1、BRITISH STANDARD BS6318-3: 1982 ISO5051:1981 Bucket elevators Part3: Specification for dimensions of deep elevator bucket with flat rear wall ISO title: Continuous mechanical handling equipment Deep elevator bucket with flat rear wall Main dimensions UDC 621.867.3BS6318-3:1982 This BritishStandard,
2、having been prepared under the directionof the Mechanical Engineering Standards Committee, was published underthe authority of the BoardofBSI and comesintoeffecton 29October1982 BSI12-1999 The following BSI references relate to the work on this standard: Committee reference MEE/128 Draft for comment
3、80/75147 DC ISBN 0 580 13025 8 Cooperating organizations The Mechanical Engineering Standards Committee, under whose direction this BritishStandard was prepared, consists of representatives from the following: Associated Offices Technical Committee* Department of Trade (Marine Division) Association
4、of Consulting Engineers* Department of Transport Association of Hydraulic Equipment Electricity Supply Industry in England and Manufacturers Wales Association of Mining Electrical and Energy Industries Council Mechanical Engineers Engineering Equipment Users Association* British Compressed Air Socie
5、ty Federation of Manufacturers of Construction British Constructional Steelwork Association Equipment and Cranes British Electrical and Allied Manufacturers Health and Safety Executive* Association (BEAMA) Institution of Gas Engineers British Gas Corporation Institution of Mechanical Engineers* Brit
6、ish Gear Manufacturers Association Institution of Plant Engineers British Internal Combustion Engine Institution of Production Engineers* Manufacturers Association Lloyds Register of Shipping British Pump Manufacturers Association London Transport Executive British Steel Corporation Machine Tool Ind
7、ustry Research Association British Steel Industry Ministry of Defence British Valve Manufacturers Association Ltd National Coal Board* Chartered Institution of Building Services Oil Companies Materials Association Crown Agents for Oversea Governments and Process Plant Association Administrations Soc
8、iety of Motor Manufacturers and Traders Department of Industry (Mechanical Limited Engineering) Telecommunication Engineering attention is drawn especially to the following. The comma has been used throughout as a decimal marker. In BritishStandards it is current practice to use a full point on the
9、baseline as the decimal marker. Wherever the words “International Standard” appear, referring to this standard, they should be read as “BritishStandard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their co
10、rrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard Corresponding BritishStandard ISO2148:1974 BS3810 Glossary of terms used in materials handling Part2:1965 Terms used in connection with conveyors an
11、d elevators (excluding pneumatic and hydraulic handling) (Technically equivalent) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had ame
12、ndments incorporated. This will be indicated in the amendment table on the inside front cover.BS6318-3:1982 BSI 12-1999 1 1 Scope and field of application This International Standard specifies the main dimensions of deep elevators buckets with flat rear wall. 2 Reference ISO2148, Continuous mechanic
13、al handling equipment Nomenclature. 3 Main dimensions Dimensions in millimetres Projection a 160 200 224 250 280 315 355 400 Bucket width b 160 200 250 315 400 500 630 800 1000 1250 Total height h 1 200 250 280 315 355 400 450 500 Height h 2 106 132 150 170 190 212 236 265 Radius r 50 63 71 80 90 10
14、0 112 125 Bucket nominal capacity a V 1,9 2,4 4,7 6,0 9,5 15,0 23,6 37,5 58 92 a V =water contents, expressed in litres, with rear wall in the vertical position.2 blankBS6318-3:1982 BSI 12-1999 Publication referred to See national foreword.BS6318-3: 1982 ISO5051:1981 BSI 389 Chiswick High Road Londo
15、n W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision
16、. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Sec
17、retary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying s
18、tandards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishS
19、tandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details
20、 on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Member
21、ship Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may
22、be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, an
23、d size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
