1、 AWWA Standard SM Fabricated Aluminum Slide Gates Effective date: Dec. 1, 2014. First edition approved by AWWA Board of Directors Jan. 22, 2012. This edition approved June 8, 2014. Approved by American National Standards Institute July 23, 2014. ANSI/AWWA C562-14 (Revision of ANSI/AWWA C562-12) Copy
2、right 2015 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information no
3、rmally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of an
4、y product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to
5、represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Association. The action becomes
6、effective on the first day of the month fol- lowing the month of Journal - American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An American Nat
7、ional Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purchasing, or using pr
8、oducts, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state on their own respons
9、ibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completion of t
10、he ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. Purchasers of American National Standards may receiv
11、e current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900, or emailing infoansi.org. ISBN-13, print: 978-1-62576-041-8 eISBN-13, electronic: 978-1-61300-305-3DOI: http:/dx.doi.org/10.129
12、99/AWWA.C562.14 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purposes, wit
13、hout the written permission of the publisher. Copyright 2014 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or photoco
14、pied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2015 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Subcommittee for C562, Fabricated Aluminum Slide Gates, which developed t
15、his standard, had the following personnel at the time: Ron Niedzwiecki, Chair R.M. Scott, Pelham, Mass. (AWWA) T.J. Cluin, Golden Harvest Inc., Pflugerville, Texas (AWWA) M. Larrea, ORBINOX Valves International, San Sebastian, Guipuzcoa, Spain (AWWA) D. Niblett, JASH USA, Weldon Spring, Mo. (AWWA) R
16、. Niedzwiecki, Whipps Inc., Athol, Mass. (AWWA) The AWWA Standards Committee on Slide Gates, which reviewed and approved this standard, had the following personnel at the time of approval: Kirk H. Hipps, Chair General Interest Members A. Ali, ADA Consulting, Surrey, B.C., Canada (AWWA) S. Barraco, A
17、ECOM, Dallas, Texas (AWWA) M.D. Bennett, MWH Global, Cleveland, Ohio (AWWA) D.M. Flancher,* Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA) L.C. Gerbig, Lee C. Gerbig LLC, Avon, Ind. (AWWA) B. Hasanabadi, CH2M HILL, Redding, Calif. (AWWA) K.H. Hipps, CDM Smith, Chicago, Ill. (AWWA) J.E. Koch,
18、 HDR Engineering Inc., La Conner, Wash. (AWWA) J.S. Lapsley, CDM Smith, Charlotte, N.C. (AWWA) C. Reames, CB and NSF/ANSI 61, Drinking Water System ComponentsHealth Effects. 4. Other references, including AWWA standards, Food Chemicals Codex, Water Chemical Codex, and other standards considered appr
19、opriate by the state or local agency. Various certification organizations may be involved in certifying products in accor- dance with NSF/ANSI 61. Individual states or local agencies have authority to accept or accredit certification organizations within their jurisdictions. Accreditation of certi-
20、fication organizations may vary from jurisdiction to jurisdiction. Annex A, “Toxicology Review and Evaluation Procedures,” to NSF/ANSI 61 does not stipulate a maximum allowable level (MAL) of a contaminant for substances not regulated by a USEPA final maximum contaminant level (MCL). The MALs of an
21、unspecified list of “unregulated contaminants” are based on toxicity testing guidelines (noncarcinogens) and risk characterization methodology (carcinogens). Use of Annex A procedures may not always be identical, depending on the certifier. ANSI/AWWA C562 does not address additives requirements. Thu
22、s, users of this standard should consult the appropriate state or local agency having jurisdiction in order to 1. Determine additive requirements, including applicable standards. 2. Determine the status of certifications by parties offering to certify products for contact with, or treatment of, drin
23、king water. 3. Determine current information on product certification. II. Special Issues. This standard has no applicable information for this section. III. Use of This Standard. It is the responsibility of the user of an AWWA standard to determine that the products described in that standard are s
24、uitable for use in the particular application being considered. * NSF International, 789 North Dixboro Road, Ann Arbor, MI 48105. American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Both publications available from National Academy of Sciences, 500 Fifth Str
25、eet, NW, Washington, DC 20001. Copyright 2015 American Water Works Association. All Rights Reserved. x III.A. Purchaser Options and Alternatives. The following items should be provided by the purchaser: 1. Standard usedthat is, ANSI/AWWA C562, Fabricated Aluminum Slide Gates, of latest revision. 2.
26、Whether compliance with NSF/ANSI 61, Drinking Water System ComponentsHealth Effects, is required. 3. Number of units required. 4. Type of closure: conventional, flush-bottom, or downward opening. a. Size, by width and by height of clear opening. 5. Design head measured from the surface of water/wast
27、ewater to centerline of gate, in feet (meters), for the following: a. Seating head. b. Unseating head. 6. Operating head measured from surface of water or wastewater to centerline of gate, in feet (meters), in both seating and unseating conditions. 7. Type of lift actuator: manual, electric-motordri
28、ven, or hydraulic-cylinder. If electric-motordriven or hydraulic-cylinder, the purchaser should refer to ANSI/ AWWA C542, Electric Motor Actuators for Valves and Slide Gates, or ANSI/AWWA C541, Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates, respectively, of late
29、st revision. 8. Conventional mounted frame or self-contained thrust reaction frame. 9. Upward- or downward-opening gate. 10. If hydraulic or pneumatic actuators are specified, provide cylinder operating media and pressure (refer to ANSI/AWWA C541, Hydraulic and Pneumatic Cylinder and Vane-Type Actua
30、tors for Valves and Slide Gates, of latest revision). 11. Definition of any special design and construction required for conditions beyond the scope of this standard, such as throttling service, environmental condi- tions, sediment or grit exposure, and intended operation frequency and duration. 12.
31、 Frequency of operation and special operating conditions, such as ice formation. 13. An installation-requirement drawing showing clearance, wall and floor thicknesses, details of wall pipe and thimble installation, and location of actuator. 14. Any drawings and material documents required of the supplier or of the manufacturer (Sec. 4.1 and 4.2). 15. Details of other federal, state or provincial, and local requirements (Sec. 4.3). 16. If test records must be viewed (Sec. 4.3.2). Copyright 2015 American Water Works Association. All Rights Reserved.
