1、BS 8450:2006Code of practice for installation of electrical and electronic equipment in shipsICS 47.020.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDLicensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSIPublishing and copyrigh
2、t informationPublished jointly by British Standards Institution and The Institution of Engineering and Technology, UK.The BSI/ Institution of Engineering and Technology copyright notice displayed in this document indicates when the document was last issued. BSI/ Institution of Engineering and Techno
3、logy 2006ISBN 0 580 48280 4The following BSI references relate to the work on this standard:Committee reference JPEL/18Draft for comment 05/30138424 CDOther publications available from the Institution of Engineering and Technology:The Institution of Engineering and Technology produces other publicat
4、ions which may be of interest. Please contact the Institution for further details:Michael Faraday House, Six Hills Way, Stevenage SG1 2AY, United Kingdom. Tel: + 44 (0) 1438 767328, Fax: + 44 (0) 1438 767375, Email: salestheiet.org, Web: www.theiet.org.Publication historyFirst published, July 2006Am
5、endments issued since publicationAmd. no. Date Text affectedBS 8450:2006Licensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSI BSI July 2006 iBS 8450:2006ContentsForeword ii1 Scope 12 Normative references 13 Terms and definitions 54 General requirements 75 Earthing and
6、 bonding 106 Application of diversity factors 137 Distribution 158 Generating plant and motors 189 Construction of cables 2210 Selection and installation of cables 2411 Tables of cable current ratings 2712 Motor control gear 2813 Batteries 3014 Heating and cooking appliances 3315 Semiconductor conve
7、rters for power purposes 3416 Transformers 3517 Accessories 3618 Communication and navigation aids 3719 Control and instrumentation 3820 Lightning protection 4021 Systems operating at above 1 kV a.c. 4022 Dynamic positioning (DP) 41AnnexesAnnex A (informative) Guidance on the selection and use of so
8、cket-out-lets and welding equipment 43Annex B (informative) Guidance on the treatment of the neutral point 46Annex C (informative) Guidance on electromagnetic compatibility 56Bibliography 58List of figuresFigure 1 Assessment curves 14List of tablesTable 1 Supply conditions for which supplementary bo
9、nding is not required 12Table 2 Creepage and clearance distances 41Table B.1 Summary of principal features of the neutral earthing methods 46Summary of pagesThis document comprises a front cover, an inside front cover, pages i and iv, pages 1 to 61, an inside back cover and a back cover.Licensed Cop
10、y: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSIii BSI July 2006BS 8450:2006ForewordPublishing and supersession informationThis British Standard was published by BSI and came into effect on 26 July 2006. It was prepared by Technical Committee JPEL/18, Electrical installation
11、s of ships. It supersedes all editions of the “Regulations for the Electrical and Electronic Equipment of Ships” (the IEE “Blue Book”), which are withdrawn. Copyright is held jointly between BSI and Institution of Engineering and Technology.JPEL/18 wishes to acknowledge the participation of the foll
12、owing organizations in the drafting of this code of practice.British Electrotechnical and Allied Manufacturers Association (BEAMA)British Cables Association (BCA)British Marine Equipment Association (BMEA)British Rig Owners Association (BROA)British Waterways BoardElectrical Contractors Association
13、(ECA)Engineering Equipment and Materials Users Association (EEMUA)Association for the Instrumentation, Control and Automation Industry in the UK (GAMBICA) Health and Safety Executive (HSE)Institute of Marine Engineering, Science and Technology (IMar EST)Institution of Engineering and Technology (IET
14、)Institution of Engineers and Shipbuilders in ScotlandInstitution of Incorporated Engineers (IIE)International Marine Contractors Association (IMCA)Lloyds RegisterMaritime and Coastguard Agency (MCGA)MOD UK Defence StandardizationSELECTUK Offshore Operators Association (UKOOA)The production of this
15、British Standard has required careful comparison of the text of the “Blue Book” with the relevant IEC standards. This British Standard indicates only additional requirements or recommendations for UK industry that (BS) IEC 60092 lacks entirely or, in the opinion of JPEL/18, does not cover adequately
16、, although frequent reference is made to other relevant standards and publications. References to the applicable parts of (BS) IEC 60092 are given at the beginning of each clause.Licensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSI BSI July 2006 iiiBS 8450:2006Use of
17、 this documentAs a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification, and particular care should be taken to ensure that claims of compliance are not misleading.DisclaimerWhile the publisher and contributors
18、believe that the information and guidance given in this work is correct, all parties must rely on their own skill and judgement when making use of it. Neither the publisher nor any contributor assume any liability to anyone for any loss or damage caused by any error or omission in the work, whether
19、such error or omission is the result of negligence or any other cause. All and any such liability is disclaimed.Contractual and legal considerationsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance w
20、ith a British Standard cannot confer immunity from legal obligations. In particular, attention is drawn to the statutory regulations listed as items 1 to 22 in the bibliography.Licensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSIThis page deliberately left blankBS 84
21、50:2006Licensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSI BSI July 2006 1BS 8450:20061 ScopeThis British Standard gives recommendations for the design, installation and maintenance of electrical equipment for the generation, storage, conversion, distribution and ut
22、ilization of electrical energy for all purposes in ships of all descriptions, including, where relevant, inland and harbour craft, but excluding ships of war. NOTE For vessels smaller than 500 grt or with a length less than 50 m, IEC 60092-507 provides a basic standard for small vessel electrical in
23、stallations, including direct current systems not exceeding 50 V and alternating current systems not exceeding 250 V single phase or 500 V three phase.These recommendations are intended to provide satisfactory operation and safety, especially from fire and electrical shock, of installed equipment an
