ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf

上传人:赵齐羽 文档编号:524124 上传时间:2018-12-04 格式:PDF 页数:5 大小:99.25KB
下载 相关 举报
ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf_第1页
第1页 / 共5页
ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf_第2页
第2页 / 共5页
ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf_第3页
第3页 / 共5页
ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf_第4页
第4页 / 共5页
ASTM D6974-2009 431 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels&8212 Filtration and Culture Procedures《液体燃料中能活细菌和真菌计数的实施规程 过滤和培养程序》.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Designation: D 6974 09An American National StandardStandard Practice forEnumeration of Viable Bacteria and Fungi in Liquid FuelsFiltration and Culture Procedures1This standard is issued under the fixed designation D 6974; the number immediately following the designation indicates the year oforiginal

2、 adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice covers a membrane filter (MF) procedurefor the detect

3、ion and enumeration of Heterotrophic bacteria(HPC) and fungi in liquid fuels with kinematic viscosities#24mm2s-1at ambient temperature.1.2 This quantitative practice is drawn largely from IPMethod 385 and Test Method D 5259.1.3 This test may be performed either in the field or in thelaboratory.1.4 T

4、he ability of individual microbes to form colonies onspecific growth media depends on the taxonomy and physi-ological state of the microbes to be enumerated, the chemistryof the growth medium, and incubation conditions. Conse-quently, test results should not be interpreted as absolutevalues. Rather

5、they should be used as part of a diagnostic orcondition monitoring effort that includes other test parameters,in accordance with Guide D 6469.1.5 This practice offers alternative options for deliveringfuel sample microbes to the filter membrane, volumes ordilutions filtered, growth media used to cul

6、tivate fuel-bornemicrobes, and incubation temperatures. This flexibility isoffered to facilitate diagnostic efforts. When this practice isused as part of a condition monitoring program, a singleprocedure should be used consistently.1.6 The values stated in SI units are to be regarded asstandard. No

7、other units of measurement are included in thisstandard.1.7 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bilit

8、y of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards:2D 1129 Terminology Relating to WaterD 1193 Specification for Reagent WaterD 4175 Terminology Relating to Petroleum, PetroleumProducts, and LubricantsD 5259 Test Method for Isolation and Enumeration ofEnterococci from

9、 Water by the Membrane Filter ProcedureD 6426 Test Method for Determining Filterability ofMiddle Distillate Fuel OilsD 6469 Guide for Microbial Contamination in Fuels andFuel SystemsD 7463 Test Method for Adenosine Triphosphate (ATP)Content of Microorganisms in Fuel, Fuel/Water Mixturesand Fuel Asso

10、ciated WaterD 7464 Practice for Manual Sampling of Liquid Fuels,Associated Materials and Fuel System Components forMicrobiological TestingE 1326 Guide for Evaluating Nonconventional Microbio-logical Tests Used for Enumerating BacteriaF 1094 Test Methods for Microbiological Monitoring ofWater Used fo

11、r Processing Electron and MicroelectronicDevices by Direct Pressure Tap Sampling Valve and by thePresterilized Plastic Bag Method2.2 Energy Institute Standards:3IP 385 Viable aerobic microbial content of fuels and fuelcomponents boiling below 90CFiltration and culturemethod3. Terminology3.1 Definiti

12、ons:3.1.1 For definition of terms used in this method refer toTerminologies D 1129 and D 4175, and Guide D 6469.3.1.2 aseptic, adjsterile, free from viable microbiologicalcontamination.1This practice is under the jurisdiction of ASTM Committee D02 on PetroleumProducts and Lubricants and is the direc

13、t responsibility of Subcommittee D02.14 onStability and Cleanliness of Liquid Fuels.Current edition approved June 1, 2009. Published July 2009. Originally approvedin 2003. Last previous edition approved in 2004 as D 697404.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orconta

14、ct ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from Energy Institute, 61 New Cavendish St., London, WIG 7AR,U.K., http:/www.energyinst.org.uk.1Copyright ASTM International, 1

15、00 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.3.2 Acronyms:3.2.1 CFUcolony forming unit3.2.2 HPCheterotrophic plate count3.2.3 MFmembrane filter3.2.4 MEAmalt extract agar3.2.5 TNTCtoo numerous to count3.2.6 TSAtryptone soy agar3.3 Symbols:3.3.1 Nnumber of CFU L-1

