1、BS EN 3-10:2009ICS 13.220.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPortable fireextinguishersPart 10: Provisions for evaluatingthe conformity of a portable fireextinguisher to EN 3-7Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55
2、, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 July 2010 BSI 2010ISBN 978 0 580 54044 8Amendments/corrigenda issued since publicationDate CommentsBS EN 3-10:2009National forewordThis British Standard is the UK impl
3、ementation of EN 3-10:2009. Itsupersedes BS EN 3-6:1996 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee FSH/2, Fire extinguishers.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not
4、purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-1
5、0:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3-10 November 2009 ICS 13.220.10 Supersedes EN 3-6:1995English Version Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 Extincteurs dincendie portatifs - Partie 10: Dis
6、positions pour lvaluation de la conformit dun extincteur dincendie portatif lEN 3-7 Tragbare Feuerlscher - Teil 10: Festlegungen fr die Besttigung der Konformitt tragbarer Feuerlscher nach EN 3-7 This European Standard was approved by CEN on 17 October 2009. CEN members are bound to comply with the
7、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre o
8、r to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official ve
9、rsions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
10、 Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nation
11、al Members. Ref. No. EN 3-10:2009: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .54 Symbols and abbreviations 55 Documentation for
12、 type testing and audits 65.1 Identification of the applicant .65.2 Identification of the manufacturer 65.3 Identification of the extinguisher .65.4 Documents provided with the extinguisher 65.5 Pressure Safety 65.6 Quality Management System 65.7 Extinguishing media toxicological information 66 Init
13、ial type testing 67 Factory Production Control (FPC) .77.1 Requirements .77.2 Additional requirements .88 Reference numbering and marking .89 Items to be regularly checked and recorded during production 810 Surveillance . 11Annex A (informative) Points to be checked by the surveillance body 12A.1 Mi
14、nimum audit frequency 12A.2 Audits content . 12A.2.1 Manufacturer and subcontractors 12A.2.2 Applicant 13A.3 Audit report . 13Annex B (normative) Technical Data Sheet of an extinguisher 14Annex C (normative) Model of laboratory report 16PORTABLE FIRE EXTINGUISHER 16Annex 1 to the test report . 35Ann
15、ex 2 to the test report . 38Annex 3 to the test report . 39Bibliography . 40Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 3 Foreword This document (EN 3-10:2009) has been prepared by Technical Committee CEN/TC 70 “M
16、anual means of fire fighting equipment”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn
17、at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3-6:1995. EN 3 consists of the
18、following parts, under the general title Portable fire extinguishers: Part 7 1): Characteristics, performance requirements and test methods; Part 8 2): Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable press
19、ure equal to or lower than 30 bar; Part 9 2): Additional requirements to EN 3-7 for pressure resistance of CO2extinguishers; Part 10 3): Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7. According to the CEN/CENELEC Internal Regulations, the national standards organ
20、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro
21、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1) Superseded EN 3-1, EN 3-2, EN 3-4 and EN 3-5. 2) EN 3-8 and EN 3-9 superseded EN 3-3. 3) EN 3-10 supersedes EN 3-6. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-
22、10:2009EN 3-10:2009 (E) 4 1 Scope This European Standard specifies the minimum requirements for attesting the conformity of portable fire extinguishers to EN 3-7, as well as the requirements for the quality and production control of the fire extinguishers. It specifies the documentation to be provid
23、ed regarding: identification of the applicant; identification of the manufacturer, if not the applicant; identification of subcontractor(s), if applicable; identification of the extinguisher; documents provided with the extinguisher; CE marking; quality management system; extinguishing media toxicol
24、ogical information. It specifies methods for: type testing; factory assessment; controls during production. NOTE 1 A test report and a satisfactory audit supporting documentation could form the basis for an applicant to request a certification of his product from an EA accredited certification body.
