1、Designation: E2163 06 (Reapproved 2014)Standard Guide forMinimum Training Requirements for Examiners ConductingPsychophysiological Detection of Deception (PDD) Testingof Sex Offenders in Treatment, Probation or Other SimilarPrograms1This standard is issued under the fixed designation E2163; the numb
2、er immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1
3、.1 This guide establishes the minimum training requiredfor PDD examiners engaged in the psychophysiological detec-tion of deception (PDD) examinations for applications withindividuals in treatment, or probation or parole for sex of-fenses.2. Referenced Documents2.1 ASTM Standards:2E2000 Guide for Mi
4、nimum Basic Education and Training ofIndividuals Involved in the Detection of Deception (PDD)(Withdrawn 2014)3E2062 Guide for PDD Examination Standards of PracticeE2080 Guide for Clinical Psychophysiological Detection ofDeception (PDD) Examinations for Sex Offenders3. Terminology3.1 Definitions:3.1.
5、1 basic PDD trainingthe initial training required toadminister PDD (polygraph) examinations which is set forth inGuide E2000.4. Significance and Use4.1 This guide is intended to ensure that those individualswho are administering PDD examinations of sex offenders areproficient in such testing techniq
6、ues.5. Minimum Requirements for a Qualifying Curriculumfor PDD Testing of Sex Offenders5.1 The required number of minimum hours of advancedspecial training to qualify for sex offender testing is 40 h inaccordance with Guide E2062.5.2 A minimum of 24 h of training must be in the primaryarea of sex of
7、fender PDD testing to include:5.2.1 Techniques of sexual history disclosure testing,5.2.2 Techniques of specific offense issue testing,5.2.3 Techniques of maintenance testing,5.2.4 Techniques of monitoring testing,5.2.5 Instruction in validated PDD testing formats,5.2.6 Pretest interview procedures
8、and formats,5.2.7 Use of PDD examinations as required by Guide E2080in the treatment and supervision process, and5.2.8 Appropriate legal requirements or restrictions.5.3 A minimum of 16 h of specialized training must begiven on topics which directly relate to the treatment andsupervision of the sex
9、offender. The topics shall include, butare not limited to:5.3.1 Behavior and motivation of sex offenders,5.3.2 Trauma factors associated with victims or survivors ofsexual assault,5.3.3 Overview of the assessment and treatment modalitiesfor sex offenders, and5.3.4 Sex offender denial.5.4 Instructors
10、 in course material related to PDD testingmust meet the minimum ASTM standards of a primaryinstructor for a PDD basic course as required by Guide E2000.Additionally, that instructor shall possess professionally recog-nized expertise in sex offender testing.5.4.1 All instructors of sex offender testi
11、ng courses relatingto treatment and supervision shall be qualified by appropriatecredentials and experience in the areas of their instruction.They need not be PDD examiners.1This guide is under the jurisdiction of ASTM Committee E52 on ForensicPsychophysiology and is the direct responsibility of Sub
12、committee E52.04 onExaminer Education and Training.Current edition approved May 1, 2014. Published May 2014. Originallyapproved in 2001. Last previous edition approved in 2006 as E2163 06. DOI:10.1520/E2163-06R14.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Cu
13、stomer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700
14、, West Conshohocken, PA 19428-2959. United States16. Sex Offender Testing Course Admission andCertification Requirements6.1 All PDD examiners attending the polygraph instructionportion of a sex offender testing course of instruction must begraduates of a basic polygraph examiner training coursemeeti
15、ng the minimum requirements set forth in Guide E2000.6.2 Non-PDD examiners who are involved in the clinicaltreatment and supervision of sex offenders may attend the sexoffender testing course but will not be eligible to be certified topractice as PDD examiners, as a result of attending this course.6
16、.3 Evidence of PDD training should be documented by theprovider of the instruction and furnished to the personsreceiving this PPD training by diploma, letter or transcriptsetting forth the following minimum information:6.3.1 Name, address, and location of the training,6.3.2 Name of the instructor or
17、 instructor(s) providing theinstruction along with a resume of the instructor(s),6.3.3 Date(s) of training and name of the person receivingthe training, and6.3.4 Number of hours of training broken down by curricu-lum or subject matter and appropriate course outline(s).7. Keywords7.1 advanced PDD tra
18、ining; continuing education; forensicpsychophysiology; maintenance or monitoring examinations;PDD examinations; polygraph examiner; sexual history disclo-sure examinationsThis standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and
19、if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, w
20、hich you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
21、,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).E2163 06 (2014)2
