1、BS EN 2869:2009ICS 49.030.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Nuts, hexagonal,slotted/castellated,normal height,normal accross flats,in heat resistingsteel, passivated Classification: 1 100MPa (at ambienttemperature) / 650 CLicense
2、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 68569 9Amendments/corrigenda issued since publicationDate Commen
3、tsBS EN 2869:2009National forewordThis British Standard is the UK implementation of EN 2869:2009. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems.A list of organizations represented on this committee can be obtained onrequ
4、est to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03
5、/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2869 November 2009 ICS 49.030.30 English Version Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated -Classificatio
6、n: 1 100 MPa (at ambient temperature) / 650 C Srie arospatiale - crous hexagonaux crneaux, hauteur normale, surplats normaux, en acier rsistant chaud, passivs - Classification : 1 100 MPa ( temprature ambiante) / 650 C Luft- und Raumfahrt - Flache Kronenmuttern, normale Hhe, normale Schlsselweite, a
7、us hochwarmfestem Stahl, passiviert - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 C This European Standard was approved by CEN on 17 October 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of
8、 a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A vers
9、ion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, De
10、nmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALI
11、SATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2869:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Un
12、controlled Copy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Required characteristics .54 Designation 75 Marking .76 Technical specification .8Bibliography 9Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled C
13、opy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 3 Foreword This document (EN 2869:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
14、received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2
15、010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.
16、According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
17、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 4 1 Scope Th
18、is European Standard specifies the characteristics of hexagonal slotted/castellated nuts, normal height, normal across flats, in heat resisting steel, passivated. Classification: 1 100 MPa 1) / 650 C 2) .2 Normative references The following referenced documents are indispensable for the application
19、of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2398, Aerospace series Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) Rm 900 MPa Bars for machined bolts D 25 mm EN
20、2399, Aerospace series Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) Rm 900 MPa Bars for forged bolts D 25 mm EN 2424, Aerospace series Marking of aerospace products EN 2516, Aerospace series Passivation of corrosion resisting steels and decontamination of nickel base alloys EN 3639, Aerospace s
21、eries Heat resisting alloy FE-PA2601 Softened and cold worked Wire for forged fasteners D 15 mm 900 MPa Rm 1 100 MPa 3)EN 9100, Quality Management Systems - Requirements for Aviation, Space and Defense Organizations ISO 4147, Aerospace Nuts, hexagonal, slotted (castellated), normal height, normal ac
22、ross flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 C, 600 MPa (at ambient temperature)/235 C, 900 MPa (at ambient temperature)/425 C, 1100 MPa (at ambient temperature)/235 C, 1100 MPa (at ambient temperature)/315 C, 1100 MPa (at ambient temperature)/650 C, 1210 MPa (a
23、t ambient temperature)/730 C, 1250 MPa (at ambient temperature)/235 C and 1550 MPa (at ambient temperature)/ 600 C Dimensions ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts ISO 8788, Aerospace Nuts, metric Tolerances of form and position ISO 9139, Aerospace Nuts, plain
24、or slotted (castellated) Procurement specification TR 3823, Aerospace series Materials for plain, slotted and self-locking by plastic ring hexagonal nuts 4) 1) Corresponds to strength class of the associated bolt, the 100 % load of which it is able to withstand, when tested at ambient temperature, w