25、 Additional requirements can be made by national regulations and/or quality marks. NOTE 2 Where appropriate, component family testing could be applied. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi
26、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3-7:2004+A1:2007, Portable fire extinguishers Part 7: Characteristics, performance requirements and test methods CEN/TR 15642, Unified tests procedures for the tests of EN
27、 3-7 EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) ISO/TR 8550 (all parts), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Co
28、py, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 5 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3-7:2004+A1:2007 and the following apply. 3.1 surveillance body inspection body third party, independent from the manufacturer 3.2 testing laboratory third pa
29、rty independent from the manufacturer 3.3 manufacturer legal entity that assembles and normally fills the fire extinguisher 3.4 sub contractor legal entity that undertakes on behalf of the manufacturer specific operations formally described in a sub-contract agreement 3.5 applicant legal entity, whi
30、ch assumes full product responsibility NOTE The applicant may also be the manufacturer. 3.6 EA accreditation of laboratories, inspection bodies and certification bodies by the European Co-operation for Accreditation NOTE The European Co-operation for Accreditation (EA) is the European network of nat
31、ionally recognised accreditation bodies based in the European geographical area and is acknowledged by the European Commission and EFTA by memorandum of understanding concerning co-operation (see www.european-accreditation.org ). 3.7 certification body impartial body, governmental or non-governmenta
32、l, possessing the necessary competence and responsibility to carry out certification of conformity according to given rules of procedure and management 4 Symbols and abbreviations For the purposes of this document, the following symbols and abbreviations apply. EA European Accreditation PED Pressure
33、 Equipment Directive (97/23/EC) QMS Quality Management System FPC Factory Production Control TDS Technical Data Sheet Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 6 5 Documentation for type testing and audits 5.1 I
34、dentification of the applicant The identification of the applicant shall be provided. 5.2 Identification of the manufacturer All locations directly controlled by the manufacturer and involved in the extinguishers manufacture shall be identified. 5.3 Identification of the extinguisher Identification
35、of the extinguisher shall contain: complete set of drawings in accordance clearly characterising the model; drawing shall enable each piece of pressure equipment and component to be identified; Technical Data Sheet (TDS) (see model in Annex B). 5.4 Documents provided with the extinguisher Documents
36、on storage, installation, use and maintenance instructions shall be provided. 5.5 Pressure Safety PED EC approval certificate(s) for fire extinguishers assembly covering both, type and production, from a PED notified body shall be provided. Clear link shall be made between EC type approval and the m
37、odel of extinguisher. 5.6 Quality Management System The Quality Management System documentation, if any, shall be provided NOTE Users of this document are advised to consider the desirability of accreditation in accordance with EN ISO 9001 delivered by an EA certification body or other Quality Manag
38、ement System (QMS) documentation giving an equivalent quality confidence. Equivalency is subjected to certification bodys appreciation. 5.7 Extinguishing media toxicological information Safety data sheet in accordance with European Directive 1907/2006/EC including its modifications shall be provided
39、. 6 Initial type testing The applicant shall make available to a testing laboratory for assessment to EN 3-7: a batch of 50 extinguishers from which the number of extinguishers necessary for the verification shall be taken; the extinguishers selected shall be regarded as prototypes; full documentati
40、on (drawings, technical file, etc.) of the extinguisher to be tested; a documentation relating to the extinguishing media; Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 7 a technical data sheet of the extinguisher t
41、o be tested in accordance with Annex B. NOTE Applicants are advised to consider the desirability of using a EA accredited laboratory, which is a third party independent from the manufacturer to perform tests in accordance with EN 3-7 and EA accredited in accordance with EN ISO/IEC 17025. The testing
42、 laboratory shall issue a laboratory test report in accordance with Annex C. For this, it shall carry out the complete listed tests and checks programme. Where unified test procedures exist according to CEN/TR 15642, they shall be used in the testing of the extinguisher. The laboratorys accreditatio
43、n shall take these procedures into consideration. 7 Factory Production Control (FPC) 7.1 Requirements The FPC system shall fulfil the requirements described in the following clauses, where applicable, which are taken from EN ISO 9001:2000. 4.2 (Documentation requirements), except 4.2.1 a). 5.1 e) (E
44、nsuring the availability of resources). 5.5.1 (Responsibility and authority). 5.5.2 (Management representative). 6 (Resource management). 7.1 (Planning of product realisation) except 7.1 a). 7.2.3 c) (Customer communication, information coming back from customers and customer complaints). 7.4 (Purch
45、asing). 7.5 (Production and service provision). 7.6 (Control of monitoring and measuring devices). 8.2.3 (Monitoring and measurement of processes). 8.2.4 (Monitoring and measurement of product). 8.3 (Control of non conforming product). 8.5.2 (Corrective action). The above requirements cover amongst
46、others: calibration, training, records, complaints and requirements of Clause 9. NOTE The FPC system can be part of a Quality Management System, e.g. in accordance with EN ISO 9001. Where a current EN ISO 9001 certified QMS is existing, it may be taken into consideration. Licensed Copy: Wang Bin, IS
47、O/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 8 7.2 Additional requirements a) Means for manufacturing extinguishers and/or extinguishers components shall be available; b) Means for performing the required controls shall be available and regu
48、larly calibrated; c) Product traceability records shall be available. 8 Reference numbering and marking Upon successful completion of all tests and controls, a reference number can be issued by an EA accredited certification body or a national ministry. This reference number shall be marked on the e
49、xtinguisher as described in EN 3-7:2004+A1:2007, 16.2. 9 Items to be regularly checked and recorded during production Items listed in Table 1 and Table 2 shall be regularly checked and recorded as a minimum: Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 13/10/2010 07:55, Uncontrolled Copy, (c) BSIBS EN 3-10:2009EN 3-10:2009 (E) 9 Table 1 Controls, tests and frequency I
