1、Designation: D6860/D6860M 09D6860/D6860M 13Standard Tables ofBody Measurements for Boys, Sizes 64H to 2420H Husky1This standard is issued under the fixed designation D6860/D6860M; the number immediately following the designation indicates theyear of original adoption or, in the case of revision, the
2、 year of last revision. A number in parentheses indicates the year of lastreapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval.INTRODUCTIONThese tables were developed from body measurements used currently by apparel manufacturers andretail organiza
3、tions. The measurements were derived originally from the 1970 Voluntary ProductStandard PS 36-70 data published by the U.S. Department of Commerce. These data were based onoriginal research conducted by the U.S. Department of CommerceAgriculture2 National Bureau ofStandards.in the 1930s. This standa
4、rd takes into consideration childrens growth patterns reflected inthe 1980 charts for the National Center for Health Statistics3 and the 1977 Anthropometric Study ofU.S. Infants and Children conducted by the University of Michigan4 and 2000 CDC Growth Chartsfor the United States5 and CDC Advance Dat
5、a No. 361, Dated 7/5/2005. All sudden shifts ofproportion have been eliminated so as to reflect the gradual growth and development of the child. Toverify the proposed body measurements, a three-dimensional Avatar was created in the size range byAlvanon Inc.6 for a visual reference and also attached
6、in the documentation.1. Scope1.1 These tables list body measurements of boys, sizes 6 to 24 Husky. for boys husky sizes. Although these are bodymeasurements, they can be used as a baseline in designing apparel for husky boys and students in this size range when consideringsuch factors as fabric type
7、 ease for body movement, styling, and fit.1.2 The maximum age for Boys Husky chart is 15 years old to size 20H.1.3 The size table includes range of little boy sizes; these values are for husky boys and will be included in boys regular andslim as well.1.4 The husky body has a heavier build These tab
8、les include body measurements for the complete range of Boys Husky sizing.Husky subjects are the same stature (height), with fuller body, and higher body weight than other boys size ranges.regular subjectsas illustrated by measurement charts in Tables D6458-12.1.5 The values stated in either SI unit
9、s or inch-pound units are to be regarded separately as standard. The values stated in eachsystem may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from thetwo systems may result in non-conformance with the standard.1.6 This standard does
10、not purport to address all of the safety concerns, if any, associated with its use. It is the responsibilityof the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatorylimitations prior to use.1 This test method is under the jurisdic
11、tion of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.55 on Body Measurement forApparel Sizing.Current edition approved Sept. 1, 2009July 1, 2013. Published December 2009September 2013. Originally approved in 2003. Last previous edition approved in 20032009as D6
12、86003.09. DOI: 10.1520/D6860_D6860M-09.10.1520/D6860_D6860M-13.2 U.S. Department of Commerce, Voluntary Product Standard: Body Measurements for the Sizing of BoysChildrens Apparel, NIST Publication No. PS 36-70,54-172,Washington, DC.3 Available from the National Center for Health Statistics (NCHS),
13、a division of Centers for Disease Control body measurements; boys; garment sizes; husky;husky boys; tablesASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised tha
14、t determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reappro
15、ved or withdrawn.Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you fee
16、l that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual repr
17、ints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).D6860/D6860M 139