16、3.3.2 CCnumber of colonies on membrane filter3.3.3 Vsample volume filtered, mL4. Summary of Practice4.1 Any free water present in a fuel sample is removed bysettling in a separatory funnel. After the water has beenremoved, a known volume of the remaining fuel is filteredthrough a membrane filter ase

17、ptically by one of three methods.4.2 The filter membrane retains microbes present in the fuel.Filter replicate fuel samples through fresh membranes topermit replicate testing, growth on alternative nutrient media,or both.4.3 After filtration, place each membrane on one of twotypes of agar growth med

18、ia, incubate at a designated tempera-ture for three days, and examine for the presence of CFU.4.4 Incubate the filter media on agar for two more days, thenreexamine.4.5 Count the colonies manually or by electronic counter.4.5.1 If practical, identify colonies on each agar medium,based on colony colo

19、r, morphology, and microscopic exami-nation.4.5.2 Convert bacterial and fungal colony counts to CFUper litre of fuel.5. Significance and Use5.1 Biodeteriogenic microbes infecting fuel systems typi-cally are most abundant within slime accumulations on systemsurfaces or at the fuel-water interface (Gu

20、ide D 6469). How-ever, it is often impractical to obtain samples from theselocations within fuel systems. Although the numbers of viablebacteria and fungi recovered from fuel-phase samples arelikely to be several orders of magnitude smaller than thosefound in water-phase samples, fuel-phase organism

21、s are oftenthe most readily available indicators of fuel and fuel systemmicrobial contamination.5.2 Growth Medium SelectivityGuide E 1326 discussesthe limitations of growth medium selection. Any mediumselected will favor colony formation by some species andsuppress colony formation by others. As not

22、ed in 6.3, physical,chemical and physiological variables can affect viable cellenumeration test results. Test Method D 7463 provides anon-culture means of quantifying microbial biomass in fuelsand fuel associated water.5.3 Since a wide range of sample sizes, or dilutions thereof,can be analyzed by t

23、he membrane filter technique (TestMethods D 5259 and F 1094), the test sensitivity can beadjusted for the population density expected in the sample.5.4 Enumeration data should be used as part of diagnosticefforts or routine condition monitoring programs. Enumerationdata should not be used as fuel qu

24、ality criteria.6. Interferences6.1 High non-biological particulate loads (sediment) canclog the membrane and prevent filtration.6.2 Each CFU is assumed to originate from a single micro-bial cell. In reality, microbes often form aggregates whichappear as a single colony. Consequently, viable count da

25、ta arelikely to underestimate the total number of viable organisms inthe original sample.6.3 The metabolic state of individual microbes may beaffected by numerous physical-chemical variables in the fuel.Injured cells or cells that have relatively long generation timesmay not form colonies within the

26、 time allotted for testobservations. This results in an underestimation of the numbersof viable microbes in the original fuel sample.7. Apparatus7.1 Separatory Funnels, glass, nominal capacity 500 mL.7.2 Measuring Cylinders, glass, nominal capacity 100 mLand1L.7.3 Pipettes, glass or sterile disposab

27、le plastic, nominalcapacity 10 mL, or adjustable volume pipette and steriledisposable plastic tips.7.4 Membrane Filter, mixed esters of cellulose, presteril-ized, preferably gridded, 47 mm diameter, nominal pore size0.45 m.NOTE 1While the recommended filter material is mixed esters ofcellulose, the

28、selection of membrane material will depend on individualpreference and fuel type.7.5 Filtration Unit, one of:7.5.1 Unit, as described in Test Method D 6426, withpre-sterilized in-line filter housing, or7.5.2 Hypodermic Syringe, sterile, 100 mL, with pre-sterilized in-line filter housing, or7.5.3 Fil

29、ter Holder Assembly, single or manifold, glass,stainless steel, or polypropylene, pre-sterilized.NOTE 2If the vacuum filtration option (7.5.3) is chosen, a vacuumsource, not more than -66 kPa will also be needed.7.6 Forceps, blunt tipped.7.7 Filter Flask, of sufficient capacity to receive the entire

30、sample being filtered plus washings.7.8 Petri Dishes, disposable plastic or glass, nominal diam-eter $50 mm.NOTE 3Pre-poured Petri dishes, containing the growth media de-scribed below are available commercially and may be substituted for thedishes listed here.7.9 Incubator, capable of maintaining a

