1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58general purpose Operating temperatures between 55 C and 200 C Part 005: Screened (spiral) and jacke
2、ted, CO2laser printable Product standardThe European Standard EN 2713-005:2006 has the status of a British StandardICS 49.060Aerospace series Cables, electrical, single and multicore for BRITISH STANDARDBS EN 2713-005:2006BS EN 2713-005:2006This British Standard was published under the authority of
3、the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006ISBN 0 580 49448 9Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with
4、 a British Standard cannot confer immunity from legal obligations. National forewordThis British Standard was published by BSI. It is the UK implementation of EN 2713-005:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre o
5、ptic technology, to Subcommittee ACE/6/-/2, Aerospace Cables.A list of organizations represented on ACE/6/-/2 can be obtained on request to its secretary.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2713-005 July 2006 ICS 49.060 English Version Aerospace series - Cables, electrical, single a
6、nd multicore for general purpose - Operating temperatures between - 55 C and 200 C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard Srie arospatiale - Cbles, lectriques, mono et multiconducteurs dusage gnral - Tempratures de fonctionnement comprises entre - 55 C et
7、200 C - Partie 005 : Blinds (guips) et gains, marquables au laser CO2 - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, fr allgemeine Verwendung - Betriebstemperaturen zwischen - 55 C und 200 C - Teil 005: Geschirmt (Umseilung) und ummantelt, CO2 Laser bedruckbar -
8、Produktnorm This European Standard was approved by CEN on 27 April 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra
9、phical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C
10、EN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvi
11、a, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Bruss
12、els 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2713-005:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Materials and construction .4 5 Required characteristics.7 6 Quality
13、 assurance8 7 Designation 8 8 Identification and marking 9 9 Packaging, labelling and delivery lengths 9 10 Technical specification .9 EN 2713-005:20063 Foreword This European Standard (EN 2713-005:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardizatio
14、n (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given
15、 the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may b
16、e the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, B
17、elgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2713-005:20064 1 Scope
18、 This standard specifies the characteristics of CO2laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between 55 C and 200 C. It shall also be possible to mark these cables by hot st
19、amp printing or ink jet printing. These markings shall be in accordance with EN 3838. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of
20、the referenced document (including any amendments) applies. EN 2083, Aerospace series Copper or copper alloy conductors for electrical cables Product standard. EN 2235, Aerospace series Single and multicore electrical cables, screened and jacketed Technical specification. EN 2266-003, Aerospace seri
21、es Cables, electrical, for general purpose Operating temperatures between 55 C and 200 C Part 003: Ink jet printable Product standard. EN 2713-002, Aerospace series Cables, electrical, single and multicore for general purpose Operating temperatures between 55 C and 200 C Part 002: Screened and jacke
22、ted General.EN 3475-100*, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General. EN 3838, Aerospace series Requirements and tests on user-applied markings on aircraft electrical cables.1)EN 9133, Aerospace series Quality management systems Qualification Procedure for aeros
23、pace standard parts. 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 3475-100 apply. 4 Materials and construction 4.1 Materials These cables shall consist of the following: cores according to EN 2266-003, top coat dispersion fluorocarbon; num
24、ber of cores 1 to 4. 2 to 4-core cables shall be twisted together according to EN 2235. *And all its parts quoted in Table 2. 1) Published as ASD Prestandard at the date of publication of this standard. EN 2713-005:20065 Filler cores shall not be permitted. Screen: nickel-plated copper stranded spir
25、al screen; for dimensions of strands, see Table 1; material according to EN 2083, tests according to EN 3475-100; construction according to EN 2235. Outer jacket: layer of polyimide with total wall thickness (nominal value) of 30 m, coated on both sides with a layer 2,5 m thick of fluorocarbon; dire
26、ction of winding immaterial - overlap 67 % min.; or two layers - winding direction of first immaterial, overlap 51 % min. and second layer in opposite direction with 20 % min. overlap; top coat of dispersion fluorocarbon, wall thickness 15 m min. including the necessary additives for the acceptance
