1、BRITISH STANDARD BS 4361-8: 1988 ISO 7569:1986 Woodworking machines Part 8: Specification for planing machines for two-, three- or four-side dressing ISO title: Woodworking machines Planing machines for two-, three- or four-side dressing Nomenclature and acceptance conditions UDC 674.056:621.912BS43
2、61-8:1988 This British Standard, having been prepared under the directionof the Machine, Engineers and Hand Tools Standards Committee, was published under the authority ofthe Board of BSI and comes into effect on 30 November1988 BSI 12-1999 The following BSI references relate to the work on this sta
3、ndard: Committee reference MTE/23 Draft for comment 81/80431 DC ISBN 0 580 16743 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Committee (MTE/-) to Technical Committee MTE/23 upon which the
4、 following bodies were represented: Advanced Manufacturing Technology Research Institute British Furniture Manufacturers Federation British Railways Board British Woodworking Federation Department of the Environment, Building Research Establishment (PrincesRisborough Laboratory) Department of Trade
5、and Industry, Mechanical Engineering and Manufacturing Technology Division (Mmt) Federation of British Hand Tool Manufacturers Furniture Industry Research Association Furniture, Timber and Allied Trades Union Health and Safety Executive Institute of Machine Wood Working Technology Ltd. National Sawm
6、illing Association Saw Association Timber Research and Development Association Union of Construction, Allied Trades and Technicians Woodworking Machinery Suppliers Association Ltd. Amendments issued since publication Amd. No. Date of issue CommentsBS4361-8:1988 BSI 12-1999 i Contents Page Committees
7、 responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 References 1 3 Preliminary remarks 1 4 Nomenclature 2 5 Acceptance conditions and permissible deviations Geometrical tests 5 Annex Equivalent terms 9 Publications referred to Inside back coverBS4361-8:1988 ii B
8、SI 12-1999 National foreword This Part of BS 4361 has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Committee and implements agreements of the International Organization for Standardization (ISO). It is identical with ISO7569:1986 “Woodworking machines Planing
9、machines for two-, three- or four-side dressing Nomenclature and acceptance conditions”. Together with BS 4361-4 to BS 4361-7 and Parts BS 4361-9 to BS 4361-12, this Part of BS 4361 supersedes BS 4361-2:1968 which is withdrawn. Diagrams. For reasons of simplicity the diagrams in this standard illust
10、rate only one type of machine. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is draw
11、n especially to the following. The comma has been used as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “this International Standard” appear, referring to this standard, they should be read as “this Part of
12、 BS4361”. In clauses1 and2 reference is made to ISO7984 for information only. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself con
13、fer immunity from legal obligations. Cross-references International Standard Corresponding British Standard ISO 230-1:1986 BS 3800:1964 Methods for testing the accuracy of machine tools (Technically equivalent) Summary of pages This document comprises a front cover, an inside front cover, pages i an
14、d ii, pages1 to 10, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS4361-8:1988 BSI 12-1999 1 1 Scope and field of application This Internati
15、onal Standard specifies the appropriate terminology for each part of the machine and, with reference to ISO230-1, the geometrical tests for planing machines for two-, three- or four-side dressing; it also gives the corresponding permissible deviations which apply to machines of general purpose use a
16、nd normal accuracy. NOTEIn addition to terms used in two of the three official ISO languages (English and French), this International Standard gives the equivalent terms in German, Spanish and Italian in an Annex; these have been included at the request of Technical Committee ISO/TC39 and are publis
17、hed under the responsibility of the member bodies for Germany, F.R. (DIN), Spain (IRANOR) and Italy (UNI). However, only the terms given in the official languages can be considered as ISO terms. This International Standard deals only with the verification of accuracy of the machine. It does not appl
18、y to testing the running of the machine (vibrations, abnormal noises, stick-slip motion of the components, etc.), nor to its characteristics (speeds, feeds, etc.) which should generally be checked before testing accuracy. This International Standard does not impose any practical test for planing mac
