1、BRITISH STANDARD BS 6356-2: 1985 ISO 8169: 1984 Spraying equipment for crop protection Part 2: Specification for connecting dimensions for nozzles and manometers ISO title: Equipment for crop protection Sprayers Connecting dimensions for nozzles and manometers UDC 631.348.45:632.982.1BS 6356-2:1985
2、This British Standard, having been prepared under the directionof the Agricultural Machinery and Implements Standards Committee, was published under the authority ofthe Board of BSI and comesintoeffect on 31December1985 BSI 08-1999 The following BSI references relate to the work on this standard: Co
3、mmittee reference AGE/15 Draft for comment 83/73962 DC ISBN 0 580 14687 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Agricultural Machinery and Implements Standards Committee (AGE/-) to Technical Committee AGE/15, upon which the fol
4、lowing bodies were represented: Agricultural and Allied Workers National Trade Group Agricultural Engineers Association British Agrochemicals Association Health and Safety Executive Imperial College of Science and Technology Ministry of Agriculture, Fisheries and Food National Farmers Union National
5、 Institute of Agricultural Engineering Royal Horticultural Society Amendments issued since publication Amd. No. Date of issue CommentsBS6356-2:1985 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 References 1 3 Main conn
6、ecting dimensions for nozzles 1 4 Main connecting dimensions for manometers 2 Figure 1 Connecting dimensions for nozzles 1 Figure 2 Example of mounting 2 Figure 3 Dimensions of manometer connections (see Table) 2 Figure 4 Example of mounting 3 Table Dimensions for built-in nut 3 Publications referre
7、d to Inside back coverBS 6356-2:1985 ii BSI 08-1999 National foreword This British Standard has been prepared under the direction of the AgriculturalMachinery and Implements Standards Committee and is identical with ISO 8169:1984 “Equipment for crop protection Sprayers Connecting dimensions for nozz
8、les and manometers” published by the International Organization for Standardization (ISO). Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not ident
9、ical with those used in British Standards; attention is drawn especially to the following. The comma has been used as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “International Standard” appear, referring
10、 to this standard, they should be read as “British Standard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fro
11、m legal obligations. Cross-references International Standards Corresponding British Standards ISO 4102:1984 BS 6356 Spraying equipment for crop protection Part 3:1985 Specification for dimensions of connection threading (Identical) ISO 5681:1981 BS 6355:1983 Glossary of terms for equipment for crop
12、protection (Identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment
13、 table on the inside front cover.BS6356-2:1985 BSI 08-1999 1 1 Scope and field of application This International Standard lays down the main connecting dimensions to allow interchangeability of nozzles and manometers. (Terms are defined inISO5681.) This International Standard applies to sprayers for
14、 crop protection. Connecting dimensions for nozzles apply only to apparatus which is equipped with connections for nozzle tips with filters and/or anti-drip filters. 2 References ISO 4102, Equipment for crop protection Sprayers Connection threading. ISO 5681, Equipment for crop protection Vocabulary
15、. 3 Main connecting dimensions for nozzles Figure 1 Connecting dimensions for nozzlesBS 6356-2:1985 2 BSI 08-1999 4 Main connecting dimensions for manometers Figure 2 Example of mounting Figure 3 Dimensions of manometer connections (see Table)BS6356-2:1985 BSI 08-1999 3 Table Dimensions for built-in
16、 nut Dimensions in millimetres Thread a d 1 b d 4 t 1 t 2 min. min. min. M12 1,5 6,5 5 10 15 R1/4(in) 6,5 5 10 15 a See ISO 4102. Figure 4 Example of mounting2 + 04 blankBS6356-2:1985 BSI 08-1999 Publications referred to See national forewordBS 6356-2: 1985 ISO 8169: 1984 BSI 389 Chiswick High Road
17、London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or rev
18、ision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform th
19、e Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buy
20、ing standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Bri
21、tishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give de
22、tails on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact M
23、embership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract
24、may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols
25、, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
