1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 1867 : 1997 The Eur
2、opean Standard EN 1867 : 1997 has the status of a British Standard ICS 35.240.15 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Machine readable cards Health care applications Numbering system and registration procedure for issuer identifiersThis British Standard, having been
3、 prepared under the direction of the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 December 1997 BSI 1997 ISBN 0 580 28698 3 BS EN 1867 : 1997 Amendments issued since publication Amd. No. Date Text affected National foreword This British Standard is
4、 the English language version of EN 1867 : 1997. The UK participation in its preparation was entrusted to Technical Committee IST/17, Identification cards and related devices, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enq
5、uiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The Br
6、itish Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index, or by using the Find facility of the BSI Standards Electronic Catalogue. Compliance
7、 with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover.CEN European Committee for Standardization Comite Europe en de No
8、rmalisation Europa isches Komitee fu r Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1867 : 1997 E EUROPEAN STANDARD EN 1867 NORME EUROPE ENNE EUROPA ISCHE NOR
9、M August 1997 ICS 35.240.15 Descriptors: Data processing, information interchange, identification cards, diseases, characteristics, numbering, data recording, organization for code assignment English version Machine readable cards Health care applications Numbering system and registration procedure
10、for issuer identifiers Cartes lisibles par machine Applications pour la sante Syste me de nume rotation et proce dure denregistrement pour les identificateurs de metteur Maschinenlesbare Karten Anwendungen im Gesundheitswesen Benummerungssystem und Registrierverfahren fu r Kartenausgeberschlu ssel T
11、his European Standard was approved by CEN on 1997-08-01. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference
12、s concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into i
13、ts own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spai
14、n, Sweden, Switzerland and United Kingdom.Page 2 EN 1867 : 1997 BSI 1997 Foreword This European Standard has been prepared by Technical Committee CEN/TC 224, Machine-readable cards, related device interfaces and operations, the secretariat of which is held by AFNOR. This European Standard shall be g
15、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 1998, and conflicting national standards shall be withdrawn at the latest by February 1998. According to the CEN/CENELEC Internal Regulations, the national standards organi
16、zations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword
17、 2 Introduction 3 1 Scope 3 2 Normative references 3 3 Definitions 3 4 Symbols and abbreviations 3 5 Numbering system 3 6 Application and registration procedures 4 7 Registration authority at European level 6 Annexes A (informative) Application for issuer identification number 7 B (normative) Import
18、ant information regarding your number assignment 8 C (informative) Guidance for registration authorities at national level 8 D (informative) Diagram of the issuing of IINs in the health care sector, and appeal procedures 11Page 3 EN 1867 : 1997 BSI 1997 Introduction This European Standard is one of
19、a series of standards describing the characteristics of the identification cards in the health care sector and the use of such cards for European interchange. 1 Scope This European Standard specifies the application and registration procedures for numbers assigned to issuers of cards used for health
20、 care, health care coverage or health care entitlement, that comply with prEN 1387. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the public
21、ations are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 1387 : 199
22、6 Machine readable cards Health care applications Cards: General characteristics EN 23166 Codes for the representation of names of countries (ISO 3166 : 1993) EN ISO/IEC 7812-1 Identification cards Identification of issuers Part 1: Numbering system (ISO/IEC 7812-1 : 1993) EN ISO/IEC 7812-2 Identific
23、ation cards Identification of issuers Part 2: Application and registration procedures (ISO/IEC 7812-2 : 1993) 3 Definitions For the purposes of this standard, the following definitions apply: 3.1 card issuer See EN ISO/IEC 7812-1. 3.2 card holder See EN ISO/IEC 7812-1. 3.3 identification number See
24、EN ISO/IEC 7812-1. 3.4 interchange See EN ISO/IEC 7812-1. 3.5 Issuer Identification Number (IIN) See EN ISO/IEC 7812-1. 3.6 issuer identifier See EN ISO/IEC 7812-1. 3.7 Major Industry Identifier for health care (MII) Number 80 allocated by ISO/IEC JTC1/SC17 for cards issued by health care institutio
25、ns. 3.8 registration authority at national level A body authorized to issue IINs at national level and which is registered with the ISO/IEC 7812 registration authority. 3.9 registration authority at European level A body which maintains the European register of registration authorities at national l
26、evel. 4 Symbols and abbreviations IIN Issuer Identification Number MII Major Industry Identifier for health care 5 Numbering system 5.1 General All Issuer Identification Numbers (IINs) issued in accordance with this standard shall be applied for and registered as described in this standard. 5.2 IIN
27、The IIN is made up of three elements (see figure 1): a) the MII (80 for health care); b) the country code as defined in EN 23166 (three digits); c) the issuer identifier (five digits). Applicants whose application fulfils the criteria for approval described in this standard will be assigned a 10 dig
28、it IIN. 5.3 Check digit See EN ISO/IEC 7812-1.Page 4 EN 1867 : 1997 BSI 1997 Figure 1. Composition of the IIN on health care cards 6 Application and registration procedures 6.1 Application procedure for assignment of a single IIN A card issuer shall apply to its registration authority at national le
29、vel for the assignment of an IIN using the form shown in annex A. Application forms are also available on request from the registration bodies. In the absence of a registration authority at national level, card issuers in that country shall contact their national standard body. The national standard