19、hines for two-, three- or four-side dressing. Practical tests should be exceptions and have to be stated in a previous agreement between the manufacturer and the user. This International Standard applies to those machines designated by the numbers12.22, 12.23 and12.24 in ISO7984. 2 References ISO 23
20、0-1, Acceptance code for machine tools Part 1: Geometric accuracy of the machine operating under no load or finishing conditions. ISO 7984, Woodworking machines Technical classification of woodworking and auxiliary machines 1) . 3 Preliminary remarks 3.1 In this International Standard all dimensions
21、 and permissible deviations are expressed in millimetres. 3.2 To apply this International Standard, reference should be made to ISO230-1, especially for installation of the machine before testing, the warming up of the horizontal cutterblocks, vertical spindle and other moving parts, and for a descr
22、iption of measuring methods. The measuring instruments shall not permit errors over1/3 of the tolerances being checked. 3.3 The sequence in which the geometrical tests are given is related to the sub-assemblies of the machine and this in no way defines the practical order of testing. In order to mak
23、e the mounting of instruments or gauging easier, tests may be applied in any order. 3.4 It is not always possible nor necessary to carry out all the tests given in this International Standard. 3.5 It is up to the user to choose, in agreement with the manufacturer, those tests relating to the propert
24、ies which are of interest to him, but these tests shall be clearly stated when ordering a machine. 3.6 A movement is longitudinal when it takes place in the working direction of the piece. 3.7 When establishing the tolerance for a measuring range different from that given in this International Stand
25、ard (see clause2.311 in ISO230-1), it should be taken into consideration that the minimum value of the tolerance is0,01mm. 1) At present at the stage of draft.BS4361-8:1988 2 BSI 12-1999 4 NomenclatureBS4361-8:1988 BSI 12-1999 3 Reference English French Planing machines for two-, three- or four-side
26、 dressing Machines raboter pour le travail sur deux,troisou quatre faces 1 Framework Ossature 1.1 Main frame Bti 2 Feed of workpiece and/or tools Dplacement des pices et/ou outils 2.1 Infeed roller Cylindre damenage 2.2 Outfeed roller Cylindre de sortie 2.3 Feed roller drive chain Chane dentranement
27、 des cylindres damenage 2.4 Variable speed gear Rducteur de vitesse 2.5 Chain tensioner Pignon du tendeur de chane 2.6 Belt drive for bottom spindle Courroie dentranement de larbre infrieur 2.7 Belt drive for top spindle Courroie dentranement de larbre suprieur 2.8 Belt drive for milling cutterblock
28、s Courroie dentranement des arbres porte-fraises 3 Workpiece support clamp and guide Support, maintien et guidage des pices 3.1 Table Table 3.2 Feed roller Rouleau dentranement 3.3 Lateral pressure Presseur latral 3.4 Vertical pressure Presseur vertical 3.5 Transmission for table rise and fall movem
29、ent Chane de transmission du rglage vertical de la table 4 Tool-holders and tools Porte-outils et outils 4.1 Blades Lame 4.2 Cutterblock wedge Coin de blocage de la lame 4.3 Cutterblock planing Broche porte-outils 4.4 Cutterblock milling arbre porte-fraise 5 Workheads and tool drives Unit de travail
30、 et son entranement 5.1 Cutterblock bearing Palier de roulement 6 Controls Commandes 6.1 Master switch Commutateur gnral 6.2 Switches controlling each motor Commutateur de commande de moteur individuel 6.3 Table vertical adjustment control commande de rglage vertical de la table 6.4 Feed speed contr
31、ol Commande du variateur de vitesse 6.5 Drive feed roller control Commande de rouleaux dentranement 6.6 Lateral pressure control Commande du presseur latral 6.7 Vertical pressure control Commande du presseur vertical 7 Safety devices (examples) Dispositifs de scurit (exemples) 7.1 Anti-kick-back fin
32、gers Linguet antirecul 7.2 Emergency stop Bouton darrt durgence 7.3 Belt guard Capot protge-courroieBS4361-8:1988 4 BSI 12-1999 Reference English French Planing machines for two-, three- or four-side dressing Machines raboter pour le travail sur deux,troisou quatre faces 8 Miscellaneous Divers 8.1 H
33、ood Capot 8.2 Access door to control gear Porte daccs aux organes mcaniques 8.3 Dust extraction hood Buse daspiration 8.4 Scale for depth of cut Rgle micromtrique 9 (clause free) (chapitre libre) 10 Examples of work Exemples de travailBS 4361-8:1988 BSI 12-1999 5 5 Acceptance conditions and permissi
34、ble deviations Geometrical tests No. Diagram Object Permissibledeviations Measuring instruments Observations and references in ISO 230-1 test code G1 Checking of flatness ofthe tables: a) longitudinal straightness b) diagonal straightness c) transverse straightness a) and b) 0,20 for A u 1 250 0,30
