1、BRITISH STANDARD AEROSPACE SERIES BS5L36:1985 (Superseding BS4L36) Specification for Wire for solid, cold-forged rivets of99.5% aluminium (Not exceeding10mm diameter) UDC 629.7:669.71-426:621.884BS5L36:1985 This BritishStandard, having been prepared under the directionof the Aerospace Standards Comm
2、ittee, was published under the authority ofthe Board of BSI and comesintoeffect on 31December1985 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference ACE/24 Draft for comment81/77624DC ISBN 0 580 14826 2 Committees responsible for this BritishStandard The
3、 preparation of this BritishStandard was entrusted by the Aerospace Standards Committee (ACE/-) to Technical Committee ACE/24 upon which the following bodies were represented: Aluminium Federation Aluminium Stockholders Association Association of Light Alloy Refiners Limited BNF Metals Technology Ce
4、ntre British Forging Industry Association British Industrial Fasteners Federation British Investment Casting Trade Association Institute of British Foundrymen Light Metal Founders Association Magnesium Industry Council Ministry of Defence Society of British Aerospace Companies Limited Amendments iss
5、ued since publication Amd. No. Date of issue CommentsBS5L36:1985 BSI 02-2000 i Contents Page Committees responsible Inside front cover 1 Inspection and testing procedure 1 2 Quality of material 1 3 Chemical composition 1 4 Condition 1 5 Heat treatment 1 6 Mechanical properties 1 7 Identification col
6、our 1 Publication referred to Inside back coverBS5L36:1985 ii BSI 02-2000 NOTE 1The chemical composition of this material complies with that registered as International Designation1050A. NOTE 2The title of the publication referred to in this standard is listed on the inside back cover. A British Sta
7、ndard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover
8、, an inside front cover, pagesi andii, pages1 and2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS5L36:1985 BSI 02-2000 1 1 Inspection and
9、testing procedure This BritishStandard shall be used in conjunction with the relevant sections of the latest issue of BSL100. 2 Quality of material The material shall be made from aluminium of the chemical composition specified in clause3, with or without approved scrap at the discretion of the manu
10、facturer. 3 Chemical composition The chemical composition of the material shall be: 4 Condition The wire shall be supplied as drawn. 5 Heat treatment None. 6 Mechanical properties 6.1 Tensile test. The tensile strength of test pieces, selected and prepared in accordance with the relevant requirement
11、s of BS L100, shall be not less than110MPa. 6.2 Torsion test. The torsion test shall be carried out on a sample in the condition as delivered. 7 Identification colour The identification colour for the wire shall be black. Element % min. max. Silicon Iron Copper Manganese Magnesium Zinc Titanium Othe
12、rs: each Aluminium a 99.50 0.25 0.40 0.05 0.05 0.05 0.07 0.05 0.03 a The aluminium content is the difference between100.00% and the sum of all the other metallic elements present in amounts of0.01% or more each, expressed to the second decimal place before determining the sum.2 blankBS5L36:1985 BSI
13、02-2000 Publication referred to BS L100, Procedure for inspection and testing of wrought aluminium and aluminium alloys. BS5L36:1985 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents th
14、e UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to impr
15、ove the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089
16、967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001
17、. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and inter
18、national standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kep
19、t up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyrig
20、ht, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise
21、 without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