30、s body shall either set up a registration authority at national level or make an agreement with another national standards body to act as the registration authority at national level for their national card issuers. 6.2 Criteria for approval and rejection of applications 6.2.1 Criteria for approval
31、of an application for a single IIN Applications for a single IIN shall meet all the criteria for approval below and shall not comply with any of the criteria for rejection in 6.2.2. The criteria for approval are: a) the applicant applying for a single IIN with MII = 80 shall not already have an IIN
32、with MII = 80 assigned to it in its own right; b) the IIN with MII = 80 shall be for immediate use, within 12 months of the date of issue; c) the applicant shall be a single entity with legal status; d) the applicant shall use the IIN for cards used for health care, health care coverage or health ca
33、re entitlement; e) the applicant shall pay the corresponding fee required by the registration authority. NOTE. A group of mutually-independent issuers in several member countries may agree to form an alliance under a single entity to issue uniform cards. The country number would vary but it might be
34、 desirable for the issuer number to be the same in each country. In such cases the facility should be available for registration authorities to allocate uniform issuer numbers in several countries, upon request from card issuing applicants. 6.2.2 Criteria for rejection of an application for a single
35、 IIN An application for an IIN shall be rejected by the registration authority at national level when any one of the following conditions exist: a) the applicant is not a card issuer; b) the applicant has previously been assigned an IIN with MII = 80 in its own right; c) the IIN will be used to iden
36、tify or differentiate between products, services or proprietary rights, or solely to facilitate routing, or to identify geographic location; d) the IIN will be used to identify or differentiate between branches or subsidiaries within the applicants organization; e) the applicant has made a request w
37、hich is outside the scope of this European Standard; f) no card will be issued for immediate use, e.g. within 12 months from the date of issue of an IIN. 6.2.3 Appeal process 6.2.3.1 Appeal body Where an application has been rejected by a registration authority at national or European level the appl
38、icant may appeal to the CEN Technical Committee responsible for EN 1867, through its secretariat. 6.2.3.2 Responsibilities The responsibilities of the appeal body shall be: a) to verify whether the application fulfils the criteria for approval as defined in 6.2.1 and none of the criteria for rejecti
39、on as defined in 6.2.2; b) to notify the applicant and the registration authority of their decision; c) in case of approval of the application, the appeal body should instruct the registration authority to issue an IIN to the applicant; d) to respond to general enquiries covering this European Stand
40、ard. Appeal against rejection of an application shall be lodged with the appropriate body within 90 days of the date of the letter of rejection.Page 5 EN 1867 : 1997 BSI 1997 6.2.3.3 Information to be provided Where an application for a single IIN has been rejected by the registration authority at n
41、ational level, the following information shall be provided by the applicant to the relevant appeal body in support of the appeal: a) statement of which rejection clause (see 6.2.2)i s disputed and why the applicant believes that the rejected application fulfils the criteria for approval (see 6.2.1);
42、 b) statement of special circumstances whereby a specific requirement of the rejected application can be met, but such requirement is outside the current procedures and criteria for approval outlined in this European Standard. 6.2.4 Responsibilities of card issuing applicants The responsibilities of
43、 card issuing applicants shall be: a) to comply fully with the numbering system and the procedures for application for IINs as contained in this standard; b) to retain the completed application form containing the IIN assigned to the applicant by the registration authority at national level; c) to i
44、ssue cards using the IIN assigned by the registration authority within 12 months of the date of assignment of the IIN; d) to communicate to the registration authority any proposed changes which would alter material facts contained within the original application. 6.2.5 Registration authority at nati
45、onal level 6.2.5.1 Eligibility to become a registration authority at national level The registration authority at national level shall be a single entity designated in each country. The following bodies may act as registration authority at national level in processing applications for IINs: a) the n
46、ational member body of CEN or an agent appointed by them to act on their behalf; b) the national standards body of another member of CEN, upon a bilateral agreement, if the national standards body is unable to establish a national numbering system. A document entitled Guidance for registration autho
47、rities at national level (annex C) is available to assist registration authorities at national level in assessing the eligibility of applications and to assist in the procedures for dealing with applications. This document is available from the secretariat of the registration authority at European l
48、evel. 6.2.5.2 Resignation If a registration authority at national level which is an agent appointed by the national standards body finds it necessary to resign, six months notice shall be given to the national standards body. If the registration authority is the member body of CEN it shall make bila
49、teral agreement with another member body of CEN. All changes shall be notified to the registration authority at European level. 6.2.5.3 Responsibilities The responsibilities of a registration authority at national level shall be: a) to ensure that the application fully complies with the numbering system and procedures for application for IINs in this standard; b) to verify that the applicants card use, as described on the application form, complies with the scope of EN 1387 : 1996; c) to process, within 60 day
