1、Designation: F1728 96 (Reapproved 2014)Standard Practice forMultiple Persons Cold Water Survival/Rescue Technique:Huddle Position1This standard is issued under the fixed designation F1728; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revi
2、sion, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This practice covers the recommended water rescueprocedure for performing the huddle position.1.2 Th
3、is practice is one in a set of self-rescue techniques forthe water rescuer.1.3 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determin
4、e the applica-bility of regulatory limitations prior to use.2. Terminology2.1 huddle position, na multiple person water rescuetechnique for heat conservation when immersed in cold waterand the majority of the rescuers are wearing personal flotationdevices. This technique conserves heat by using pers
5、onalflotation devices and clothing, group body contact, and bodyposture to limit exposure of the bodys major heat loss areas tothe cold water.2.2 personal flotation device (PFD), na buoyant devicesuitable for use by one person in water emergencies. Thesedevices may be vests, ring buoys, life preserv
6、ers, cushions, andother special purpose buoyant devices.3. Significance and Use3.1 This practice establishes a multiple person cold watersurvival/rescue procedure.3.2 All persons who are identified as water rescuers shallmeet the requirements of this practice.3.3 This practice is intended to assist
7、government agencies,state, local, or regional organizations; fire departments; andrescue teams and others who are responsible for establishing aminimum performance for personnel who respond to wateremergencies.3.4 The majority of the rescuers performing this techniquemust be wearing personal flotati
8、on devices. These devicesshould conform to standards set by the appropriate nationalregulatory authority, that is, the U.S. Coast Guard in the UnitedStates, and be in good and serviceable condition.3.5 A water rescuer sometimes may be immersed in coldwater for prolonged periods of time. They are una
9、ble to get toshore or shore is too far away, rescue is not imminent, no boatis available to get into or on top of, and no flotsam is available.The water rescuer needs to assume a defensive posture toconserve heat and increase survival time.4. Procedure4.1 Upon initial immersion in cold water, the re
10、scuersshould cover the mouth and nose to prevent the aspiration ofwater.4.2 “Huddle” together, side by side, in a circle.4.3 Float in a sitting position with the legs drawn up, kneestogether, and with the ankles crossed.4.4 Place arms against the side of torso, bent at the elbows,joining the rescues
11、 together.4.5 Place small children, injured people, and those withoutflotation in the center of the huddle.4.6 Remain calm and think clearly.4.7 Leave all clothing on.4.8 Wait for rescue.5. Keywords5.1 cold water survival; huddle position; self-rescue tech-nique; water rescue; water rescuers1This pr
12、actice is under the jurisdiction of ASTM Committee F32 on Search andRescue and is the direct responsibility of Subcommittee F32.02 on Management andOperations.Current edition approved March 1, 2014. Published March 2014. Originallyapproved in 1996. Last previous edition approved in 2007 as F1728 96(
13、2007).DOI: 10.1520/F1728-96R14.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States1ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of
14、this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five
15、years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical com
16、mittee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 1
17、9428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).F1728 96 (2014)2
