1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58plated for flight control rods Dimensions The European Standard EN 2327:2006 has the status of a Br
2、itish StandardICS 49.030.50Washers, lock, with radial serrations in alloy steel, cadmium BRITISH STANDARD AEROSPACE SERIESBS EN 2327:2006BS EN 2327:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006ISBN 0 580 47219 1req
3、uest to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI El
4、ectronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesT
5、his document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented o
6、n this committee can be obtained on present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis Br
7、itish Standard is the official English language version of EN 2327:2006. It supersedes BS EN 2327:1989 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: aid enquirers to
8、understand the text;EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2327May 2006ICS 49.030.50 Supersedes EN 2327:1987 English VersionAerospace series - Washers, lock, with radial serrations in alloysteel, cadmium plated for flight control rods - DimensionsSrie arospatiale - Freins stries radiales
9、en acier alli,cadmis pour bielles de commandes de vol - DimensionsLuft- und Raumfahrt - Sicherungen, radial verzahnt, auslegiertem Stahl, verkadmet fr Bediengestnge vonFlugsteuerungen - MaeThis European Standard was approved by CEN on 26 October 2005.CEN members are bound to comply with the CEN/CENE
10、LEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN
11、 member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN member
12、s are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland an
13、d United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2327:2006:
14、 E2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Required characteristics 4 4 Designation .6 5 Marking 7 6 Qualification 7 EN 2327:20063 Foreword This European Standard (EN 2327:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA
15、-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the
16、 status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be
17、the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard supersedes EN 2327:1987. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound t
18、o implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
19、 the United Kingdom. EN 2327:20064 1 Scope This standard specifies the characteristics of lock washers with radial serrations primarily intended for flight control rods. These lock washers are intended to immobilise the rod end in relation to the rod body, whilst allowing a precise positional adjust
20、ment. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2133, Aerospace s
21、eries Cadmium plating of steels with specified tensile strength 1 450 MPa, copper, copper alloys and nickel alloys. EN 2438, Steel FE-PL62 900 MPa Rm 1 100 MPa Bars De 40 mm Aerospace series. 1)EN 2439, Steel FE-PL62 900 MPa Rm 1 100 MPa Forgings De 40 mm Aerospace series. 1)EN 9133, Aerospace serie
22、s Quality management systems Qualification procedure for aerospace standard parts. 3 Required characteristics 3.1 Dimensions Mass Configuration shall correspond to Figures 1, 2 and 3. The dimensions and masses shall conform with values quoted in Tables 1 and 2. Dimensions apply after cadmium plating
23、. 3.2 Surface roughness Ra= 3,2 m. This value applies prior to cadmium plating. 3.3 Material Steel according to EN 2438. Steel according to EN 2439. 3.4 Surface treatment Cadmium plated according to EN 2133, 10 m to 20 m. 1) Published as AECMA Standard at the date of publication of this standard EN
24、2327:20065 Dimensions in millimetres Dimensions in millimetres a N equidistant serrations b R 0,5 to 0,8 c R 0,3 to 0,5 d Identification mark aN equidistant serrations bR 0,5 to 0,8 cR 0,3 to 0,4 dIdentification mark Figure 1 Element for rod body side Code A Figure 2 Element for rod end side Code B
25、Figure 3 Thickness of lock washer assembly EN 2327:20066 Table 1 Dimensions in millimetres d1d2d3a1a2a3a4(a5) b1b2l1l2l3r1r2Diameter code 0,1 + 0,5 0 0,25 0,15 + 0,15 0,25 0,15 0,15 0,15 0,15 0,25 0,25 0 0,15 0,15 0,1508 8,2 12,7 0,58 1,1 1,8 0,5 1,3 1,3 8,4 4,0 6,8 0,7010 10,2 1,0 8,3 12 12,2 19,0
26、1,6 1,2 2,0 2,0 2,0 12,0 6,5 10,5 14 14,2 22,0 0,80 1,4 0,6 2,9 2,9 13,0 8,8 12,5 2,4 2,0016 16,3 25,4 1,8 0,86 1,5 1,6 2,3 0,7 3,0 3,0 14,7 10,0 14,0 2,7 1,45Table 2 a1 + a4Mass lock washer assembly mm g Diameter code N Number of serrations min. max. 0,3 08 42 8721 8821 2,38 1,8 10 6,0 12 50 8742 8
27、842 2,80 4,5 14 3,10 5,8 16 56 8920 90 3,16 9,6 4 Designation EXAMPLE Description block WASHER LOCK Identity block EN2327A08 Number of this standard Code for the lock washer (see Table 3) Diameter code (see Table 1) NOTE If necessary, the code I9005 shall be placed between description block and iden
28、tity block. EN 2327:20067 Table 3 Lock washer Code Element, rod body side, according to Figure 1 A Element, rod end side, according to Figure 2 B Lock washer assembly C 5 Marking In addition to the manufacturers own marking, each lock washer and its packaging shall be marked, using the identity bloc
29、k as defined in Clause 4 of this standard. The marking position and method are at the manufacturers option. The marking, when it is possible, shall be indelible and shall not impair the characteristics of the lock washer. 6 Qualification According to EN 9133. EN 2327:2006BS EN BSI389 Chiswick High R
30、oadLondonW4 4AL2327:2006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amen
31、dment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard wo
32、uld inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the lat
33、est editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In respo
34、nse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through i
35、ts Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI a
36、re kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online acces
37、s to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardiz
38、ation bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude
39、the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
