1、Designation: E 2462 05Standard Performance Specification forCargo Bed Cover (CBC) HMMWV, Type I1This standard is issued under the fixed designation E 2462; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision.
2、A number in parentheses indicates the year of last reapproval. Asuperscript epsilon (e) indicates an editorial change since the last revision or reapproval.1. Scope1.1 ScopeThis specification covers the performance re-quirements for the Type I Cargo Bed Cover (CBC). The TypeI Cargo Bed Cover is a re
3、movable general purpose rigidenclosure for the cargo bed of the M1037, M1042, M1097, andM1113 High-Mobility Multipurpose Wheeled Vehicle (HM-MWV). The Type I CBC provides environmental protectionand security for mission equipment and items of generaltransport.1.2 The values stated in inch-pound unit
4、s are to be regardedas the standard. The values given in parenthesis are forinformation only.1.3 The following safety hazards caveat pertains only to thetest required portion, Section 4, of this specification. Thisstandard does not purport to address all of the safety concerns,if any, associated wit
5、h its use. It is the responsibility of the userof this standard to establish appropriate safety and healthpractices and determine the applicability of regulatory limita-tions prior to use.2. Referenced Documents2.1 ASTM Standards:2E 1925 Specification for Engineering and Design Criteriafor Rigid Wal
6、l Relocatable Structures2.2 Army Standards:3ARMYTM 9-2320-280-10 HMMWVS Operators ManualARMY TM 10-5411-231-13 cover; HMMWV; shelterASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard
7、 are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif n
8、ot revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which
9、 you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).E2462059