27、of user-applied CO2laser marking. 4.2 Construction See EN 2083 and Table 1. EN 2713-005:20066 Table 1 Number of cores Code for nominal section Nominal section AWG a Linear resistance at 20 C Screen strands nominal diameter External diameter Mass max. max. max. mm2/km mm mm kg/km 001 0,15 26 160,0 0,
28、08 1,31 4,6 002 0,25 24 114,0 0,08 1,40 5,6 004 0,4 22 60,0 0,08 1,56 7,2 006 0,6 20 33,2 0,08 1,82 10,5 010 1 18 21,1 0,08 2,07 14,4 012 1,2 16 14,5 0,10 2,38 20,0 020 2 14 10,9 0,10 2,62 25,4 030 3 12 6,8 0,10 3,17 38,5 050 5 10 4,2 0,12 3,87 61,0 1 051 b5 10 4,1 0,12 3,92 63,7 001 0,15 26 165,00
29、0,08 2,15 8,0 002 0,25 24 117,00 0,08 2,34 10,0 004 0,4 22 61,70 0,08 2,65 13,1 006 0,6 20 34,10 0,10 3,20 20,6 010 1 18 21,70 0,10 3,73 28,5 012 1,2 16 14,90 0,12 4,25 39,5 020 2 14 11,20 0,12 4,83 50,5 030 3 12 6,99 0,15 5,88 79,4 050 5 10 4,32 0,20 7,28 128,2 2 051 b5 10 4,22 0,20 7,40 132,3 001
30、0,15 26 165,00 0,08 2,28 10,8 002 0,25 24 117,00 0,10 2,52 14,2 004 0,4 22 61,70 0,10 2,88 19,0 006 0,6 20 34,10 0,12 3,48 29,5 010 1 18 21,70 0,12 4,04 41,8 012 1,2 16 14,90 0,12 4,59 56,1 020 2 14 11,20 0,15 5,15 75,1 3 030 3 12 6,99 0,20 6,35 119,8 001 0,15 26 165,0 0,10 2,53 14,2 002 0,25 24 117
31、,0 0,10 2,76 17,7 004 0,4 22 61,7 0,10 3,13 24,0 006 0,6 20 34,1 0,12 3,78 38,1 010 1 18 21,7 0,12 4,48 53,4 012 1,2 16 14,9 0,15 5,13 75,0 4 020 2 14 11,2 0,20 5,84 102,0 aAWG = Closest American Wire Gage bFlexible construction which may be used as an alternative 4.3 Colour coding of cores and jack
32、et See EN 2713-002. EN 2713-005:20067 5 Required characteristics According to EN 2235 and EN 3475-100 See Table 2. Table 2 EN 3475- Designation of the test Details 201 Visual examination Applicable 202 Mass Applicable; see Table 1. 203 Dimensions Applicable; see Table 1. 301 Ohmic resistance per uni
33、t length Applicable; see Table 1. 302 Voltage proof test Applicable 303 Insulation resistance Applicable 304 Surface resistance Applicable 305 Overload resistance Not applicable 401 Accelerated ageing Applicable Temperature (250 5) C 402 Shrinkage and delamination Applicable Temperature (250 5) C Ma
34、ximum shrinkage at each end of cable: jacket 2 mm, core insulation, see EN 2266-003. 403 Delamination and blocking Applicable Temperature (250 5) C 404 Thermal shock Applicable Temperature (250 5) C Maximum shrinkage at each end of cable: jacket 2 mm, core insulation, see EN 2266-003. 405 Bending at
35、 ambient temperature Applicable 406 Cold bend test Applicable 407 Flammability Applicable Extinguishing time: 3 s max. 408 Fire resistance Not applicable 409 Air-excluded ageing Not applicable 410 Thermal endurance Applicable 40 000 h (temperature 200 C) 411 Resistance to fluids Applicable 501 Dynam
36、ic cut-through Not applicable 502 Notch propagation Applicable Notch depth: 40 m continued EN 2713-005:20068 Table 2 (concluded) EN 3475- Designation of the test Details 503 Scrape abrasion Applicable Test force on needle for cables 0,15 mm2to 0,60 mm2= 8 N 1,00 mm2to 1,20 mm2= 10 N 2,00 mm2to 5,00
37、mm2= 12 N 504 Torsion Not applicable 505 Tensile test on conductors and strands Applicable 506 Plating continuity Applicable 507 Adherence of plating Applicable 508 Plating thickness Applicable 509 Solderability Not applicable 601 Smoke density Applicable 602 Toxicity Applicable 603 Resistance to we
38、t arc tracking Not applicable 604 Resistance to dry arc propagation Not applicable 701 Strippability and adherence of insulation to the conductor Applicable 702 Screen pushback capability Not applicable 703 Permanence of manufacturers marking Applicable 6 Quality assurance See EN 9133. 7 Designation
39、 EXAMPLE Description block CABLE, ELECTRICAL Identity block EN2713-005B002F Number of this standard Code letter for number of cores (see EN 2713-002) Code for nominal section (see Table 1) Code letter for colour coding of cores and jacket (see EN 2713-002) NOTE If necessary, the code I9005 shall be
40、placed between the description block and the identity block. EN 2713-005:20069 8 Identification and marking See EN 2713-002. 9 Packaging, labelling and delivery lengths See EN 2235. 10 Technical specification See EN 2235. EN 2713-005:2006BS EN BSI389 Chiswick High RoadLondonW4 4AL2713-005:2006BSI Br
41、itish Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of Br
42、itish Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of th
43、e technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buyi
44、ng standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for internationa
45、l standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical H
46、elp to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standa
47、rds developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via Bri
48、tish Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permit
49、ted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary deta
