1、BRITISH STANDARD BS 7947:1997 IEC 1602:1996 Connectors used in the field of audio, video and audiovisual engineering ICS 31.220.10; 33.160.50BS7947:1997 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Stan
2、dards Board and comes into effect on 15February1997 BSI 11-1998 The following BSI references relate to the work on this standard: Committee reference EPL/100/3 Draft for comment 94/208717 DC ISBN 0 580 26926 4 Committees responsible for this British Standard The preparation of this British Standard
3、was entrusted by Technical Committee EPL/100, Sound, vision and multimedia systems and equipment, to Subcommittee EPL/100/3, Equipment and systems in the field of audio, video and audiovisual engineering, upon which the following bodies were represented: Association of British Theatre Technicians Au
4、dio Engineering Society British Broadcasting Corporation British Educational Suppliers Association British Federation of Audio British Radio and Electronic Equipment Manufacturers Association British Telecommunications plc Federation of the Electronics Industry Independent Television Association (IT
5、VA) Institute of Sound and Communication Engineers Institution of Electrical Engineers International Association of Broadcasting Manufacturers Professional Lighting and Sound Association Royal Institute of British Architects Royal National Institute for Deaf People Society of Cable Television Engine
6、ers Amendments issued since publication Amd. No. Date CommentsBS7947:1997 BSI 11-1998 i Contents Page Committees responsible Inside front cover National foreword ii 1 General 1 1.1 Scope and object 1 1.2 Reference documents 1 2 Main index 2 3 Popular name index 3 4 Standard sheets 5 List of referenc
7、es Inside back coverBS7947:1997 ii BSI 11-1998 National foreword This British Standard has been prepared by Subcommittee EPL/100/3 and is identical with IEC1602:1996 Connectors used in the field of audio, video and audiovisual engineering, published by the International Electrotechnical Committee (I
8、EC). For ease of reproduction some of the French version of the text has been retained. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of
9、itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard BS 3041 Radio frequency connectors IEC 169-2:1965 Part 2:1977 Specification for coaxial unmatched connector (Identical) IEC 169-12:1979 Part 12:1981 Specification for r.f. coaxial c
10、onnectors with screw coupling, unmatched (type UHF) (Identical) IEC 169-24:1991 BS EN 60169 Radio-frequency connectors BS EN 60169-24:1994 Radio-frequency coaxial connectors with screw coupling, typically for use in 75ohm cable distribution systems (Type F) (Identical) IEC 268-11:1987 BS 6840 Sound
11、system equipment Part 11:1987 Specification for application of connectors for the interconnection of sound system components (Identical) IEC 268-12:1987 BS EN 60268 Sound system equipment BS EN 60268-12:1995 Application of connectors for broadcast and similar use (Identical) BS 5817 Specification fo
12、r audiovisual, video and television equipment and systems IEC 574-3:1983 Part 3:1989 Specification for connectors for the interconnection of equipment in audiovisual systems (Identical) IEC 574-18:1987 Part 18:1989 Specification for connectors for automatic slide projectors with built-in triacs for
13、audiovisual application (Identical) IEC 933-4:1994 BS EN 60933 Audio, video and audiovisual systems. Interconnection and matching values BS EN 60933-4:1994 Connector and cordset for domestic digital bus (D2B) (Identical) Summary of pages This document comprises a front cover, an inside front cover,
14、pages i and ii, pages1 to26, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.BS7947:1997 BSI 11-1998 1 1 General 1.1 Scope and object This techn
15、ical report gives guidance on the identification and application of connectors in the field of audio, video and audiovisual engineering. It is intended to be used in conjunction with application standards, such as IEC268-11, and definitive electrical and mechanical performance standards, such as IEC
16、130, where these exist. Standards for the electrical and mechanical characteristics of connectors used in the field of audio, video and audiovisual engineering are published on a regular basis. For historical reasons, the applications of some of these connectors are now ahead of the issue of the cor
17、responding definitive standards. This causes difficulties in clearly identifying connectors for reference purposes in application standards such as IEC268-11. In order to overcome these difficulties, this technical report is prepared in order to provide the identification needed for applications sta