31、temperature of 25 62C or any other temperature (within the rangeambient to60C), as appropriate.7.10 Water Bath, capable of maintaining a temperature of 476 2C and receiving 500 mL bottles. Water bath capacityshould be sufficient to accommodate at least one bottle of eachtype of agar growth medium us

32、ed.7.11 Glass Bottles, screw cap with gas-tight closures, 500mL nominal capacity.7.12 Culture Tubes, glass, 16 by 125 mm, screw cap.7.13 Autoclave, with capacity to hold 500 mL glass bottlesupright.D6974092NOTE 4Items 7.10-7.13 are not needed if using commercially pre-pared Petri dishes, as indicate

33、d in Note 3.8. Reagents and Materials8.1 Purity of ReagentsReagent grade chemicals shall beused in all tests. Unless otherwise indicated, it is intended thatall reagents conform to the specifications of the Committee onAnalytical Reagents of the American Chemical Society wheresuch specifications are

34、 available.48.2 The agar used in preparation of culture media shall be ofmicrobiological grade. Whenever possible, use commercialculture media.8.3 Water PurityUnless otherwise indicated, references towater shall be understood to mean reagent water as defined byType III of Specification D 1193.8.4 Ch

35、lortetracycline, 0.1 % (w/v) aqueous. Dissolve 0.1 gchlortetracycline in water and dilute to 100 mL. Sterilize bypassing through a 0.2 m filter.8.5 Detergent Solution 0.1 % (v/v)Dissolve 10 mL ofpolyoxyethylene (20) sorbitan monooleate5in 990 mL water.Sterilize, either by passing through a 0.2 m mem

36、brane filterinto a sterile vessel, or autoclaving at 121C for 15 min.8.6 Hydrochloric Acid, 1 mol HCl L-1.8.7 Lactic Acid, 10 % (w/v) aqueous. Dissolve 10 g of lacticacid in water and dilute to 100 mL. Sterilize by passing througha 0.2 m filter.8.8 Malt Extract Agar (MEA):8.8.1 Composition/Litre:Mal

37、t Extract 30 gMycological Peptone 5 gAgar 15 gWater 1 L8.8.2 PreparationSuspend the malt extract, mycologicalpeptone and agar in 1 L of water and boil to dissolve. Adjustthe pH to 5.4 6 0.2 using either 1 mL L-1hydrochloric acid(8.6) or sodium hydroxide 10 % w/v (8.10). Dispense 250 mLportions into

38、500 mL glass screw-cap bottles (7.11). Sterilizeby autoclaving at 121 6 2C for 10 min. Cool and maintain thesterilized agar in a water bath (7.10) at 47 6 2C. Optionally,after the agar has cooled to 47 6 2C, add 1 mL of a 1.0 %aqueous solution of chlorotetracycline (filter sterilized bypassing throu

39、gh a 0.2 m filter, see 8.4) per 100 mL MEA andmix by shaking. If the medium is required at pH 3.5, add 10 %lactic acid (filter sterilized by passing through a 0.2 m filter,see 8.7) to adjust pH. Once acidified, the MEA shall not bereheated. Make agar plates of the medium by pouring sufficientMEA int

40、o sterile petri dishes to give a layer approximately 4mm thick. Allow to cool and set.NOTE 5MEA is available from various manufacturers in dehydratedform and in pre-poured plates with and without added antibiotic, either ofwhich may be used. When sterilizing MEA prepared from commercialdehydrated me

41、dia, follow the manufacturers instructions for sterilization.Avoid overheating.NOTE 6Alternative media to MEA may be used, providing the abilityof any alternative medium to support comparable growth of yeast andmolds that are likely to be encountered in test samples can be demon-strated.NOTE 7Altern

42、ative antibiotics may be used providing their ability toinhibit growth of bacteria but not yeast and molds has been validated.8.9 Ringers Solution, One-Quarter Strength:8.9.1 Composition/Litre:Sodium chloride 2.25 gPotassium chloride 0.105 gCalcium chloride 0.12 gSodium bicarbonate 0.05 gWater 1 L8.