24、d portable and transportable equipment which is intended to be connected to the ships electrical distribution system. They relate principally to requirements for the installation, utilization, inspection and testing, but certain recommendations for the construction of electrical and electronic equip
25、ment are included.This British Standard is not applicable to the internal wiring of manufactured apparatus that is not wired on board. It is not intended to provide for every circumstance those of a special character may require appropriate advice.2 Normative referencesThe following referenced docum
26、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. BS 21, Specification for pipe threads for tubes and fittings where pressure-tig
27、ht joints are made on the threads (metric dimensions).BS 196, Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts.BS 1363 (all parts), 13 A plugs, socket-outlets and adaptors
28、.BS 1387, Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads.BS 1597, Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installati
29、ons.BS 3135, Specification for gas turbine acceptance test.BS 3456 (all parts), Specification for safety of household and similar electrical appliances.BS 3863 (all parts), Guide for gas turbines procurement.BS 4167 (all parts), Specification for electrically-heated catering equipment.BS 4568-1, Spe
30、cification for steel conduit and fittings with metric threads of ISO form for electrical installations Part 1: Steel conduit, bends and couplers.Licensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSI2 BSI July 2006BS 8450:2006BS 4999 (all parts), General requirements f
31、or rotating electrical machines.BS 5308-1, Instrumentation cables Part 1: Specification for polyethylene insulated cables.BS 5308-2, Instrumentation cables Part 2: Specification for PVC insulated cables.BS 5467, Electric cables Thermosetting insulated, armoured cables for voltages of 600/1000 V and
32、1900/3300 V.BS 5514 (all parts), Reciprocating internal combustion engines: performance.BS 6004, Electric cables PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring.BS 6231, Specification for PVC-insulated cables for switchg
33、ear and controlgear wiring.BS 6290-4, Lead-acid stationary cells and batteries Part 4: Specification for classifying valve regulated types.BS 6346, Electric cables PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V.BS 6351-1, Electric surface heating Part 1: Specification for
34、electric surface heating devices.BS 6351-2:1983, Electric surface heating Part 2: Guide to the design of electric surface heating systems.BS 6351-3, Electric surface heating Part 3: Code of practice for the installation, testing and maintenance of electric surface heating systems.BS 6500, Electric c
35、ables Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments.BS 6622, Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV
36、.BS 6626, Code of practice for maintenance of electrical switchgear and control gear for voltages above l kV and up to and including 36 kV.BS 6724, Electric cables Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases wh
37、en affected by fire.BS 6883, Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units Requirements and test methods.BS 7027, Specification for limits and methods of measurement of the immunity of marine electrical and electronic equipment to conducted and radiated
38、electromagnetic interference.BS 7211, Electric cables Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire.Licensed Copy: Wang Bin, na, Wed
39、 Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSI BSI July 2006 3BS 8450:2006BS 7629 (all parts), Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire.BS 7655-2 (all parts), Specification for insulating and sheathing ma
40、terials for cables Part 2: Cross-linked elastomeric sheathing compounds.BS 7671, Requirements for electrical installations IEE Wiring Regulations.BS 7846, Electric cables 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affe
41、cted by fire.BS 7889, Electric cables Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V.BS 7917, Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units Requirements and test methods.BS 7919, Electric
42、 cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments.BS EN 50085-1, Cable trunking systems and cable ducting systems for electrical installations General requirements.BS EN 50086-1, Specification for conduit systems fo
43、r cable management Part 1: General requirements.BS EN 50086-2 (all parts), Specification for conduit systems for cable management Part 2: Particular requirements.BS EN 50117 (all parts), Coaxial cables.BS EN 60034-15, Rotating electrical machines Part 15: Impulse voltage withstand levels of rotating
44、 a.c. machines with form-wound stator coils.BS EN 60045-1, Guide to steam turbine procurement Part 1: Guide to steam turbine procurement.BS EN 60079-10, Electrical apparatus for explosive gas atmospheres Part 10: Classification of hazardous areas.BS EN 60079-14, Electrical apparatus for explosive ga
45、s atmospheres Part 14: Electrical installations in hazardous areas (other than mines).BS EN 60228, Conductors of insulated cables.BS EN 60298, A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV.BS EN 60309-2, Plugs, socket-outlets and couplers
46、for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories.BS EN 60335 (all parts), Specification for safety of household and similar electrical appliances.BS EN 60335-2-36, Specification for safety of household and similar electrical appliances
47、Part 2-36 Particular requirements Licensed Copy: Wang Bin, na, Wed Sep 13 03:19:07 BST 2006, Uncontrolled Copy, (c) BSI4 BSI July 2006BS 8450:2006Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements.BS EN 60335-2-37, Specification for safety of household and s
48、imilar electrical appliances Part 2-37 Particular requirements Particular requirements for commercial electric deep fat fryers.BS EN 60335-2-38, Specification for safety of household and similar electrical appliances Part 2-38 Particular requirements Particular requirements for commercial griddles a
49、nd griddle grills.BS EN 60335-2-39, Specification for safety of household and similar electrical appliances Part 2-39 Particular requirements Particular requirements for commercial multi-purpose cooking pans.BS EN 60439 (all parts), Specification for low-voltage switchgear and controlgear assemblies.BS EN 60622, Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-cadmium prismatic rechargeable single cells.BS EN 60470, High-voltage alternating
