1、微软认证 70-210模拟试卷 2及答案与解析 1 You are the desktop administrator for Essalesdepartment. Es network contains a RIS server. You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the ins
2、tallation. However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional. You start the computer by using a RIS bootable floppy disk, and you receive the same result. What should you do? （ A） Add an answer file to the root directory of the RIS bootable floppy disk
3、. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. （ B） Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS. （ C） Start the computer by using th
4、e Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk. （ D） Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk. （ E） Start the computer by usin
5、g the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk. 2 You are the administrator of your companys network. The network is configured as shown in the exhibit. You want to install Windows 2000 Professional on 10 non-PXE-compliant comp
6、uters that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router do
7、es not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do? （ A） Add a computer running DHCP Relay Agent to the marketing segment. （ B） Add a computer running the network monitor driver
8、 to the marketing segment. （ C） Move the Windows 2000 Server computer running WINS to the marketing segment. （ D） Move the Windows 2000 Server computer running Active Directory to the marketing segment. 3 You are the administrator of Ezonexams network. An employee named Mark has a local user account
9、 on a Windows 2000 Professional computer. Mark has rights and permissions to multiple files and folders on the computer. All of Marks permissions are being granted through group membership. Mark recently hired a new employee named Eric as his assistant. You want Eric to have the same rights and perm
10、issions that Mark has on the Windows 2000 Professional computer. You want to accomplish this with the least amount of administrative effort. What should you do? （ A） Create a new local group. Create Erics user account. Add Marks user account and Erics user account to the new group. （ B） Create Erics
11、 user account. Copy Marks profile to Erics user account. （ C） Create Erics user account. Make Erics user account a member of all the same groups as Marks user account. （ D） Create Erics user account. Copy the registry entries in the subkey that correspond to Mark under HKEY_USERS to the subkey that
12、corresponds to Eric. 4 Your Windows 2000 Professional computer has 10 shared folders that are available to other network users. A user reports that he cannot access a shared folder named ShareA. You want to respond to the users problem as quickly as possible by using an administrative tool. However,
13、 you cannot remember the server location of ShareA. What should you do? （ A） Use Windows Explorer to display the file paths of your shared folders. （ B） Use Storage in Computer Management to view logical drive properties. （ C） Use Event Viewer in Computer Management to search for shared folder error
14、 messages. （ D） Use System Tools in Computer Management to display the file paths of your shared folders. 5 You have 17GB of private files on drive D on your Windows 2000 Professional computer. You have shared the files as private_files. You do not want other users to see this share name in the brow
15、se list. You want all other share names to continue to appear in the browser list.What should you do? （ A） Stop the computer browser service, and disable the startup state. （ B） Change the comment for the share to hidden:Yes （ C） Change the share name to private_files$. （ D） Add a hidden entry to th
16、e HKLMSystemcurrentcontrolsetserviceslarmanserversharesprivate_files registry value entry. 6 You are the desktop administrator of your Windows 2000 Professional computer. On your computer you have a printer named LaserJet that is attached to your local LPT1 port. You have shared LaserJet and given P
17、rint permission to the Sales group. You are a member of the Sales group. On many occasions you find that you have to wait a long time for your print jobs because there are several jobs ahead of yours. You create a second printer named LaserJet2 using LPT1 port and the default settings. You want to e
18、nsure that you do not have to wait for other print jobs before your print jobs can complete. What should you do? (Each correct answer presents part of the solution. Choose two) A.Grant only your account Print permission to LaserJet2. B.Deny Print permission to the Sales group on LaserJet2. C.Configu
19、re LaserJet to Start printing after last page is spooled. D.Configure LaserJet to Print directly to the printer. E.Set the priority of LaserJet to 10. F.Set the priority of LaserJet2 to 99. 一、填空题 7 You want to upgrade 100 computers from Windows 98 to Windows 2000 Professional. You use setup manager
20、to create the unattended.txt file. The hardware on each computer is configured identically. You upgrade 10 of the computers. You notice that the monitors on the 10 computers go blank after Windows 2000 Professional loads. You restart one of the computers in Safe Mode, and find that the monitor appea
21、rs to be working. Which change should you make to unattend.txt to configure your video settings correctly?Click the appropriate line on the Unattend.txt Notepad screen. 微软认证 70-210模拟试卷 2答案与解析 1 【正确答案】 D 【试题解析】 Explanation: The problem here is that Windows 2000 doesnt have a driver for the SCSI-contr
22、oller and so cant find a hard disk to install onto. We can solve this problem by providing a driver during the installation. During the text mode part of the installation, you will see the option to “Press F6 to install a third party SCSI driver“. When you press F6, you will be prompted to insert a
23、floppy disk with the SCSI-controller driver on it. Windows 2000 will then be able to see the SCSI hard disks and install successfully. Incorrect Answers: A: An answer file provides answers to the questions you get asked during the graphical part of the setup routine. The setup program wont run becau
