1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58assembly slots Dimensions and loadsThe European Standard EN 2588:2006 has the status of a British S
2、tandardICS 49.035Bearings, spherical plain in corrosion resisting steel with BRITISH STANDARD AEROSPACE SERIESBS EN2588:2006BS EN 2588:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006ISBN 0 580 48510 2Cross-references
3、The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Stand
4、ards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover,
5、an inside front cover, the EN title page, pages 2 to 9 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this committee can be obtained on re
6、quest to its secretary. present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis British Standa
7、rd is the official English language version of EN 2588:2006. It supersedes BS EN 2588:1992 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: aid enquirers to understand t
8、he text;EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2588May 2006ICS 49.035 Supersedes EN 2588:1988 English VersionAerospace series - Bearings, spherical plain in corrosionresisting steel with assembly slots - Dimensions and loadsSrie arospatiale - Rotules lisses en acier rsistant lacorrosion a
9、vec encoches dassemblage - Dimensions etchargesLuft- und Raumfahrt - Gelenklager auskorrosionsbestndigem Stahl mit Einfhrnut - Mae undBelastungenThis European Standard was approved by CEN on 13 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
10、 conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in thr
11、ee official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austr
12、ia, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STAN
13、DARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2588:2006: E2 Contents Page Foreword 3 1 Scope .4 2 No
14、rmative references .4 3 Terms and definitions.4 4 Symbols and abbreviations5 5 Required characteristics 5 5.1 Configuration, dimensions and masses .5 5.2 Surface roughness5 5.3 Clearances and loads .7 5.4 Materials 8 5.5 Surface treatment8 6 Designation .9 7 Marking 9 8 Technical specification.9 EN
15、2588:20063 Foreword This European Standard (EN 2588:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Na
16、tional Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting nat
17、ional standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Stand
18、ard supersedes EN 2588:1988. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
19、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2588:20064 1 Scope This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel,
20、with assembly slots, metric series, with or without lubrication holes and groove, intended for use in fixed or moving parts of aircraft structure and control mechanisms. They may be used in the temperature range from 54 C to 150 C. However, as they are lubricated with the following greases (see EN 2
21、337): ester type very high pressure grease (code letter A), operating range from 73 C to 121 C or, synthetic hydrocarbon type very high pressure grease general purpose (code letter B), operating range from 54 C to 177 C. Their field of application when lubricated with grease code letter A is limited
22、 to 121 C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1132-1, Rol
23、ling bearings Tolerances Part 1: Terms and definitions. ISO 8075, Aerospace Surface treatment of hardenable stainless steel parts. EN 2030, Steel FE-PM43 Hardened and tempered Bars D 150 mm Aerospace series. 1)EN 2337, Aerospace series Spherical plain bearings Technical specification. EN 2424, Aeros
24、pace series Marking of aerospace products. EN 2491, Aerospace series Molybdenum disulphide dry lubricants Coating methods. 3 Terms and definitions For the purposes of this standard, the terms and definitions given in ISO 1132-1 apply. 1) Published as AECMA Standard at the date of publication of this
25、 standard. EN 2588:20065 4 Symbols and abbreviations The following symbols for tolerances are used: dmp: single plane mean bore diameter deviation ds: deviation of a single bore diameter Dmp: single plane mean outside diameter deviation Ds: deviation of a single outside diameter : angle of tilt of t
