1、BRITISH STANDARDBS EN 3660-013:2008Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief Product standardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55
2、g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 3660-013:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 May 2008 BSI 2008ISBN 97
3、8 0 580 60578 9National forewordThis British Standard is the UK implementation of EN 3660-013:2008.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be
4、obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicat
5、ionDate CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3660-013April 2008ICS 49.060English VersionAerospace series - Cable outlet accessories for circular andrectangular electrical and optical connectors - Part 013: Cableoutlet, style A, straight, unsealed, with cable tie strain relief -P
6、roduct standardSrie arospatiale - Accessoires arrire pour connecteurscirculaires et rectangulaires lectriques et optiques - Partie013 : Raccord, type A, droit non tanche, avec tenue ducble par fretage - Norme de produitLuft- und Raumfahrt - Endgehuse fr elektrische undoptische Rund- und Rechteckstec
7、kverbinder - Teil 013:Endgehuse, Bauform A, gerade, nicht abgedichtet, mitArm fr Kabelbinder - ProduktnormThis European Standard was approved by CEN on 19 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanSta
8、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French
9、, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czec
10、h Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN
11、DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3660-013:2008: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3
12、Terms and definitions .4 4 Characteristics.4 5 Designation 10 6 Marking .11 7 Technical specification .11 BS EN 3660-013:20083 Foreword This document (EN 3660-013:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and v
13、otes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard,
14、 either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN
15、 and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Rep
16、ublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3660-013:20084 1 Scope This product standard
17、 defines a range of cable outlets, style A, for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : 65 C to 200 C Class W : 65 C to 175 C 2 Normative references The following referenced documents are indispensable for the application of t
18、his document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-*, Aerospace series Elements of electrical and optical connection Test methods. EN 3660-001, Aerospace series Cable ou
19、tlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification. EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards. AS85049, Connector accessorie
20、s, electrical general specification for. 1)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1, Figure 2 and Table 1. For spacer pad, see Figure 3. For interfa
21、ce dimensions, see 4.2. *All its parts quoted. 1) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001. BS EN 3660-013:20085 All dimensions in millimetres Key Key1 Teeth N (see Table 2) 2 Area for cable tie or lacing cord 3 Thread A 4 Marking (
22、see Clause 6) 5 Knurled, manufacturers option 1 Three off wire lock holes equi-spaced for 0,8 mm max. diameter wire Figure 1 Figure 2 Figure 3 Spacer pad BS EN 3660-013:20086 Table 1 B C aD E Radius F Shell size A Thread Class 2B max. 0,38 max. + 0,2 0 max. Mass max. Classes N and W Mass max. Spacer
23、pad inches mm mm mm mm mm g g 08 0.4375-28UNEF 16 2,1 6,70 4,5 10 0.5625-24UNEF 19 30 2,9 9,95 5,0 12 0.6875-24UNEF 22 31 3,8 12,85 6,5 14 0.8125-20UNEF 25 4,8 16,02 9,0 16 0.9375-20UNEF 29 36 5,7 19,20 10,0 18 1.0625-18UNEF 31 38 21,46 11,0 20 1.1875-18UNEF 35 41 7,1 24,63 13, 5 22 1.3125-18UNEF 38
24、 44 7,8 27,80 15,0 24 1.4375-18UNEF 41 6,29 47 8,8 30,90 18,5 0,65 a“C” dimension is taken when the coupling nut is pulled in forward position. 4.2 Interface dimensions 4.2.1 Associated connector See EN 3660-002. 4.2.2 Standard AS85049 interface See Figure 4, Figure 5 and Table 2. BS EN 3660-013:200
25、87 All dimensions in millimetres aAfter max. 5,4 mm from the root of the teeth, the cable outlets coupling nut must conform to the G diameter. Figure 4 Figure 5 Table 2 G H I J max. max. min. max. min. max. Shell size mm mm mm mm N Number of teeth 08 15,20 10,26 9,7 10,01 7,59 8,80 12 10 18,40 13,36
26、 12,9 13,16 10,85 12,00 16 12 21,60 16,54 15,8 16,33 13,79 14,94 20 14 24,80 19,51 19,0 19,30 16,92 18,06 24 16 28,00 22,68 22,1 22,48 20,09 21,23 28 18 31,00 25,58 24,9 25,30 22,78 23,93 32 20 34,20 28,88 28,0 28,68 25,96 27,10 36 22 37,40 31,93 31,2 31,65 29,13 30,26 40 24 40,60 35,10 34,4 34,82 3
27、2,21 33,34 44 4.3 Material and finish Cable outlet: Material/Finish Class N : Aluminium/Electroless nickel Material/Finish Class W : Aluminium/Olive drab cadmium plate Spacer: Fluorosilicone, colour green BS EN 3660-013:20088 4.4 Assembly torque These torque values are intended for installation use
28、only, see Table 3. Table 3 Shell size Torque Nm 0,5 08 10 12 14 16 18 4,5 20 22 24 9,0 4.5 Coupling thread strength torques These torque values are for test purposes, see EN 2591-420 and Table 4. Table 4 Shell size Torque Nm 0,5 08 10 12 14 16 18 5,5 20 22 24 11,0 4.6 Tests Test details to be in acc
29、ordance with Table 5 and EN 3660-001. Qualification to be in accordance with EN 3660-001. BS EN 3660-013:20089 Table 5 EN 2591- Test No. Title Not applicable Applicable see EN 3660-001 Particulars 101 Visual examination X 102 Examination of dimensions and mass X See 4.1. 205 Housing (shell) electric
30、al continuity X 212 Surface transfer impedance (from 100 MHz to 1 GHz) aX 301 Endurance at temperature X 305 Rapid change of temperature X 306 Mould growth X For variant A only 307 Salt mist X Cable outlet not fitted to a connector and suspended with non-metallic cord. Duration: Class N 48 h Class W
31、 500 h 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X For variant A only 316 Ozone resistance X 317 Flammability X For variant A only 318 Fire-resistance X 402 Shock X Method A. Severity 100 g Number of shocks: 4 One in each direction in 2 perpendicular axes 403 Sinus
32、oidal and random vibration X Method B. Figure 3 and Table 2. Level J Duration: 8 h at ambient temperature 406 Mechanical endurance X 408 Mating and unmating forces X continued BS EN 3660-013:200810 Table 5 (concluded) EN 2591- Test No. Title Not applicable Applicable see EN 3660-001 Particulars Phas
33、e A Shell size Load N max. 08 10 12 44,5 14 16 18 89,0 20 22 133,5 24 156 420 Mechanical strength of rear accessories X Phase D and Table 4 422 Locking wire hole strength X 513 Magnetic permeability X Not fitted to a connector. Max. value Classes N and W 2,0 a1 GHz to 10 GHz under consideration. 5 D
34、esignation EXAMPLE EN3660-013N08A Cable outlet, style A, aluminium, electroless nickel, shell size 08, with spacer pad. Description block CABLE OUTLET Identity block EN3660-013N08A Number of this standard Material/Finish class, see 4.3 Shell size Variant A with spacer pad NOTE 1 No gaps are required
35、 between sections in the part number when printed. NOTE 2 If necessary, the code I9005 shall be placed between the description block and the identity block. BS EN 3660-013:200811 6 Marking Refer to EN 3660-001 and Figure 1. 7 Technical specification Refer to EN 3660-001. BS EN 3660-013:2008BS EN 366
36、0-013:2008BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standa
37、rds are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using t
38、his British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automa
39、tically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at
40、http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and internatio
41、nal standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subsc
42、ribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information
43、 regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the i
44、nternational standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.
45、This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