24、se Windows 2000 doesnt have a driver for the SCSI-controller and so cant find a hard disk to install onto. Therefore, an answer file wont help. B: We need to install a SCSI controller driver. However, this is not the correct way to do this. C: An answer file provides answers to the questions you get
25、 asked during the graphical part of the setup routine. The setup program wont run because Windows 2000 doesnt have a driver for the SCSI-controller and so cant find a hard disk to install onto. Therefore, an answer file wont help. E: We dont need to install a new HAL. You would install a new HAL on
26、a high end server with multiple processors. 2 【正确答案】 A 【试题解析】 Explanation: RIS requires DNS, DHCP, and Active Directory. These services are all present according to the exhibit. The problem is the router which isnt RFC-1542 compliant, i.e. it is not BOOTP compliant, and therefore the DHCP Server wil
27、l not be reached from the marketing segment. Thus the computers will not be able to contact the RIS server since RIS clients require DHCP to acquire TCP/IP configuration. By adding a DHCP Relay Agent to the marketing segment the computers will be able to connect to the DHCP server, get their TCP/IP
28、configuration, and connect to the RIS server. Incorrect answers: B: Network monitor driver is used to monitor network traffic. It cannot solve the problem in this scenario and is thus inappropriate. C: In addition to a DHCP server, the RIS server requires the presence of a DNS server running Active
29、Directory. As DNS and Active Directory are present in the exhibit, there is no need for the WINS server. Both WINS and DNS with Active Directory are responsible for name resolution. A WINS server is required for compatibility with older versions of Windows and with non-Windows computers. D: A DHCP s
30、erver, a DNS server and Active Directory is available on this network. These servers and services are required for RIS. However the RIS server cannot access the DHCP server as the router is not RFC-1542 compliant. 3 【正确答案】 C 【试题解析】 Explanation: Since all Marks permissions are being granted through g
31、roup membership, it would be the application of the minimum amount of administrative effort if you are to make Erics user accounts a member of the same groups as Marks user account. Incorrect answers: A: There is no need to create a new local group and making only Eric and Marks user accounts member
32、s of this group. This will also work, but it involves unnecessary administrative effort since there are already groups that contain the permissions as needed. B: When copying, you might loose permissions. D: This option is not the solution since it suggests too much administrative effort. 4 【正确答案】 D
33、 【试题解析】 Explanation: The System Tools component of the Computer Management console can be used to locate shared folders. The Computer Management console can be accessed through the Administrative Tools applet in the Control Panel. In the Computer Management console, expand System Tools, expand Share
34、d Folders and then open Shares to display all shared folders. Incorrect Answers: A: Windows Explorer does not show the location of shared folders in one place. To locate shared folders through Windows Explorer, you would need to check each directory and subdirectory for a shared folder icon. B: Logi
35、cal drives properties are used to display the capacity of the local logical drives on the local computer and the security permissions that have been granted on the logical drive. Storage does not display the shared folders. C: The Event viewer is used to view logs and error messages generated by Win
36、dows 2000. It cannot be used to show information on shares as it does not log any information concerning shared folders. 5 【正确答案】 C 【试题解析】 Explanation: By appending a dollar sign to the end of the share name, the share is hidden and the folder will not be shown in any browse list. Only users who kno
37、w the folder name can gain access to it if they also possess the proper permissions to it. Incorrect answers: A: If the computer browser service is stopped, users on the computer will not be able to browse the network. The share would still be visible though. B: A share will not become hidden by add
38、ing any comments to it. It will only be hidden when the dollar sign is appended to the share name. D: A share cannot be hidden by adding a hidden entry into the registry. It will only be hidden when the dollar sign is appended to the share name. 6 【正确答案】 A,F 【试题解析】 Explanation: The default priority
39、for a print job is 1. Priorities are number from 1 to 99 with 1 being the lowest and 99 being the highest. Therefore, to move your print job to the top of the print queue, you can simply raise the priority. Furthermore, since you created a printer, called LaserJet2, attached to your local LPT1 port
40、all you need to do is grant your account Print permission to LaserJet2. Incorrect answers: B: With only your account having the Print permission to LaserJet2, there is no need to Deny Print permission to the Sales group. C&D: There is no need to configure LaserJet to either Start printing after last
41、 page is spooled of to Print directly to the printer, all that is necessary is that you should grant only your account Print permission to LaserJet2 and set the priority on 99. E: The setting of priorities on LaserJet to 10 would be irrelevant since you will be interested in LaserJet2. Furthermore,
42、a priority of 10 would be insufficient when you do not want to wait to have your print jobs completed. 一、填空题 7 【正确答案】 【试题解析】 Explanation: Click on theVrefresh=150 The video adapters refresh rate defines the number of times that the screen must be rewritten per second. The higher the resolution, the
43、larger the number of dots that have to be written within every refresh cycle. Video adapters and monitors have a default refresh rate of 60 Hz. This is the setting guaranteed to work on most modern video adapters and monitors, even with the standard video adapter driver installed. Not all video adapters and monitors support a refresh rate of above 80 Hz. When the refresh rate is not supported, the monitor goes blank or the image becomes distorted.
