1、AWS QC1: 2016Specification for AWS Certification of Welding InspectorsAWS QC1:2016Specification for AWS Certification of Welding Inspectors6th EditionSupersedes AWS QC1:2007Prepared by the American Welding Society (AWS) Subcommittee on Certification of Welding InspectorsUnder the Direction of the AW
2、S Certification CommitteeApproved by the AWS Board of DirectorsAbstractThis specification defines the requirements and program for the American Welding Society to certify welding inspectors. The certification of visual welding inspectors requires documentation of experience, satisfactory completion
3、of an examination, and proof of visual acuity. The examination tests the inspectors knowledge of welding processes, welding procedures, destructive tests, terms, definitions, symbols, reports, safety, and responsibilities.iiAWS QC1: 2016ISBN: 978-0-87171-882-2American Welding Society8669 NW 36th St.
4、, #130, Miami, FL 331662016 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaPhotocopy Rights. No portion of this specification may be reproduced, stored in a retrieval system, or transmitted in any form, including mechanical, photocopying, recording, or otherwise
5、, without the prior written permission of the copyright owner.Authorization to photocopy items for internal, personal, or educational classroom use only or the internal, personal, or educational classroom use only of specific clients is granted by the American Welding Society provided that the appro
6、priate fee is paid to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, tel: (978) 750-8400; Internet: .iiiAWS QC1: 2016Statement on the Use of American Welding Society Certification StandardsAll standards (codes, specifications, recommended practices, methods, classifications,
7、and guides) of the American Welding Society (AWS) are voluntary consensus standards that are developed through a consensus standards development process that brings together volunteers representing varied viewpoints and interests to achieve consensus. While the AWS administers the process and establ
8、ishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in its standards. Further, given the rapid changes in the field, AWS cannot warrant that the certification
9、standard will at all times reflect the most current knowledge.Certification is achieved by satisfying a combination of defined education, experience, and/or examination requirements. Certification is not an assurance of future competence or ability.An endorsement to a certification adds to a certifi
10、cation by indicating demonstration of a knowledge, skill, or ability in a particular skill area that may not be sufficiently broad or unique to support a separate and distinct certification designation. An endorsement is not an indication of approval by AWS or an assurance of future performance.AWS
11、disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, including special, indirect, consequential, or compensatory damages, directly or indirectly resulting from the negligent conduct or other acts or omissions of any individual certified by AWS.In i
12、ssuing and making this standard available, AWS is neither undertaking to render professional or other services for or on behalf of any person or entity, nor is AWS undertaking to perform duty owed by any person or entity to someone else. Employers and other persons utilizing the services individuals
13、 certified by AWS are responsible for determining the qualifications, competence, and ability of those individuals. This standard may be superseded by new editions. This standard may also be corrected through publication of amendments or errata, or supplemented by publication of addenda. Information
14、 on the latest editions of AWS standards including amendments, errata, and addenda is posted on the AWS web page (www.aws.org). Users should ensure that they have the latest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade n
15、ame. Users of this standard accept any and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement of any patent or product trade name resulting from the use of this standard.Finally, the AWS does not monitor, police, or enforce compliance wit
16、h this standard, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are posted on the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this standard may only
17、be obtained by sending a request, in writing, to the appropriate certification committee. Such requests should be addressed to the American Welding Society, Attention: Managing Director, Certification Department, 8669 NW 36th St., #130, Miami, FL 33166 (see Annex A). With regard to technical inquiri
