ASTM F668-2017 Standard Specification for Polyvinyl Chloride (PVC) Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric《聚氯乙烯(PVC) 聚烯烃和其他聚合物涂覆的钢链栅栏织物的标准规格》.pdf

上传人:testyield361 文档编号:537069 上传时间:2018-12-06 格式:PDF 页数:6 大小:111.05KB
下载 相关 举报
ASTM F668-2017 Standard Specification for Polyvinyl Chloride (PVC) Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric《聚氯乙烯(PVC) 聚烯烃和其他聚合物涂覆的钢链栅栏织物的标准规格》.pdf_第1页
第1页 / 共6页
ASTM F668-2017 Standard Specification for Polyvinyl Chloride (PVC) Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric《聚氯乙烯(PVC) 聚烯烃和其他聚合物涂覆的钢链栅栏织物的标准规格》.pdf_第2页
第2页 / 共6页
ASTM F668-2017 Standard Specification for Polyvinyl Chloride (PVC) Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric《聚氯乙烯(PVC) 聚烯烃和其他聚合物涂覆的钢链栅栏织物的标准规格》.pdf_第3页
第3页 / 共6页
ASTM F668-2017 Standard Specification for Polyvinyl Chloride (PVC) Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric《聚氯乙烯(PVC) 聚烯烃和其他聚合物涂覆的钢链栅栏织物的标准规格》.pdf_第4页
第4页 / 共6页
ASTM F668-2017 Standard Specification for Polyvinyl Chloride (PVC) Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric《聚氯乙烯(PVC) 聚烯烃和其他聚合物涂覆的钢链栅栏织物的标准规格》.pdf_第5页
第5页 / 共6页
亲,该文档总共6页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、Designation: F668 17Standard Specification forPolyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric1This standard is issued under the fixed designation F668; the number immediately following the designation indicates the year of originaladoption or, in the case

2、of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscriptepsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers polyvinyl chloride and otherconforming organic polymer-coated steel cha

3、in-link fabric,coated before weaving. Polyvinyl chloride, polyolefin, andother organic polymer coating hereinafter will be designated aspolymer coating.1.2 Fabric produced from three classes of wire coatings arecovered as follows:1.2.1 Class I consists of polymer coatings extruded overzinc-coated, a

4、luminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetalalloy-coated steel wire.1.2.2 Class 2a consists of polymer coating extruded andadhered to zinc-coated, aluminum-coated, or zinc-5 %aluminum-mischmetal alloy-coated steel wire.1.2.3 Class 2b consists of polym

5、er coating fused andadhered to zinc-coated, aluminum-coated, or zinc-5 %aluminum-mischmetal alloy-coated steel wire.1.3 The values stated in inch-pound units are to be regardedas the standard. The values given in parentheses are providedfor information only.2. Referenced Documents2.1 ASTM Standards:

6、2A90/A90M Test Method for Weight Mass of Coating onIron and Steel Articles with Zinc or Zinc-Alloy CoatingsA370 Test Methods and Definitions for Mechanical Testingof Steel ProductsA428/A428M Test Method for Weight Mass of Coating onAluminum-Coated Iron or Steel ArticlesD1499 Practice for Filtered Op

7、en-Flame Carbon-Arc Expo-sures of PlasticsF552 Terminology Relating to Chain Link FencingF934 Specification for Colors for Polymer-Coated ChainLink Fence MaterialsG152 Practice for Operating Open Flame Carbon Arc LightApparatus for Exposure of Nonmetallic MaterialsG153 Practice for Operating Enclose

8、d Carbon Arc LightApparatus for Exposure of Nonmetallic MaterialsG155 Practice for Operating Xenon Arc Light Apparatus forExposure of Non-Metallic Materials2.2 U.S. Federal Standard:Fed. Std. No. 123 Marking for Shipments (Civil Agencies)32.3 U.S. Military Standards:MIL-STD-129 Marking for Shipment

9、and Storage33. Terminology3.1 DefinitionsFor definitions of terms such as chain-linkfence fabric, selvage, knuckle, twist, and diamond count, seeTerminology F552.4. Ordering Information4.1 Orders for chain-link fence fabric purchased to thisspecification shall include the following information:4.1.1