25、ithout breaking or cracking. 2) Maximum temperature that the nut is able to withstand, without permanent alteration to its original characteristics, after ambient temperature has been restored. The maximum temperature is conditioned by the material. 3) Published as ASD-STAN Prestandard at the date o
26、f publication of this standard. 4) Published as ASD-STAN Technical Report at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 5 3 Required characteristics 3.1 Configuration Dim
27、ensions Masses See Figure 1 and Table 1. Dimensions and tolerances are in conformity with ISO 4147, expressed in millimetres and apply after surface treatment. Form and position tolerances shall be in conformity with ISO 8788. 3.2 Materials EN 2398, EN 2399, EN 3639 or TR 3823. 3.3 Surface treatment
28、 EN 2516, process class appropriate to the material. These values in micrometres apply before surface treatment. The values do not apply to threads the surface texture of which will be achieved by usualmanufacturing methods. Remove sharp edges 0,1 to 0,4. Details of form not stated are at the manufa
29、cturers option. 6,3 1,6 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 6 Key 1 6 Slots 2 Form of contour within limiting dimensions at manufacturers option 3 Thread 4 Marking aTooling marks are permissible within cou
30、nterbore. b Dimension G applies to: height below slots (diameter codes 040 to 240); height of flats (diameter codes 060 to 240); bottom of counterbore (diameter 040 to 070). cThis dimension also applies to upper chamfer. All forms of entry (chamfer or radius) optional within these limiting dimension
31、s. dDiameter M may be tangential to, but shall not intrude on the flats. Figure 1 Y Form (radius or chamfer) at bottom of slot at manufacturers option X-X Form for diameter codes 040 and 050 X-X Form for diameter codes 060 and 070 X-X Form for diameter codes 080 to 240 Licensed Copy: Wang Bin, ISO/E
32、XCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 7 Table 1 Diameter code Thread a E FG H JK LM N S Mass kg/1 000 piecesapprox. Split pin diameter bmin. Nom. Tol. 0,25 0,25 0,25 H15 min. Tol. min. 0 0,3 H14040 MJ40,7 - 4H6H 7,6 7 h12 3 5 4 4,2 + 0,6
33、6,4 0,5 1,3 1,3 1 050 MJ50,8 - 4H6H 8,7 8 3,75 6,2 5 5,2 7,4 1,7 1,8 1,4 060 MJ61 - 4H5H 10,9 10 h13 4,5 6,9 9 6 6,3 + 0,89,3 2,8 070 MJ7- 4H5H 12 11 5,25 8,1 10 7 7,3 10,2 2,1 3,8 1,8 080 MJ81 - 4H5H 14,3 13 6 8,8 11 8,3 12,2 5,6 100 MJ101,25 - 4H5H 18,9 17 7,5 11,1 13 10,3 16 0,62,6 11,5 2,3 120 M
34、J121,25 - 4H5H 21,1 19 9 12,6 16 12,3 18 16 140 MJ141,5 - 4H5H 24,5 22 10,5 14,9 18 14,4 21 3,2 24,5 2,9 160 MJ161,5 - 4H5H 26,8 24 12 16,4 22 16,4 23 33,5 180 MJ181,5 - 4H5H 30,2 27 13,5 18,7 25 18,4 26 448,5 3,7200 MJ201,5 - 4H5H 33,6 30 15 20,2 28 20,4 29 66 220 MJ221,5 - 4H5H 35,8 32 16,5 21,7 3
35、0 22,4 30,9 78,9 240 MJ242 - 4H5H 40,4 36 18 23,7 32 24,5 34,9 113,9 aIn accordance with ISO 5855-2. bFor information, in conformity with EN 2367. 4 Designation EXAMPLE Description block NUT Identity block EN2869080 Number of this standard Diameter code (see Table 1) NOTE If necessary the originator
36、 code I9005 shall be placed between the description block and the identity block. 5 Marking See Table 2. Table 2 Diameter code EN 2424 Style 040 G 050 to 070 N 080 to 160 C 180 to 240 A Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009
37、EN 2869:2009 (E) 8 6 Technical specification ISO 9139, except for approval of manufacturers, see EN 9100. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN 2869:2009EN 2869:2009 (E) 9 Bibliography 1 EN 2367, Aerospace series Split pins in steel
38、EN 2573 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSIBS EN2869:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body respon
39、sible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments
40、oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the
41、inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publication
42、s should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those th
43、at have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are als
44、o available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For deta
45、ilsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.Copyri
46、ghtCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any
47、 form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used fo
48、r any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 25/03/2010 06:49, Uncontrolled Copy, (c) BSI