18、es made concerning AWS standards, oral opinions on AWS standards may be rendered. These opinions are offered solely as a convenience to users of this standard, and they do not constitute professional advice. Such opinions represent only the personal opinions of the particular individuals giving them
19、. These individuals do not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at an
20、y time by the AWS Certification Committee. Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in improving this standard are required and should be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS Certification Comm
21、ittee and the author of the comments will be informed of the Committees response to the comments. Guests are invited to attend all meetings of the AWS Certification Committee to express their comments verbally. Procedures for appeal of an adverse decision concerning all such comments are provided in
22、 the Rules of Operation of the Certification Committee. A copy of these rules can be obtained from the American Welding Society, 8669 NW 36th St., #130, Miami, FL 33166.ivAWS QC1: 2016This page is intentionally blank.vAWS QC1: 2016PersonnelAWS Certification CommitteeG. G. Hlifka, Chair First Energy
23、Corporation M. L. Deckard, 1st Vice Chair ConsultantP. A. Grimm, 2nd Vice Chair Modern Welding CompanyR. L. Arn, 3rd Vice Chair Trinity Industries, Inc.J. Gayler, Secretary American Welding SocietyE. A. Abbott Ironworkers International UnionH. Brummel H. Bruce Brummel, PE, LLCN. A. Chapman Westingho
24、use Electric CompanyH. B. Craft Trinity Industries, Inc.I. A. Cross Valiant TMSG. J. Frederick Electric Power Research InstituteJ. E. Greer Moraine Valley Community CollegeM. T. Harris International Training InstituteR. L. Holdren ARC Specialties, Inc./Welding Consultants, LLCJ. I. Johnson North Dak
25、ota State College of ScienceJ. T. Mansfield EntergyA. J. Moore Marion Testing clarified endorsement to include knowledge, skill, or ability; defined examination; modified nondestructive examination (NDE) definition; added definitions for reexamination and retest; modified definitions for specificati
26、on and standard. 4.4 Clarified that the CAWI can perform inspections only under the active supervision of a SCWI or CWI.5.2 Modified the range in the number of years applicants for SCWI shall be certified as a CWI.5.3 Clarified application requirements.6.1.4 New subclause describes alternative certi
27、fication for the SCWI.6.2.2 CWI Part BPractical examination, minimum number of questions reduced to 40.6.2.5 Clarified retesting parameters.6.2.5.1 New subclause describes full 3-Part Reexamination requirements.6.2.5.2 New subclause describes 1-Part or 2-Part Retest requirements.xAWS QC1: 20166.2.5.
28、3 New subclause adds language that a retest for Part CCode Book must use the same code used for the original examination.6.2.6 New subclause describes exemption from retaking certain exam parts passed by a Certified Welding Educator (CWE) for the CWI exam.6.2.7 New subclause adds language regarding
29、split examinations.6.2.7.1 New subclause adds language regarding split examinations for Part A including retests, retest limitations, and recognition.6.2.7.2 New subclause adds language regarding split examinations for Parts B the visual acuity time period changed from seven (7) months to one (1) ye
30、ar prior to the examination or certification expiration date; visual acuity records valid for up to one (1) year from exam date.8.1.2 Eye examination results due date extended to 60 days after examination date.8.2 New subclause describing passport-style color photograph requirements and acceptance.1
31、0.1 New language clarifying that certification becomes effective on the first day of the month following the date of examination; the wallet card will include a photo.10.2 Adds photo to information to be shared by AWS staff as a result of requests for verification of status and certification number.
32、11.2.3 Adds language that the SCWI, CWI, and CAWI will not utilize the certification stamp or number connected to a lapsed or terminated SCWI, CWI, or CAWI status.11.2.5 Clarifies active supervision as one of the parameters which an inspector can sign off work.11.4.4 Language modified regarding conf
33、lict of interest conditions allowed for an inspector whose work is performed while being a public official.15.1 CAWI certification period clarified to be up to a three-year period.15.1.1 Eliminated redundancy with 15.2.1; clarified that CAWI testing for CWI status fall under CWI examination requirem
34、ents.15.2.2 Changed renewal applications accepted no earlier than 11 months prior to the certification expiration date from previous 6 months prior.15.3.2 New subclause describes that a renewal may be accepted after the 60-day grace period but within one year of expiration, noting that administrativ