10、 Quantity.4.1.2 Class of polymer coating to be applied to the metallic-coated core wire.4.1.3 Color of coating (see 16.5.1).4.1.4 Size of mesh (see Table 1).4.1.5 Diameter of metallic-coated core wire or minimumbreaking strength, or both (see Tables 1-3).4.1.6 Height of fabric.4.1.7 Type of selvage

11、if nonstandard (see 12.1 and 12.2).4.1.8 Diamond count if nonstandard (see 9.1 and Table 2).4.1.9 Certification, if required.4.2 Any tests required other than those specifically coveredin this specification must be stipulated by the purchaser in theorder or contract.1This specification is under the

12、jurisdiction ofASTM Committee F14 on Fencesand is the direct responsibility of Subcommittee F14.40 on Chain Link Fence andWire Accessories.Current edition approved March 1, 2017. Published March 2017. Originallyapproved in 1981. Last previous edition approved in 2011 as F668 - 11. DOI:10.1520/F0668-

13、17.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from the procuring activity or as directed by t

14、he contracting office orfrom Standardization Documents Order Desk, Bldg. 4 Section D, 700 RobbinsAve.,Philadelphia, PA 19111-5094, Attn: NPODS.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United StatesThis international standard was developed in

15、 accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.14.3 All rolls of fabric ac

16、cepted by the purchaser shall bebilled to him on the basis of the original footage of the rollsbefore sampling, unless changed by contractual agreement.5. Materials5.1 Base MetalThe base metal shall be steel of suchquality and purity that, when drawn to the size of wire specifiedand coated with an o

17、rganic polymer, the finished fencing shallbe of uniform quality and have properties and characteristics asprescribed in the specification.5.2 Wire used for the manufacture of fabric shall meet therequirements of this specification and shall be capable of beingwoven into fabric without the polymer co

18、ating cracking orpeeling. The polymer coating shall be formulated and producedproperly to conform to the requirements of this specification.6. Manufacture6.1 Class 1 polymer-coated wire shall have the polymercoating extruded onto wire that conforms to the requirementsas shown in Table 3.6.2 Class 2a

19、 polymer-coated wire shall have the polymercoating extruded and adhered to wire that is zinc-coated by thehot-dip method, zinc-coated by the electrolytic process, oraluminum-coated by the hot-dip method.6.3 Class 2b polymer-coated wire shall have the polymercoating fused and adhered to wire that is

20、zinc-coated by thehot-dip method, zinc-coated by the electrolytic process, oraluminum-coated by the hot-dip method. The use of a primerprior to the application of a polymer coating may be recom-mended by the polymer manufacturer.NOTE 1Under current practice, the process for producing a Class 2bPVC c

21、oating requires the use of a primer to attain chemical bonding to thesubstrate. In any event, the polymer manufacturers recommendationshould be followed.6.4 Type of metallic coating on the steel wire substrate shallbe the choice of the producer unless otherwise specified.7. Weave7.1 The wire shall b

22、e woven throughout in the form ofapproximately uniform square mesh, having parallel sides andhorizontal and vertical diagonals of approximately uniformdimensions. The top and bottom of the fabric shall be knuckledor twisted as specified in Section 12.8. Size of Mesh8.1 The size of mesh shall conform

23、 to the requirements asshown in Table 1.8.2 The permissible variation from the specified size ofmesh shall be 618 in. (3.2 mm) for all mesh sizes over 1 in. (25mm) and 6116 in. (1.6 mm) for all mesh sizes 1 in. (25 mm)and under.8.3 Size of mesh shall be determined by unrolling a roll offabric on a f

24、lat surface and exerting tension in accordance withthe requirements of 18.2, then measuring the minimum cleardistance between the wires forming the parallel sides of themesh.9. Diamond Count9.1 Typical diamond count for each standard height isshown in Table 2. Other diamond counts are permissible,pr

