1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-102:1996 Elements of electrical and optical connection Test methods Part 102: Examination of dimensions and mass The European Standard EN 2591-102:1996 has the status of a British Standard ICS 49.060BSEN 2591-102:1996 This British Standard, having been pr
2、epared under the directionof the Engineering SectorBoard, was published underthe authority of theStandards Board and comesinto effect on 15 July 1996 BSI 11-1998 First published as BS EN 2591-A2 February 1994 The following BSI references relate to the work on this standard: Committee reference ACE/6
3、 Draft for comment 92/84568 DC ISBN 0 580 25950 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ACE/6, Aerospace avionic, electrical and fibre-optic technology, upon which the following bodies were represented: British
4、Airways British Cable Makers Confederation British Rubber Manufacturers Association Civil Aviation Authority (Airworthiness Division) Federation of the Electronics Industry Ministry of Defence Society of British Aerospace Companies Amendments issued since publication Amd. No. Date CommentsBSEN2591-1
5、02:1996 BSI 11-1998 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Means of measurement 3 List of references Inside back coverBSEN 2591-102:1996 ii BSI 11-1998 National foreword This British Standard has been prepared by
6、 Technical Committee ACE/6 and is the English language version of EN 2591-102:1996 Aerospace series Elements of electrical and optical connection Test methods Part 102: Examination of dimensions and mass, published by the European Committee for Standardization (CEN). It supersedes BS EN 2591-A2:1994
7、 which is withdrawn. BS EN 2591-102:1996 was produced as a result of international discussions in which the United Kingdom took an active part. Cross-reference The British Standard corresponding to the European Standard referred to in the text is identical in number and title with that given in clau
8、se 2. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comp
9、rises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.EURO
10、PEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2591-102 February 1996 ICS 49.060 Supersedes EN 2591-A2:1993 Descriptors: Aircraft industry, aircraft equipment, connecting equipment, tests, verification, dimensional measurements, mass English version Aerospace series Elements of electrical and opti
11、cal connection Test methods Part 102: Examination of dimensions and mass Srie arospatiale Organes de connexion lectrique et optique Mthodes dessais Partie 102: Examen des dimensions et masses Luft- und Raumfahrt Elektrische und optische Verbindungselemente Prfverfahren Teil 102: Prfung der Mae und M
12、asse This European Standard was approved by CEN on 1993-12-16. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical ref
13、erences concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member
14、into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
15、 Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 Copyright reserved to CEN members Ref. No. EN 2591-102:1996 EEN2591-102:1996 2 BSI 11-1998 Foreword
16、This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). The alphanumerical designation of the Parts of EN2591 has been abandoned for a numerical designation in line with the Internal Regulations of CEN/CENELEC. This European Standard is the integral r
17、eproduction of the European Standard EN2591-A2 after application of this decision, without any other modification than the change in numbering. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Augu
18、st 1996, and conflicting national standards shall be withdrawn at the latest by August 1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, G
19、ermany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN2591-102:1996 BSI 11-1998 3 1 Scope This standard specifies a method for checking the dimensions and mass of elements of electrical and optical connection. It shall be
20、used together with EN 2591. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequ
21、ent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 2591, Aerospace series Elements of electrical and optical connection
22、 Test methods General. 3 Means of measurement The dimensions, mass, thickness of protection 1)and surface roughness 1)shall be checked by suitable measuring instruments or instruments required by the technical specification (example: gauge). In the case of moving parts, backlash shall be eliminated
23、before the dimensions are checked in both directions. 1) If required.4 blankBSEN2591-102:1996 BSI 11-1998 List of references See national foreword.BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
24、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Eu
25、rope and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our pro
26、ducts and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers
27、members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996
28、7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international sta
29、ndards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up t
30、o date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyrig
31、ht, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise
32、 without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
