1、 ATIS-0404130-0013 Design Layout Report Guidelines For Access Service Industry Support Interface (DLR-ISI) Version 13 ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2018 As a leading technology and solutions development organization, ATIS brings together the top global ICT compani
2、es to advance the industrys most-pressing business priorities. Through ATIS committees and forums, nearly 200 companies address cloud services, device solutions, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations and more. These priorities
3、 follow a fast-track development lifecyclefrom design and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North A
4、merican Organizational Partner for the 3rdGeneration Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission
5、(CITEL). For more information, visit www.atis.org. ATIS 0404130-0013 Design Layout Report Guidelines for Access Service Industry Support Interface (DLR-ISI). Is an ATIS standard developed by the Ordering Solutions Committee Access Service Ordering Subcommittee under the ATIS Ordering and Billing For
6、um (OBF) Published by Alliance for Telecommunications Industry Solutions 1200 G Street, NW, Suite 500 Washington, DC 20005 Copyright 2017 by Alliance for Telecommunications Industry Solutions All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval s
7、ystem or otherwise, without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. ATIS is online at . Limited Exception for “Customized” Forms. In recognition of the business needs and processes implemented by companies throughout the industry, ATIS grants the
8、following limited exception to the copyright policy. The forms contained within, once “Customized,” may be reproduced, distributed and used by an individual or company provided that the following is placed on all “Customized” forms: ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2
9、018 “This form/screen is based upon the Ordering and Billing Forums (OBF) industry consensus approved guidelines, found in the Access Service Ordering Guidelines (ASOG) document. The ASOG may be obtained by contacting the Alliance for Telecommunications Industry Solutions (ATIS) at 1-800-387-2199 or
10、: https:/www.atis.org/atis/docstore/index.asp.” For purposes of this limited exception, the term “Customized” means, the modification, by a company, of an ASOG form to be issued to a trading partner to make it company specific by, for example, adding a company logo, graying-out optional fields not r
11、equired by that specific issuing company, and converting into an electronic format/screen. This limited exception does not affect the ASOG document itself which remains copyrighted and may not be reproduced in whole or part. Telcordia Technologies, Inc. was formerly known as Bell Communications Rese
12、arch, Inc. or Bellcore. Portions of this document, previously published by Bellcore, may still reflect the former name as it was embedded in the documentation under a prior license from the owners of the BELL trademark, which license has now expired. The use of this name does not suggest that Telcor
13、dia Technologies has licensed the names BELL, Bell Communications Research, or Bellcore for new uses or that the owners of the BELL trademark sponsor, endorse or are affiliated with Telcordia Technologies or its products. Printed in the United States of America. Notice of Disclaimer and Limitation o
14、f Liability The information provided in this document is directed solely to professionals who have the appropriate degree of experience to understand and interpret its contents in accordance with generally accepted engineering or other professional standards and applicable regulations. No recommenda
15、tion as to products or vendors is made or should be implied. ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2018 NO REPRESENTATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHNICALLY ACCURATE OR SUFFICIENT OR CONFORMS TO ANY STATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHE
16、R, NO REPRESENTATION OR WARRANTY IS MADE OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT OF ANY SUM RECEIVED IN PAYMENT BY ATIS FOR THIS DOCUMENT, WITH RESPECT TO ANY CLAIM, AND IN NO EVENT
17、SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES ANY AND ALL USE OF OR RELIANCE UPON THIS INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK OF THE USER. DLR-ISI 13 SYNOPSIS OF CHANGES Page 1 of 3 DLR-ISI 12 CHANGES - ISSUES INCLUDED IN THI
18、S SYNOPSIS ISSUE NUMBER DESCRIPTION3594 ASOG: Remove date fields related to confirming DLR reports due to lack of useDLR-ISI 13 SYNOPSIS OF CHANGES Page 2 of 3 The following table depicts the type of change category definitions: TYPE OF CHANGE = CATEGORY DEFINITIONSNEW = Adding a new field REM = Rem
19、oving an existing field FN = Field/Tag name change (e.g., EXEMPT REASON changed to ER) FORMAT = Field format change (e.g., moved to another section of the form, etc.) DEF = Definition change DEFN = Definition notes addition, change, deletion VE = Valid entries addition, change, deletion VEN = Valid