35、e late fees may be applied.15.4 Clarified continuous inactivity refers to work inactivity.16.1 Changed 9-year recertification application accepted no early than 11 months prior to the certification expiration date from previous 6 months prior; added language regarding a 60-day administrative extensi
36、on.16.3.1 New language stating that the endorsement does not need to be current at the time of application for CWI recertification.16.4.2 New language allowing for broader course content relevance to subject or job functions in AWS B5.1.16.5.1 Expanded language regarding earning Professional Develop
37、ment Hours (PDHs).16.5.2 Increased the maximum PDH hours to 40 from previous 20; added proof of attendance as verification.16.5.3 Clarified non-AWS conferences allowed for PDHs; clarified proof of participation required.xiAWS QC1: 201616.5.9 New subclause allowing PDHs for items not directly listed
38、in AWS B5.1 contingent upon AWS Certification Department approval.16.7 New language allowing CWI 9-year recertification applicants to switch the recertification means if within the deadline.16.7.1 New subclause specifies the instances in which all three Parts A, B, and C are required for CWI 9-year
39、recertification.16.7.2 New subclause describes circumstances in which an individuals certification expires and is then considered as a new applicant.List of AWS Documents on Certification replaces QC4 and QC7 with QC47; adds QC9, QC14, and QC20.Comments and suggestions for the improvement of this st
40、andard are welcome. They should be sent to the Secretary, AWS Certification Committee, American Welding Society, 8669 NW 36th St., #130, Miami, FL 33166.xiiAWS QC1: 2016This page is intentionally blank.xiiiAWS QC1: 2016Table of ContentsPage No.Personnel .vDedication viiForeword . ix1. Scope 12. Leve
41、ls of Certification and Endorsements . 12.1 Senior Certified Welding Inspector (SCWI) 12.2 Certified Welding Inspector (CWI) 22.3 Certified Associate Welding Inspector (CAWI) . 22.4 Endorsements 23. Definitions 24. Functions of Certified Personnel 35. Education and Experience Requirements . 36. Exam
42、ination Requirements for SCWI and CWI 46.1 Senior Certified Welding Inspector 46.2 Certified Welding Inspector . 47. Achieving Certified Associate Welding Inspector (CAWI) Certification 58. Visual Acuity and Photo Requirements . 68.1 Visual Acuity . 68.2 Photos 69. Reciprocity . 610. Certification .
43、 610.1 Documentation 610.2 Verification 611. Code of Ethics, Rules of Conduct, and Practice 711.1 Integrity . 711.2 Responsibility to the Public . 711.3 Public Statements 711.4 Conflict of Interest . 711.5 Solicitation of Employment . 811.6 Unauthorized Practice . 812. Revocation . 812.1 Committee .
44、 812.2 Courts 813. Reinstatement 8xivAWS QC1: 201614. Upgrading of CAWI Certification to CWI 815. Renewals 916. 9-Year Recertification for SCWI and CWI . 9Annex A Guidelines for Preparation of Inquiries for AWS Certification Committees 13List of AWS Documents on Certification . 151AWS QC1: 2016Speci
45、fication for AWS Certification of Welding Inspectors1. Scope1.1 This specification establishes the requirements for American Welding Society (AWS) certification of welding inspection personnel. It describes how personnel are certified, and the principles of conduct and practice by which certificatio
46、n may be maintained. Any oral or written claim of certification under the guidelines established herein shall be made only by those individual SCWIs, CWIs, and CAWIs who are, at the time of the claim, current and in compliance with all sections of this specification. This specification meets or exce
47、eds the requirements of AWS B5.1:2013, Specification for the Qualification of Welding Inspectors. This specification supersedes AWS QC1:2007.1.2 The three levels of certification are Senior Certified Welding Inspector (SCWI), Certified Welding Inspector (CWI), and Certified Associate Welding Inspect
48、or (CAWI). 1.3 In the certification process, AWS conducts an examination to determine a persons general knowledge of welding inspection and related technical areas. No determination is made of an individuals capabilities in applying that knowledge within a specific work environment or under actual w
49、orking conditions.1.4 It shall be the responsibility of the employer to determine that the SCWI/CWI/CAWI is capable of performing the duties involved in his or her particular welding inspection assignment.1.5 This specification is intended to supplement the requirements of an employer, code, or other documents and shall not be construed as a preemption of the employers responsibility for the work or for the performance of the work.1.6 Statement on Safety. Safety and health issues and concerns are beyond the scope of this specification and therefore are not addressed herein. Safety and