43、9.2 PreparationDissolve salts in 1 L of water anddispense 10 mL portions into screw capped culture tubes(7.12). Sterilize by autoclaving at 121C for 15 min.NOTE 8One-quarter strength Ringers salts are available in tabletform from various manufacturers.8.10 Sodium Hydroxide, 10 % (w/v) aqueous. Disso

44、lve 10 gNaOH in water and dilute to 100 mL.8.11 Tryptone Soy Agar (TSA):8.11.1 Composition/Litre:Tryptone 15 gSoy protein 5 gSodium chloride 5 gAgar 15 gWater 1 L8.11.2 PreparationSuspend the dry ingredients in 1 L ofwater and boil to dissolve. Dispense 250 mL portions into 500mL glass screw-cap bot

45、tles (7.11). Sterilize by autoclaving at121 6 2C for 10 min. Cool and maintain the sterilized agar ina water bath (7.10)at476 2C. Draw a sample and test thepH. If the pH fi 7.3 6 0.3, reject the batch and make a freshmixture. Make agar plates of the medium by pouring sufficientTSA into sterile petri

46、 dishes to give a layer approximately 4mm thick. Allow to cool and set.NOTE 9TSA is available from various manufacturers in dehydratedform and in pre-poured plates.NOTE 10Alternative media to TSAmay be used, providing the abilityof any alternative medium to support comparable growth of bacteria that

47、are likely to be encountered in test samples can be demonstrated.9. Procedure9.1 Sampling:9.1.1 Samples shall be drawn in accordance with PracticeD 7464.9.1.1.1 To reduce the risk of accidental contamination,samples intended for viable microbial enumeration shall not beused for other tests until aft

48、er they are no longer needed forenumeration testing.9.1.1.2 It may not be possible to use aseptic technique underfield conditions. To reduce risk of cross-contaminatingsamples, sampling devices shall be rinsed with 70 % alcohol(ethanol, methanol, or isopropanol) to disinfect sample contactsurfaces b

49、efore samples are drawn. All samples and devices4Reagent Chemicals, American Chemical Society Specifications, AmericanChemical Society, Washington, DC. For Suggestions on the testing of reagents notlisted by the American Chemical Society, see Annual Standards for LaboratoryChemicals, BDH Ltd., Poole, Dorset, U.K., and the United States Pharmacopeiaand National Formulary, U.S. Pharmacopeial Convention, Inc. (USPC), Rockville,MD.5The sole source of supply of Tween 80 known to the committee at this time isSigma Aldrich Co., St. Lo

展开阅读全文
相关资源
猜你喜欢
  • ASTM D3760-2012 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography《用气相色谱法分析异丙苯(枯烯)的标准试验方法》.pdf ASTM D3760-2012 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography《用气相色谱法分析异丙苯(枯烯)的标准试验方法》.pdf
  • ASTM D3760-2013 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography《用气相色谱法分析异丙苯(枯烯)的标准试验方法》.pdf ASTM D3760-2013 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography《用气相色谱法分析异丙苯(枯烯)的标准试验方法》.pdf
  • ASTM D3760-2018 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography《用气相色谱法分析异丙基苯(枯烯)的标准试验方法》.pdf ASTM D3760-2018 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography《用气相色谱法分析异丙基苯(枯烯)的标准试验方法》.pdf
  • ASTM D3761-1996(2002) Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion Ion Selective Electrode Method《用氧弹燃烧 离子选择电极法测定煤中总氟含量的标准试验方法》.pdf ASTM D3761-1996(2002) Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion Ion Selective Electrode Method《用氧弹燃烧 离子选择电极法测定煤中总氟含量的标准试验方法》.pdf
  • ASTM D3761-2010 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion Ion Selective Electrode Method《用氧弹燃烧 离子选择电极法测定煤中总氟含量的标准试验方法》.pdf ASTM D3761-2010 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion Ion Selective Electrode Method《用氧弹燃烧 离子选择电极法测定煤中总氟含量的标准试验方法》.pdf
  • ASTM D3762-2003 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)《用胶粘剂粘结的铝表面耐久性的标准试验方法(楔入试验)》.pdf ASTM D3762-2003 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)《用胶粘剂粘结的铝表面耐久性的标准试验方法(楔入试验)》.pdf
  • ASTM D3762-2003(2010) Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)《用胶粘剂粘结的铝表面耐久性的标准试验方法(楔入试验)》.pdf ASTM D3762-2003(2010) Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)《用胶粘剂粘结的铝表面耐久性的标准试验方法(楔入试验)》.pdf
  • ASTM D3763-2006 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors《用载荷和位移传感器测试塑料的高速穿孔特性的标准试验方法》.pdf ASTM D3763-2006 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors《用载荷和位移传感器测试塑料的高速穿孔特性的标准试验方法》.pdf
  • ASTM D3763-2008 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors.pdf ASTM D3763-2008 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ASTM

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1