20、entry notes addition, change, deletion USE = Usage statement change USES = Usage strip change USEN = Usage notes addition, change, deletion DC = Data characteristics change (e.g., change from numeric to alpha/numeric) DCL = Data characteristics length change DCN = Data characteristics note addition,
21、 change, deletion EX = Example addition, change, deletion EXN = Example notes addition, change, deletion FORM = Changes made to the ASR forms (i.e., additions, rearrangements, field length changes or deletions of fields)GLOSSARY = Identifies changes within the glossary sections (i.e., additions or d
22、eletions of fields) TEXT = Identifies changes within the text of a section (i.e., additions or deletions of fields) DLR-ISI 13 SYNOPSIS OF CHANGES Page 3 of 3 SYNOPSIS OF CHANGES PRAC # ISSUE # Field/ Section Type Of Change Description of Change Field Length DLR 3594 GENERAL TEXT Removed paragraphs
23、2.3 and 2.4 regarding DLR. Renumbered subsequent paragraphs.NOTES: The following global editorial changes were made to the DLR-ISI to update the format: All fonts were updated to Arial, Size 10 with the exception of headings which may be a larger font size. All headers were updated from version 12 t
24、o version 13 and to reflect current release dates. The format of fields in Section 4, Descriptions of Valid Form Entries was updated to match the current style/format used in ASOG; no content was changed. All blank pages were removed. ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17,
25、 2018 DESIGN LAYOUT REPORT GUIDELINE FOR ACCESS SERVICES Table of Contents 1. INTRODUCTION . 1-1 2. GENERAL . 2-1 3. DLR CONTENT AND FORMAT . 3-1 4. DESCRIPTIONS OF VALID FORM ENTRIES . 4-1 4.1 ADMINISTRATIVE AND ADDITIONAL DETAIL FORMS ENTRIES 4-2 4.1.1 ADMINISTRATIVE SECTION . 4-2 1. IC Interexcha
26、nge Carrier/Access Customer Name 4-2 2. PON Purchase Order Number 4-3 3. VER Version Identification 4-4 4. ECIA EC (Provider) Initiated Activity . 4-5 5. PG Page Number of Pages 4-6 6. CKR Customer Circuit Reference . 4-7 7. ISS DLR Issue Date 4-8 8. CO Provider Company 4-9 9. ORD Order Number 4-10
27、10. DLR_OF_ DLR_of_ . 4-11 11. ISS NO Issue Number . 4-12 12. ECCKT Exchange Company Circuit ID . 4-13 13. REF NUM Reference Number . 4-14 14. OLDECCKT Old Exchange Company Circuit ID . 4-15 15. TSC Two Six Code 4-16 16. CLO Circuit Layout Order Number 4-17 17. TSP Telecommunications Service Priorit
28、y 4-18 18. DSGCON Design/Engineering Contact . 4-19 19. TEL Telephone Number (DSGCON) . 4-20 20. EC DSGCON Provider Design/Engineering Contact 4-21 21. EC TEL Provider Telephone Number (DSGCON) 4-22 22. EC MCO Provider Maintenance Control Office . 4-23 23. EC OCO Provider Operations Control Office 4
29、-24 24. PTD Plant Test Date 4-25 25. DD Due Date . 4-26 26. REMARKS Remarks . 4-27 4.1.2 DESIGN SECTION . 4-28 27. ACTL Access Customer Terminal Location 4-28 28. LT Link Type 4-29 29. APOT - Additional Point of Termination . 4-30 30. SLC - Signaling Link Code . 4-31 31. TCIC - Trunk Circuit Identif
30、ication Code 4-32 ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2018 32. CKLT - Bridging Location . 4-33 33. CSPC - Customers Signaling Point Code . 4-34 34. PRILOC - Primary Location 4-35 35. SPOT (PRI) - Secondary Location Point of Termination Primary Location 4-36 36. ECSPC -
31、Access Provider Signaling Point Code . 4-37 37. SECLOC - Secondary Location 4-38 38. SPOT (SEC) - Secondary Location Point of Termination Secondary Location . 4-39 39. NC - Network Channel Code 4-40 40. NCI - Network Channel Interface Code 4-41 41. TLV - Transmission Level . 4-42 42. SECNCI - Second
32、ary Network Channel Interface Code 4-43 43. SECTLV - Secondary Transmission Level . 4-44 44. N - Note Indicator . 4-45 45. LOCN - Location . 4-46 46. EQPTYPE - Equipment Type . 4-47 47. RELAY RACK - Relay Rack . 4-48 48. UNIT - Unit 4-49 49. FACDESG - Facility/Cable Designation . 4-50 50. FACTYPE -
33、Facility Type . 4-51 51. CHANNEL - Channel 4-52 52. SV - Signal/Voice Path Type 4-53 53. Z-A - Transmission Level Point (TLP) - Z to A Direction 4-54 54. A-Z - Transmission Level Point (TLP) - A to Z Direction 4-55 55. INC MI - Incremental Mileage . 4-56 56. MISC - Miscellaneous Information . 4-57 4
34、.2 END USER FORM ENTRIES . 4-58 4.2.1 PRIMARY LOCATION SECTION . 4-58 57. EU STREET - End User Street Address 4-58 58. EU BLDG - Building 4-59 59. EU FLR - Floor . 4-60 60. EU ROOM - Room 4-61 61. EU CITY - City 4-62 62. EU STATE - State 4-63 63. EU TERM - End User Termination . 4-64 64. EU TERM 4W
35、- End User Termination 4 Wire . 4-65 65. E RCV - End User Receive Level 4-66 66. E XMT - End User Transmit Level 4-67 67. E XMT 4W - End User 4 Wire Transmit Level 4-68 4.2.2 SECONDARY LOCATION SECTION 4-69 68. EU STREET - End User Street Address 4-69 69. EU BLDG - Building 4-70 70. EU FLR - Floor .