26、he outer ring with respect to the inner ring, the spherical surface of the outer ring being completely in contact with the inner ring 5 Required characteristics 5.1 Configuration, dimensions and masses According to Figures 1 and 2 and Tables 1 and 2. The dimensions are expressed in millimetres and a
27、pply after surface treatment. 5.2 Surface roughness According to Figure 1. The values are expressed in micrometres and apply before surface treatment. a0,4 for spherical surface with dry-film lubricant; 0,2 for non-coated surface Figure 1 EN 2588:20066 Code letter E: Bearing without lubrication hole
28、s and groove Code letter F: Bearing with lubrication holes and groove on inner ring Code letter G: Bearing with lubrication holes and groove on outer ring Figure 2 Table 1 d B C D Tolerances m d1K r1r2 Mass code number nom. 0 0,06 0 0,25 dmpdsDmpDsmin. min.ag 05 5 06 6 6 4 14 8 10 0,3to 0,6 0,4 to 0
29、,7 13 4 08 8 8 5 16 80135+10 13 15 7 10 10 9 6 19 102+13 16 0,5 to 0,8 12 11 12 12 10 7 22 15 18 11 15 15 15 12 9 26 90156+18 22 0,5to 0,8 0,6 to 1 8 28 17 17 14 10 30 80113+20 25 10 44 20 20 16 12 35 24 29 9 60 25 25 20 16 42 29 36 7 105 30 30 22 18 47 100133+110198+34 41 145 35 35 25 20 55 39 47 0
30、,7to 1,1 0,9 to 1,3 6 210 40 40 28 22 62 45 53 285 45 45 32 25 68 50 60 7 420 50 50 35 28 75 120153+1302310+55 66 515 60 60 44 36 90 66 80 1 050 70 70 49 40 105 77 92 1 510 80 80 55 45 120 150194+1502813+88 105 1,2to 1,7 1,4 to 1,8 6 2 250 aMaximum values for the user EN 2588:20067 Table 2 d E aE1 a
31、F F1 F2 G G1 G2 code number nom. 0,2 0,2 0,2 0,2 0,2 + 0,1 0 + 0,1 0 + 0,1 0 05 5 06 6 08 8 10 10 12 12 Without lubrication holes and groove 15 15 1,5 2,2 1,75 17 17 2,8 2,5 20 20 2 2,9 3 3 1 2 25 25 1,5 2 4 2,5 30 30 4,5 35 35 2 2,5 5 40 40 5,5 3 45 45 4 6,2 1,5 3,5 50 50 2,5 2,5 4 5 3 7 2 4 60 60
32、6 9 2,5 5 70 70 3 4,5 10 5,5 80 80 4 3 5 8 4 12 3,5 7,5 aThree holes at intervals of 120 on the periphery. 5.3 Clearances and loads See Table 3. EN 2588:20068 Table 3 Internal clearances m Permissible static loads kN axial radial max. d Code number normal code letter N reduced code letter P normal c
33、ode letter N normal code letter P radialaCsaxial bCa05 12 0,68 06 16 0,9 08 26 1,5 10 45 2,3 12 60 3,2 15 90 5,55 17 110 6,95 20 160 9,85 25 270 18,15 30 30 to 60 1 to 30 15 8 380 25,16 35 500 30 40 630 36,66 45 820 48,1 50 40 to 80 1 to 40 20 10 1 000 60,96 60 1 600 102,76 70 2 000 127,8 80 50 to 1
34、00 1 to 50 25 15 2 600 182,8 aThese loads can only be applied at 90 with respect to the opening of the slots. bThese loads shall be applied to the outer ring from the side opposite to the slots. 5.4 Materials Inner ring: according to EN 2030, 55 HRC to 62 HRC Outer ring: according to EN 2030, 58 HRC
35、 to 58 HRC 5.5 Surface treatment Dry-film lubricant on the spherical surface of inner or outer ring (antiscoring treatment) applied according to EN 2491. Passivation according to ISO 8075: code letter T Without surface treatment (passivation): without code letter EN 2588:20069 6 Designation EXAMPLE
36、Description block PLAIN BEARING Identity block EN2588AP15ET Number of this standard Grease code letter (see Clause 1) Internal clearances code letter (see Table 3) Diameter code number d (see Table 1) Lubrication holes and grooves code letter (see Figure 2) Surface treatment code letter (see 5.5) NO
37、TE If necessary, the code 9005 shall be placed between the description block and the identity block. 7 Marking EN 2424, style A The marking position is at the manufacturers option. 8 Technical specification See EN 2337. EN 2588:2006BS EN BSI389 Chiswick High RoadLondonW4 4AL2588:2006BSI British Stan
38、dards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Stan
39、dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technica
40、l committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standar
41、dsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standard
42、s, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exp
43、orters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards develo
44、pments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Stand
45、ards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under
46、the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implement
47、ing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