25、ovided that they are consistent within a lot. The purchaserhas the option to specify the typical diamond count of 4.1.8.10. Size of Wire10.1 Chain-link fabric shall be fabricated from wire diam-eters as necessary to meet the requirements of Table 1. Thediameter shall be determined as the average of

26、two readingstaken at right angles to each other on the straight portion of theparallel sides of the mesh and measured to the nearest 0.001 in.(0.03 mm).10.2 The permissible variation from the specified diameterof the core wire over 0.105 in. (2.67 mm) shall be 60.005 in.(0.13 mm). The permissible va

27、riation for the specified diameteron core wires 0.105 in. (2.67 mm) or less shall be 60.004 in.(0.10 mm).TABLE 1 Sizes of Wire and MeshANOTE 1For custom fabric heights, see Section 11.SpecifiedDiameterof CoreWire,in.SizeCoreWireGaugeSizeofMesh,in.Height of Fence Fabric, in.0.192 6 2 36, 42, 48, 60,

28、72, 84, 96, 108, 120, 1440.192 6 134 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.148 9 2 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.148 9 134 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.148B9114 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.148 9 1 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.120 11 218 36

29、, 42, 48, 60, 72,0.120 11 2 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.120 11 134 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.120B11 114 36, 42, 48, 60, 72, 84, 96, 108, 120, 144,0.120 11 1 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.120 1158 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.120 1112 36, 42,

30、 48, 60, 72, 84, 96, 108, 120, 1440.120 1138 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.105C1258 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.105C1212 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.105C1238 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.080C1458 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.080C

31、1412 36, 42, 48, 60, 72, 84, 96, 108, 120, 1440.080C1438 36, 42, 48, 60, 72, 84, 96, 108, 120, 144ASee Table X1.1 for metric equivalents.BThis mesh size and smaller is recommended for swimming pools.CThese wire sizes should only be used on58 in.,12 in., and38 in. mesh fabrics.See Fig. 1 for criteria

32、 on mesh dimensions.FIG. 1 Mesh Dimensions for58-in.,12-in., and38-in. FabricF668 17211. Height of Fabric11.1 Chain-link fabric, unless otherwise specified by thepurchaser, shall be furnished in the standard heights shown inTable 1. Custom order fabric is available in heights to andincluding 240 ft.

33、 (6.56 m). The height of the fabric shall be theoverall dimension from the ends of twists or knuckles. Permis-sible variations from the specified height shall be 61 in. (25mm) for standard selvage on fabric with mesh sizes 1 in. (25mm) and over and 612 in. (13 mm) for all fabric with meshsizes less

34、than 1 in. (25 mm).12. Selvage12.1 Fabric with 2-in. (50.8-mm) or 218-in. (54.0-mm)mesh, in heights less than 72 in. (1829 mm), shall be knuckledat both selvages. Fabric 72 in. (1829 mm) high and over shallbe knuckled at one selvage and twisted at the other. These arethe standard selvages. Other sel

35、vage combinations will besupplied only if specified by the purchaser.NOTE 2Caution: Twisted selvages for fences under 72 in. (1829 mm)in height are not recommended because of consumer safety consider-ations.12.2 The selvages of fabrics with meshes of less than 2 in.(50.8 mm) shall be knuckled on bot

36、h edges.13. Breaking Strength13.1 Wire constituting the fabric shall meet the minimumbreaking strength shown in Table 3, as determined in accor-dance with Test Methods and Definitions A370.13.2 Specimens to establish conformance to this require-ment shall comprise individual pickets from a section o

37、f thefence fabric. The specimens shall be of sufficient length so asto be firmly gripped in the testing machine after straightening.Polymer coating may be removed from the sample by chemicalor mechanical means before testing. The actual gauge length(distance between jaws) of the specimen shall be li

38、mited to theundeformed length of wire between the two adjacent bends.14. Weight of Zinc, Aluminum, or Zinc-5 % Aluminum-Mischmetal Alloy Coatings14.1 The weight of zinc or aluminum coating shall conformto Table 4.14.2 The weight of coating shall be determined on anindividual piece of wire removed fr