18、ndards, comprising the following information: A main index giving information on applications: The main index serves the dual purpose of providing a quick reference overview of all connectors mentioned in this report, as well as a table of contents of the standard sheets. A popular name index: The p
19、opular name index provides easy identification through the popular names by which these connectors are commonly identified. A series of standard sheets: Each connector or connector family is identified on standard sheets. Each standard sheet provides the following information: brief functional descr
20、iption; basic dimensions; typical electrical specification; reference to IEC Standards. The basic dimensions and typical electrical specifications are provided to allow positive identification only, and the diagrams are not meant to represent the construction of the component 1.2 Reference documents
21、 Full specifications are given in the following IEC standards which are referred to. IEC 130-9, 1989: Connectors for frequenciesbelow3MHz Part 9: Circular connectors for radio and associated sound equipment. IEC 169-2, 1965: Radiofrequency connectors Part2: Coaxial unmatched-connector. IEC 169-8, 19
22、78: Radio-frequency connectors Part8: R.F. coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock Characteristic impedance 50 ohms (TypeBNC). IEC 169-12, 1979: Radio-frequency connectors Part 12: R.F. coaxial connectors with screw coupling, unmatched (Type UHF)
23、. IEC 169-24, 1991: Radio-frequency connectors Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F). IEC 268-11, 1987: Sound system equipment Part11: Application of connectors for the interconnection of sound system componen
24、ts. IEC 268-12, 1987: Sound system equipment Part12: Application of connectors for broadcast and similar use. IEC 574-3, 1983: Audiovisual, video and television equipment and systems Part 3: Connectors for the interconnection of equipment in audiovisual systems. IEC 574-18, 1987: Audiovisual, video
25、and television equipment and systems Part 18: Connectors for automatic slide projectors with built-in triacs for audiovisual application. IEC 603-11, 1992: Connectors for frequencies below3MHz for use with printed boards Part11:Detail specification for concentric connectors (dimensions for free conn
26、ectors and fixedconnectors). IEC 807-9, 1993: Rectangular connectors for frequencies below 3MHz Part 9: Detail specification for a range of peritelevision connectors. IEC 933-1,1988: Audio, video and audiovisual systems Interconnections and matching values Part 1: 21-pin connector for video systems
27、Application No 1. IEC 933-2, 1991: Audio, video and audiovisual systems Interconnections and matching values Part 2: 21-pin connector for video systems Application No 2. IEC 933-4, 1994: Audio, video and audiovisual systems Interconnections and matching values Part 4: Connector and cordset for domes
28、tic digital bus (D2B). IEC 1076-4-105, 1995: Connectors with assessed quality for use in d.c, low-frequency analogue and in digital high-speed data applications Part4:Printed board connectors Section105:Detail specification for 9mm circular connector with 3 to 8 contacts for use in a wide range of a
29、pplications including the telecommunication and audio industry.BS 7947:1997 2 BSI 11-1998 2 Main Index Description of connector Applications Electrical and mechanical standard Application standard Manufacturers Notes Catalogue standard sheet no. General Specific Coaxial, unmatched General General IE
30、C 169-2 IEC 574-3 Worldwide 01 Coaxial, 75W (F connector) RF IEC 169-24 None Worldwide 02 Coaxial, 50W (BNC connector) RF IEC 169-8 None Worldwide 03 Coaxial type UHF) RF/UHF IEC 169-12 None Worldwide 04 Circular, 3-8 contacts Audio General IEC 130-9 IEC 268-11 Worldwide “DIN” 05 IEC 574-3 Concentri
31、c, 3,2 mm A/V/RF General None IEC 268-11 Worldwide “Phono” 06 IEC 574-3 Concentric 2,5, 3,5, 6,3mm Audio Various IEC 603-11 IEC 268-11 IEC 574-3 Worldwide Household type jacks 07-11 Concentric, 6,4mm B-gauge Audio General None IEC 268-12 UK, USA Broadcasting type jacks 12 Concentric, 4,4 mm Bantam A
32、udio General None IEC 268-12 UK, USA Broadcasting type jacks 13 Circular broadcasting and similar Audio General None IEC 268-12 Worldwide “AXR”, “XLR” 3 and 5 contact 14 Circular, high voltage and current Audio Amplifiers, loudspeakers None None Switzerland 15 16 Circular, 10 contacts Video Camera,
33、VCR None None Japan Worldwide use 17 Rectangular, 21 contacts AV General IEC 807-9 IEC 933-1 Europe, Japan Peritelevision 18 IEC 933-2 Rectangular, 3 contacts D2B General None IEC 933-4 Worldwide 19 Circular, 3-8 contacts Video Y-C IEC 1076-4-105 IEC 933-5 Worldwide 9 mm diameter shell “mini-DIN” 20
34、 Circular, 8 contacts 262 degrees AV Remote control None IEC 574-18 Germany, Japan DIN-type but special 21 Circular, 2 contacts AV Amplifiers, loudspeakers None IEC268-11 Worldwide 1 pin, 22 IEC574-3 1 flat bladeBS 7947:1997 BSI 11-1998 3 3 Rpertoire populaire/Popular name index N de feuille descrip
