1、BRITISH STANDARD AEROSPACE SERIES BSEN 2591-414:1998 Elements of electrical and optical connection Testmethods Part 414: Unmating of lanyard release connectors The European Standard EN2591-414:1998 has the status of a British Standard ICS 49.060BSEN2591-414:1998 This British Standard, having been pr
2、epared under the directionof the Engineering SectorCommittee, was publishedunder the authority ofthe Standards Committee andcomes into effect on 15 November1998 BSI 05-1999 ISBN 0 580 30713 1 National foreword This British Standard is the English language version of EN 2591-414:1998. The UK particip
3、ation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic, electrical and fibre optic technology, to Subcommittee ACE/6/3, Aerospace connectors, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European commi
4、ttee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-re
5、ferences The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Ca
6、talogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document c
7、omprises a front cover, an inside front cover, pages i and ii, theEN title page, pages2 to4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since
8、 publication Amd. No. Date CommentsBSEN2591-414:1998 BSI 05-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 2591-414 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2591-414 August 1998 ICS 49.060 Descriptors: Aircraft industry, aircraftequipment, connec
9、ting equipment, test English version Aerospace series Elements of electrical and optical connection Test methods Part414: Unmating of lanyard release connectors Srie arospatiale Organes de connexion lectrique et optique Mthodes dessais Partie414: Dsaccouplement des connecteurs largables Luft- und Ra
10、umfahrt Elektrische und optische Verbindungselemente Prfverfahren Teil414: Trennung von Steckverbindem mit Kabelzugentriegelung This European Standard was approved by CEN on29 January1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi
11、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official ver
12、sions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,
13、 CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat:
14、rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2591-414:1998 EEN2591-414:1998 BSI 05-1999 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufa
15、cturers (AECMA). After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be
16、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February1999, and conflicting national standards shall be withdrawn at the latest by February1999. According to the CEN/CENELEC Internal Regulations, the national standards organiz
17、ations of the following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and theUnitedKingdom. Contents Page Foreword 2 1
18、 Scope 3 2 Normative references 3 3 Preparation of specimens 3 4 Apparatus 3 5 Method 3 Figure 1 4 BSI 05-1999 3 EN2591-414:1998 1 Scope This standard specifies a method of assessing the unmating ability of lanyard release connectors. It shall be used together with EN2591. 2 Normative references Thi
19、s European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publica
20、tions apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN2591, Aerospace series Elements of electrical and optical connection Test methods General. EN2591-101, Aerospace series Ele
21、ments of electrical and optical connection Test methods Part101: Visual examination 1) . EN2591-201, Aerospace series Elements of electrical and optical connection Test methods Part201: Contact resistance Low level. EN2591-202, Aerospace series Elements of electrical and optical connection Test meth
22、ods Part202: Contact resistance at rated current. EN2591-207, Aerospace series Elements of electrical and optical connection Test methods Part207: Voltage proof test. EN2591-310, Aerospace series Elements of electrical and optical connection Test methods Part310: Cold 1) . EN2591-313, Aerospace seri
23、es Elements of electrical and optical connection Test methods Part313: Artificial rain 1) . EN2591-408, Aerospace series Elements of electrical and optical connection Test methods Part408: Mating and unmating forces 1) . 3 Preparation of specimens 3.1 Specimens shall be prepared according to the tec
24、hnical specification. 3.2 Unless specified in the technical specification, the following details shall be stated: method of mounting, type of cable and definition of specimen wiring; initial measurements (if applicable); mating and unmating forces; contact resistance; value of the pull-out force; an
25、gle of application of the pull-out force; number of tests per direction; value of the test voltage; final measurements (if applicable). 4 Apparatus The test equipment shall provide a pulling speed of(5,5 0,5)m/s after a travel of30mm. 5 Method 5.1 Initial measurements (if applicable) Specimens shall
26、 be subjected to the following test sequence: EN2591-408, mating force; EN2591-201 or EN2591-202; EN2591-207. 5.2 Procedure The specimens shall be tested to EN2591-313 (without initial nor final measurements) and then immediately to EN2591-310 at a temperature of(55 2)C for1h. Then, within2min, the
27、specimens shall be mounted on the test equipment and disengaged by applying a force in the four directions to the lanyard as shown in Figure 1. The angle of application of the pull-out force (!) shall be as specified. The unmating force shall be applied after the lanyard has first been made taut wit
28、hout stress. 5.3 Final measurements (if applicable) The specimens shall be subjected to the following test sequence: EN2591-101; EN2591-408, for the mating force; EN2591-201 or EN2591-202; EN2591-207, method A. 1) Published as AECMA Prestandard at the date of publication of this standardEN2591-414:1
29、998 4 BSI 05-1999 Figure 1 blankBSEN 2591-414:1998 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporate
30、d by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone findi
31、ng an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensure
32、s that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI po
33、licy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service
34、. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the
35、purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Ex
36、cept as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, i
37、n the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