39、om the fabric. This speci-men may be any length of wire over 12 in. (305 mm) and shallinclude both bends and straight sections, but shall not includeeither twists or knuckles.TABLE 2 Typical Diamond CountANOTE 1Other diamond counts are permitted (see Section 9 on Diamond Count).NOTE 2 For fabric hei

40、ghts over 144 in., see Section 9.NominalDiameterCore Wire, in.Size ofMesh, in.Height of Fence Fabric, in.36 42 48 60 72 84 96 108 120 1440.192 2 1012 1212 1312 1712 2012 2412 2712 3112 3412 41120.148 2 1012 1212 13 1712 2012 2412 2712 3112 3412 41120.148 134 1112 1312 1512 1912 2312 2712 3112 3512 3

41、912 47120.148 114 17 21 23 29 35 41 46 52 56 700.120 2 1012 1212 1412 1712 2012 24120.120 218 912 1112 1312 1612 19120.120 134 1112 1312 1512 1912 2312 2712 3112 3512 3912 47120.120 114 17 21 23 29 35 41 46 52 56 700.120 20 23273345536167690.120580.120120.120380.105580.10512 see Fig. 10.105380.08058

42、0.080120.08038ASee Table X1.1 for metric equivalents.TABLE 3 Breaking Strength of Core WireSpecified Diameter of Core Wire, in.(mm)Minimum Breaking Strengthlbf (N)0.192 (4.88) 2170 (9650)0.148 (4.76) 1290 (5740)0.120 (3.05) 850 (3780)0.105 (2.67) 650 (2890)0.080 (2.03) 380 (1690)TABLE 4 Weight of Zi

43、nc, Aluminum, or Zinc-5 % Aluminum-Mischmetal Alloy CoatingsSpecified Diameter ofCore Wire,in. (mm)Minimum Weight ofZinc or Zinc-5 % Aluminum-Mischmetal Alloy Coating,oz/ft2(g/m2)Minimum Weight ofAluminum Coating,oz/ft2(g/m2)0.192 (4.88) 0.40 (122) 0.20 (61)0.148 (3.76) 0.30 (92) 0.20 (61)0.120 (3.0

44、5) 0.30 (92) 0.20 (61)0.105 (2.67) 0.30 (92) 0.20 (61)0.080 (2.03) 0.25 (76) 0.20 (61)F668 17314.3 The weight of zinc or zinc-5 % aluminum-mischmetalalloy coating shall be determined by the method contained inTest Method A90/A90M after stripping the polymer coating asoutlined in Section 15.14.4 The

45、weight of aluminum coating shall be determinedby the method contained in Test Method A428/A428M, afterstripping the polymer coating as outlined in Section 15.15. Thickness of Polymer Coating15.1 The thickness of the polymer coating shall be inaccordance with Table 5.15.2 The thickness of polymer coa

46、ting shall be determinedon an individual piece of wire removed from the fabric. Thisspecimen may be any length of wire over 12 in. (305 mm) andshall include both bends and straight sections, but shall notinclude either twists or knuckles.15.3 For Class 1 and Class 2a material, mechanically stripthe

47、polymer coating from the wire and measure the minimumand maximum thickness of the polymer coating with a suitablemicrometer.15.4 For Class 2b material, strip the polymer coating bychemical or mechanical means and determine the diameter ofthe bare wire. Scrape the coating from one side of the wire an

48、dmeasure the reduced diameter with a micrometer. The thick-ness of coating at this point is the difference between themeasurement thus obtained and the measured diameter of thebare wire. In a similar manner, determine the thickness ofcoating at right angles to the first determination.15.5 When remov

49、ing polymer coating by scraping, takecare not to remove any of the metallic surface.16. Properties of Polymer-Coated Wire16.1 The polymer-coated wire from which the fabric iswoven shall have a demonstrated ability to conform to thefollowing requirements:16.2 Adhesion Tests:16.2.1 Class 2a must conform to the requirements of 16.2.2.Class 2b must conform to the requirements of 16.2.3.16.2.2 Three specimens from each lot shall be tested.Measure a distance of34 in. (19 mm) from the end

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > ASTM

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1