1、BSI Standards PublicationBS EN 3645-006:2015Aerospace series Connectors, electrical, circular,scoop-proof, triple startthreaded coupling, operatingtemperature 175 C or 200 CcontinuousPart 006: Protective cover for receptacle Product standardBS EN 3645-006:2015 BRITISH STANDARDNational forewordThis B
2、ritish Standard is the UK implementation of EN 3645-006:2015. It supersedes BS EN 3645-006:2006 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this c
3、ommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87962 3ICS 49.
4、060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 3645-006:2015EUR
5、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3645-006 April 2015 ICS 49.060 Supersedes EN 3645-006:2006English Version Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 006: Protective cover f
6、or receptacle - Product standard Srie arospatiale - Connecteurs lectriques circulaires contacts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu - Partie 006 : Bouchon de vol pour embase - Norme de produit Luft- und Raumfahrt - Elektrische Ru
7、ndsteckverbinder, kontaktgeschtzt, dreigngige Gewinde-Schnellkupplung, Betriebstemperatur 175 C oder 200 C konstant - Teil 006: Schutzkappe fr festen Steckverbinder - Produktnorm This European Standard was approved by CEN on 5 December 2014. CEN members are bound to comply with the CEN/CENELEC Inter
8、nal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any
9、CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ver
10、sions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
11、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploita
12、tion in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-006:2015 EBS EN 3645-006:2015Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics . 5 5 Designation 6 6 Marking . 7 7 Technical specification
13、. 7 EN 3645-006:2015 (E)BS EN 3645-006:2015Foreword This document (EN 3645-006:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
14、 received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Octo
15、ber 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent
16、 rights. This document supersedes EN 3645-006:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland
17、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 3645-006:2015 (E)BS EN 3645-006:
18、20151 Scope This European Standard specifies the characteristics of protective covers for receptacles in the family of circular electrical connectors with triple start threaded coupling. It applies to models in Table 2. For receptacles, see EN 3645-003, EN 3645-004, EN 3645-005, EN 3645-009 and EN 3
19、645-010 respectively. These connectors are derived from and interchangeable with models W, F, K and Z in MIL-DTL-38999/33. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,
20、 only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3645-001, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part
21、 001: Technical specification EN 3645-002, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3645-003, Aerospace series Connectors, electri
22、cal, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 003: Receptacle square flange mounting Product standard EN 3645-004, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature
23、175 C or 200 C continuous Part 004: Receptacle, hermetic, square flange mounting Product standard EN 3645-005, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 005: Receptacle, hermetic, round flange,
24、 brasage mounting Product standard EN 3645-009, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 009: Receptacle, round flange, jam nut mounting Product standard EN 3645-010, Aerospace series Connecto
25、rs, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting Product standard MIL-DTL-38999/33, Connector, electrical, circular, cover, protective, receptacle, series III, metric
26、1)3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3645-001 apply. 1) Published by: DoD National (US) Mil. Department of Defense. http:/www.defenselink.mil/ EN 3645-006:2015 (E)BS EN 3645-006:20154 Required characteristics 4.1 Dimensions and mass See F
27、igure 1 and Table 1. Dimensions and tolerances are in millimetres. Key 1 Attachment type with ring, see Table 4. 2 Internal thread A 3 Sealing gasket shall be bonded or mechanically retained in protective cover 4 Eyelet hole diameter 4,240,130,25+5 Attachment type with eyelet, see Table 4. 6 Milling
28、 or knurling 7 Fastener Stainless steel (chain or rope shall rotate freely on the fastener) Figure 1 Receptacle protective cover EN 3645-006:2015 (E)BS EN 3645-006:2015Table 1 Receptacle protective cover Dimensions Shell size A thread B C D E Mass g Internal thread Class 2B max. Internal diameter Di
29、ameter on side Diameter at thread end Models W, F and Z Model K min. max. min. max. min. max. max. max. min. min. max. Aluminium Stainless steel 09 14,71 14,96 15,21 15,46 15,97 16,38 23,00 27,00 17,64 18,00 21,00 11 33 11 17,88 18,14 18,38 18,64 19,15 19,55 28,00 32,00 21,97 18,50 22,50 13 37 13 21
30、,06 21,31 21,56 21,81 22,32 22,73 31,00 37,00 25,12 23,50 25,00 15 44 15 24,23 24,49 24,73 24,99 25,50 25,90 32,00 40,00 29,92 25,00 31,00 17 49 17 28,63 28,94 29,29 29,60 30,26 30,77 37,00 44,00 32,00 26,50 32,50 19 54 19 30,22 30,53 30,88 31,19 31,85 32,35 39,00 46,00 36,27 28,00 34,00 21 61 21 33
31、,40 33,70 34,06 34,36 35,02 35,53 42,00 49,00 38,25 30,00 35,50 25 72 23 36,57 36,88 37,23 37,54 38,20 38,70 45,00 54,00 42,62 31,50 37,50 27 76 25 39,75 40,05 40,41 40,71 41,37 41,88 49,00 56,00 44,45 33,00 39,00 30 87 4.2 Materials and surface treatment See Table 2. 4.3 Electrical, mechanical and
32、climatic characteristics See EN 3645-002. 5 Designation EXAMPLE Description block PROTECTIVE COVER ELECTRICAL CONNECTOR Identity block EN3645-W3A7 Number of the basic standard Model (see Table 2) Protective cover code for receptacle (see EN 3645-002) Shell size code (see Table 3) Type of attachment
33、(see Table 4) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. EN 3645-006:2015 (E)BS EN 3645-006:2015Table 2 Model coding Models Description W Protective cover for receptacle in cadmium-plated aluminium alloy, olive green Salt spray resistance
34、500 h Maximum operating temperature 175 C continuous. F Protective cover for receptacle in nickel-plated aluminium alloy Maximum operating temperature 200 C continuous. K Protective cover for receptacle in passivated corrosion resisting steel Maximum operating temperature 200 C continuous Z Protecti
35、ve cover for receptacle, zinc-nickel plated aluminium alloy Non-reflective black Maximum operating temperature 175 C continuous Table 3 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J Table 4 Type of attachment Attachment type Description 0 Stainless steel chain and eyel
36、et 1 Stainless steel rope with PTFE jacket and eyelet 2 Stainless steel rope with PTFE jacket and ring 7 Stainless steel chain and ring 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001. EN 3645-006:2015 (E)This page deliberately left blankThis page deliberately
37、left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Instit
38、ution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been careful
39、ly assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out m
40、ore about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copie
41、s can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further informa
42、tion on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards
43、developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standard
44、s when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With upd
45、ates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your busine
46、ss. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or
47、 entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a
48、 retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