36、 4-71 71. EU ROOM - Room 4-72 72. EU CITY - City 4-73 73. EU STATE - State 4-74 74. EU TERM - End User Termination . 4-75 75. EU TERM 4W - End User Termination 4 Wire . 4-76 76. E XMT - End User Transmit Level 4-77 77. E RCV - End User Receive Level 4-78 78. E RCV 4W - End User 4 Wire Receive Level
37、. 4-79 4.3 ADDITIONAL NOTES FORM ENTRIES 4-80 4.3.1 NOTE SECTION . 4-80 79. N - Note Indicator . 4-80 80. NOTES - Notes . 4-81 ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2018 5. ALPHA/NUMERIC GLOSSARY . 5-1 6. DESIGN LAYOUT REPORT (DLR) FORM NUMBERED 6-1 7. DESIGN LAYOUT REPOR
38、T (DLR) FORM CAMERA READY . 7-1 ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2018 1-1 1 INTRODUCTION 1.1 In order for a Provider to provision lines, trunking and transport services, it is necessary that the Provider and the Customer communicate. One document which provides part
39、of this communication is the Design Layout Report (DLR). 1.2 The DLR is initiated by the Provider. It includes pertinent information that will permit the Customer to review the design and ensure the Providers ability to provide the service being ordered. 1.3 The DLR is divided into four forms: the D
40、LR Administrative Form, the DLR Additional Detail Form, the DLR End User Information Form and the DLR Additional Notes Form. Further description of the information contained on these forms and their uses in the design of various types of services follow in section 3 of this document. 1.4 All referen
41、ces in this document regarding Feature Group A (FGA) and/or Feature Groups B, C and D (FGB, FGC, FGD) include the equivalent line-side Basic Serving Arrangement (BSA) and equivalent trunk-side BSA respectively. 1.5 In an effort to ensure that all possible providers, users and customers of services a
42、re addressed in all issues and documentation, the terms Provider and Customer will be used, representing the two roles involved with each transaction. Throughout this document, the terms IC (Interexchange Carrier) and EC (Exchange Carrier) may be used to describe the categories Customer and Provider
43、. This is to maintain consistency with prior uses of this practice, though their use does not imply exclusivity within the Customer and Provider categories. ATIS-0404130-0013 Issued September 22, 2017 Implemented March 17, 2018 2-1 2 GENERAL 2.1 Where the tariff/contract/negotiation requires, a DLR
44、should be issued by the Provider whenever a Customer requests one via the ASR. Administrative changes to the service are excluded. A DLR may be issued for the discontinuance of a switched access digital interface. 2.2 If the service cannot be provided as ordered the Provider will notify the Customer
45、 and the provisioning process will stop until: A. The service ordered can be provided by the Provider, or B. The service ordered is changed by the Customer or C. The service ordered is canceled by the Customer 2.3 Reasonable requests for resends and reissues are a normal part of the business and may
46、 be supplied when requested by the Customer. The Provider will identify a DLR point of contact to which requests may be forwarded. 2.4 If a DLR is requested after the service is in effect, it can be provided; however, the Customer may incur additional charges from the Provider for assembling the DLR
47、(s). The Customer should forward their requests to the Providers DLR point of contact and each request will be handled on an Individual Case Basis (ICB) for charges and response time. 2.5 Requests to issue duplicate DLRs to the same location or to multiple locations should be negotiated between the
48、Customer and appropriate Provider. 2.6 This practice is reissued to clarify current definitions as recommended by users of this practice. Additions, deletions and significant changes are summarized in the synopsis of changes. 2.7 The Design Layout Report Guideline does not convey licensing rights to
49、 non-COMMON LANGUAGE1licensees to use the COMMON LANGUAGE code sets identified throughout the Design Layout Report Forms in their internal operations. Where COMMON LANGUAGE is provided, its intended use by non-COMMON LANGUAGE licensees is limited. Allowable uses will be specified by the COMMON LANGUAGE licensee per their COMMON LANGUAGE contract. 2.8 Options described in this practice may not be applicable to individual provider tariffs; therefore, use of either the field or valid entries within the field is b
