notimply that previous edition

41、s were inadequate.This Standard is referenced by and intended to beused in conjunction with ASME A17.1/CSA B44, SafetyCode for Elevators and Escalators, and related Codesand standards. Written inquiries regarding this Standardshould be addressed to the Secretary of the ASME A17Standards Committee.NO

42、TE: Referenced Codes, Standards, and Test Methods thatappear with no date indicated shall be the edition in effect at thetime of publication of this Standard.FORM AND ARRANGEMENTThis Standard consists of three parts, each covering aspecific technology related to elevator suspension andcompensation m

43、eans and governor ropes. TheForeword, Preface, and Notes that are included in thisdocument, and the Interpretations that are provided asa separate document are not part of this AmericanNational Standard. They are advisory in nature and areintended for clarification only.SCOPEThis Standard covers the

44、 means and members of sus-pension, compensation, and governor systems for eleva-tors within the scope of ASME A17.1/CSA B44.xiiNOTE: It must be determined by the individual workingcommittees as to the level of appropriateness of applying the NewTechnologies in their particular applications.This Stan

45、dard includes the material properties,design, testing, inspection, and replacement criteria forthese means. It includes the requirements for steel wirerope, aramid fiber rope, and noncircular elastomericcoated steel suspension members, and provides direc-tion for future constructions as new technolo

46、gydevelops.INTRODUCTIONThis Standard is intended to be used withASME A17.1/CSA B44, Safety Code for Elevators andEscalators, A17.2, Guide for the Inspection of Elevators,Escalators, and Moving Walks, and A17.3, Safety Codefor Existing Elevators and Escalators, and other Codesand Standards referenced

47、 by these Standards as well asother related Standards.The ASME A17.1/CSA B44 Code specifically refer-ences the suspension and compensation means and gov-ernor systems covered by this Standard. This Standardwas developed to provide safe, consistent criteria forsteel wire rope, aramid fiber rope, nonc

48、ircular elasto-meric coated steel suspension members and other meansof suspension and compensation used in the ElevatorIndustry.Part 1 covers steel wire rope.Part 2 covers aramid fiber rope.Part 3 covers noncircular elastomeric coated steel sus-pension members.The Standard is under the auspices of t

49、he ASME A17.1Standards Committee and is subject to the operatingprocedures of this Committee.ASME A17.6-2010STANDARD FOR ELEVATOR SUSPENSION, COMPENSATION,AND GOVERNOR SYSTEMSPart 1Stranded Carbon Steel Wire Ropes for ElevatorsSECTION 1.1SCOPEPart 1 covers the general requirements for the morecommon types of stranded steel wire ropes for hoisting,compensation, and governor applications on passengeror freight elevators. Included in the scope of this Partare steel wire ropes in various grades and constructionsfrom4mmto38mm(532in. to 112in.) manufacturedfrom uncoated wire or metallic c

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1