35、for A 1 250 c) 0,10 for B u 400 0,15 for 400 1 000 Straightedge and feeler gauges Clauses 5.212 and5.322. G2 Checking of longitudinal parallelism of the planes of the twotables 0,20 for A u 1 250 0,30 for A 1 250 Straightedge and feeler gauges Flat to convex. G3 Checking of parallelismof lipsoftable
36、s transversely C = 5 0,10 Dial gauge Clause 5.412.2BS 4361-8:1988 6 BSI 12-1999 No. Diagram Object Permissibledeviations Measuring instruments Observations and references in ISO 230-1 test code G4 Checking of parallelism of the top pressure pad with respect to the maintable 0,10 for B *u 400 0,15 fo
37、r 400 1 000 Straightedge and dial gauge Clause 5.412.4 * B is the width of tables. G5 Checking of parallelism and straightness of the fences 0,10 for D u 400 0,20 for 400 1 000 Straightedge and feeler gauges. G6 Checking of parallelism of the horizontal cutterblocks with respect to the main table, c
38、hecked with the main table in upper and lower positions 0,10 for E u 400 0,20 for E 400 Dial gauge Clause 5.412.4BS 4361-8:1988 BSI 12-1999 7 No. Diagram Object Permissibledeviations Measuring instruments Observations and references in ISO 230-1 test code G7 Measuring of run-out of the horizontal cu
39、tterblocks 0,03 Dial gauge Clause 5.612.2 a) Where the blade setting device is carried from the block shoulders, check on the shoulders. b) Where the blade setting device is carried from the cutterblock, check on the block. G8 Measuring of run-out of the table rollers 0,15 Dial gauge Clause 5.612.2
40、Checked at the ends and centre of each roller. G9 Measuring of run-out of the top of the vertical spindle 0,03 Dial gauge Clause 5.612 Measure at the top of the spindle.BS 4361-8:1988 8 BSI 12-1999 No. Diagram Object Permissibledeviations Measuring instruments Observations and references in ISO 230-
41、1 test code G10 Measuring of camming of the shoulder of the vertical spindle 0,02 Dial gauge Clause 5.632 G11 Checking of squareness of the vertical spindle with respect to the main table 0,05/100 Dial gauge Clause 5.512.42 F W 100 *F is the distance between the shaft axis and the dial gauge.BS4361-
42、8:1988 BSI 12-1999 9 Annex Equivalent terms Reference German Spanish Italian Hobelmaschinen fr zwei-, drei-und vierseitige Bearbeitung Cepilladoras de dos, tres, cuatrocaras Piallatrici su due, tre, quattro lati 1 Stnder Armazn Intelaiatura 1.1 Gestell Bastidor Basamento 2 Vorschub von Werkstck und/
43、oder Werkzeug Desplazamiento de las piezas y/o de los tiles Spostamento dei pezzi e/o degli utensili 2.1 Einzugswalze Rodillo de arrastre Rulli di entrata 2.2 Auszugswalze Rodillo de salida Rulli di uscita 2.3 Antriebskette fr Vorschubwalzen Cadena de transmisin de los rodillos de arrastre Catena di
44、 azionamento dei rulli di avanzamento 2.4 Getriebe Variador de velocidad Variatore di velocit 2.5 Kettenspannrad Pin para tensin de cadena Pignone tendicatena 2.6 Antriebsriemen fr die untere Messerwelle Correa de transmisin del eje inferior Cinghia di trasmissione dellalbero inferiore 2.7 Antriebsr
45、iemen fr die obere Messerwelle Correa de transmisin del eje superior Cinghia di trasmissione dellalbero superiore 2.8 Antriebsriemen fr die Frsspindel Correa de transmisin de los ejes porta-fresas Cinghia di trasmissione dellalbero portafresa 3 Werkstckauflage, -halterung und -fhrung Soporte, sujeci
46、n y gua de las piezas Supporto, fissaggio e guida dei pezzi 3.1 Tisch Mesa Piano 3.2 Rolle Rodillo de alimentacin Rullo di alimentazione 3.3 Seitliche Werkstckfhrung Prensor lateral Pressore laterale 3.4 Vertikale Werkstckfhrung Prensor vertical Pressore verticale 3.5 Kettentrieb zur Hhenverstellung
47、 des Tisches Cadena de transmisin de elevacin de la mesa Catena di trasmissione per regolazione verticale 4 Werkzeugtrger und Werkzeug Porta-til y tiles Portautensili ed utensili 4.1 Hobelmesser Cuchillas Coltelli 4.2 Messerkeilleiste Chaveta de blocaje de las cuchillas Lardoni conici di bloccaggio
48、dei coltelli 4.3 Hobelmesserwelle Mango porta-cuchillas Albero portacoltelli 4.4 Frsspindel Mango porta-fresa Albero portafresa 5 Einbauteile und Teile fr den Werkzeugantrieb Unidad de trabajo y su transmisin Unit operatrice e suo azionamento 5.1 Hobelmesserwellenlager Soporte del rodamiento Support
49、o dei cuscinetti 6 Bedienungs- und berwachungsorgane Mandos Comandi 6.1 Hauptschalter Conmutador general Interruttore generale 6.2 Schalter fr die Einzelmotoren Conmutador de control del motor individual Interruttori di comando dei singoli motori comando 6.3 Tischhhenverstellung Mando de elevacin de la mesa Comando regolazione verticale della tavola 6.4 Verstellung der Vorschubgeschwindigkeit Mando del variador de velocidad Comando regolazione variatore di
