1、Designation: C 1188 04Standard Guide forEstablishing a Quality Assurance Program for UraniumConversion Facilities1This standard is issued under the fixed designation C 1188; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year
2、of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 This guide provides guidance and recommended prac-tices for establishing a comprehensive quality assurance pro-gra
3、m for uranium conversion facilities.1.2 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate health and safety practices and determine the applica-bility of regulatory limi
4、tations prior to use.1.3 The basic elements of a quality assurance programappear in the following order:FUNCTION SECTIONOrganization 5Quality Assurance Program 6Design Control 7Instructions, Procedures quality assurance; uraniumASTM International takes no position respecting the validity of any pate
5、nt rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision
6、at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comme
7、nts will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted
8、 by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).C1188048