35、tive Etats-Unis/USA Grande-Bretagne/UK Japon/Japan France Allemagne/Germany Rpublique Tchque Czech Republic Catalogue sheet No. 01 “Belling” connector Coaxial 75 W IEC aerial plug 02 F connector, or F-59 F connector Coaxial 75 W F F connector 03 BNC BNC connector BNC connector Connecteur BNC BNC BNC
36、 connector 04 UHF UHF connector UHF UHF connector 05 DIN plug DIN audio connectors DIN connector Connecteur DIN DIN DIN connector 06 RCA plug and jack Phono connector Pin connector (pin plug and jack) Connecteur Cinch Cinch Cinch connector 07 Micro plug and jack 2,5 mm 2 contact jack and plug Mini-M
37、ini plug and jack Prise jack mono 2,5 Klinkenstecker 2,5 mono 2,5 mm jack 08 Mini phone 3,5 mm 2 contact jack and plug Mini plug and jack Prise jack mono 3,5 Klinkenstecker 3,5 mono 3,5 mm jack 09 Stereo mini phone 3,5 mm 3 contact jack and plug Stereo mini plug and jack Prise jack stro 3,5 Klinkens
38、tecker 3,5 stereo 3,5 mm stereo jack 10 Phone plug and jack 6,3 mm consumer type 2 contact jack and plug Q plug and jack Prise jack mono 6,35 6,3 mm Kopfhrerstecker 6,3 mm jack 11 Stereo phone plug and jack 6,3 mm consumer type 3 contact jack and plug Stereo Q plug and jack Prise jack stro 6,35 Kopf
39、hrerstecker Stereo 6,3 mm stereo jack 12 1/4” TRS (tip, ring, sleeve) patch bay plug and jack 6,4 mm B-gauge jack and plug Prise jack stro 6,4 Telephon Klinke 13 Tiny-T TRS patch bay plug and jack Bantam jack and plug Prise jack stro 4,4 14 XLR XLR connector Cannon connector XLR XLR XLR connector 15
40、 Neutrik Neutrik NL4 connector 16 Neutrik NL8 connectorBS 7947:1997 4 BSI 11-1998 Rpertoire populaire/Popular name index N de feuille descriptive Etats-Unis/USA Grande-Bretagne/UK Japon/Japan France Allemagne/Germany Rpublique Tchque/ Czech Republic Catalogue sheet No. 17 10 contact video connector
41、Camera connector Prise video 10 contacts 10 contact video connector 18 SCART connector 21 pin connector Prise SCART (see/voir note 1) Pritlvision (see/voir note 2) SCART/Peri SCART connector 19 D2B connector D2B connector 20 Mini-DIN plug and jack Mini-DIN plug and jack 21 Harshmann type 8 pin conne
42、ctor 22 DIN speaker plug and jack DIN loudspeaker connector Connecteur HP DIN DIN loudspeaker connector Loudspeaker connector NOTE 1SCART = Syndicat des constructeurs dappareils Radio et Tlvision (now SIMAVELEC). NOTE 2Les noms de “prise Pritel” ou de “systmes Pritel” ne sont pas autoriss car “Prite
43、l” est une marque dpose. The names “prise Pritel” or “systmes Pritel” are not allowed because Pritel is a registered trade mark.BS7947:1997 BSI 11-1998 5 4 Standard sheets/Feuilles descriptives IEC CEI STANDARD SHEET FEUILLE DESCRIPTIVE 01 BRIEF DESCRIPTION Radio-frequency connectors. Coaxial unmatc
44、hed connector for television aerial (nominally 75 W) DESCRIPTION SOMMAIRE Connecteurs frquence radiolectrique. Connecteur coaxial non adapt dantenne de tlvision (nominal 75 W) BASIC DIMENSIONS (see note) DIMENSIONS DE BASE (voir note) TYPICAL ELECTRICAL SPECIFICATION (see note) SPCIFICATIONS LECTRIQ
45、UES TYPIQUES (voir note) Maximum d.c. or peak a.c. voltage between contacts: Tension continue ou alternative crte maximale entre les contacts: not standardized pas standardise Maximum d.c. or peak a.c. voltage between contacts and shell: Tension continue ou alternative crte maximale entre les contac
46、ts et lenveloppe: not standardized pas standardise Maximum current: Courant maximal: not standardized pas standardise Typical contact resistance: Rsistance de contact typique: inner contact/contact interne: outer contact/contact externe: 10 mW 5 mW Typical insulation resistance: Rsistance disolement
47、 typique: 1 GW IEC standard giving full electrical and mechanical specifications: Norme CEI donnant les spcifications mcaniques et lectriques: IEC/CEI 169-2 IEC application standards: Normes CEI dapplication: IEC/CEI 574-3 NOTEFor identification only. See manufacturers data for further information.
48、Seulement pour identification. Voir donnes des fabricants pour de plus amples informations.BS7947:1997 6 BSI 11-1998 IEC CEI STANDARD SHEET FEUILLE DESCRIPTIVE 02 BRIEF DESCRIPTION R.F. coaxial connnector. Characteristic impedance 75 W (F connector). DESCRIPTION SOMMAIRE Connecteur coaxial frquence
49、radiolectrique. Impdance caractristique 75 W (connecteur F). BASIC DIMENSIONS (see note) DIMENSIONS DE BASE (voir note) TYPICAL ELECTRICAL SPECIFICATION (see note) SPCIFICATIONS LECTRIQUES TYPIQUES (voir note) Maximum d.c. or peak a.c. voltage between contacts: Tension continue ou alternative crte maximale entre les contacts: V Maximum d.c. or peak a.c. voltage between contacts and shell: Tension continue ou alternative crte maximale entre les contacts e
