1、Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectorsPart 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standardBS EN 3660-032:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/
2、2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-032 September 2017 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded
3、, sealed - Product standard Srie Arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 032 : Raccord, type K, droit, blind, tanche, pour manchon thermortractable - Norme de produit Luft- und Raumfahrt - Endgehuse fr elektrische und optische R
4、und- und Rechtecksteckverbinder - Teil 032: Endgehuse, Bauform K, gerade, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd - Produktnorm This European Standard was approved by CEN on 17 April 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whic
5、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eur
6、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members a
7、re the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, R
8、omania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any
9、form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-032:2017 ENational forewordThis British Standard is the UK implementation of EN 3660-032:2017.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre
10、 optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Publi
11、shed by BSI Standards Limited 2017ISBN 978 0 580 96939 3ICS 49.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued
12、since publicationDate Text affectedBRITISH STANDARDBS EN 3660032:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3660-032 September 2017 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable ou
13、tlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard Srie Arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 032 : Raccord, type K, droit, blind, tanche, pour manchon thermortractable - Norme de produit Lu
14、ft- und Raumfahrt - Endgehuse fr elektrische und optische Rund- und Rechtecksteckverbinder - Teil 032: Endgehuse, Bauform K, gerade, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd - Produktnorm This European Standard was approved by CEN on 17 April 2017. CEN members are bou
15、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C
16、EN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre
17、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
18、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17,
19、B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-032:2017 EBS EN 3660032:2017EN 3660-032:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 5 4 Chara
20、cteristics . 5 5 Designation. 19 6 Marking 19 7 Technical specification . 19 BS EN 3660032:2017EN 3660-032:2017 (E) 3 European foreword This document (EN 3660-032:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and v
21、otes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard,
22、 either by publication of an identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN sha
23、ll not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Den
24、mark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN
25、 3660032:2017EN 3660-032:2017 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, straight, shielded, sealed for heat shrinkable boot, for use with memory metal rings under the following conditions. The mating connectors are listed in EN 3660-002. Temperature range, Class
26、 N : 65 C to 200 C Class K : 65 C to 200 C Class W : 65 C to 175 C Class T : 65 C to 175 C (Nickel PTFE plating) Class Z : 65 C to 175 C (Zinc nickel plating) Associated electrical accessories : EN 3660-034 memory metal rings (for shield termination backshells). These cable outlets are designed for
27、termination of overall shielding braid or individual cable shields. They accommodate/permit the termination of heat shrinkable boots. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated
28、references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 2997 (all parts), Connectors, electrica
29、l, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical speci
30、fication EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards EN 3660-034, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 034: Memory m
31、etal rings, style Z, for the attachment of screens Product standard*All its parts quoted in this European Standard. BS EN 3660032:2017EN 3660-032:2017 (E) 5 AS85049, Connector accessories, electrical general specification for-1)IEC 60529, Degrees of protection provided by enclosures (IP code) A-A-59
32、569, Braid, wire (copper, tin-coated, silver-coated, or nickel coated, tubular or flat) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figures 1, 2 and 3 and Table
33、s 1, 2, 3 and 4. For cable entry dimensions, see 4.2. All dimensions are in millimetres. 1) Published by: SAE National (US) Society of Automotive Engineers. http:/www.sae.org/ BS EN 3660032:2017EN 3660-032:2017 (E) 6 Key 1 Thread C 2 EN 3660-034 memory metal ring 3 Marking 4 Three equally spaced hol
34、es 1 mm diameter for locking wire 5 Straight knurl, pitch manufacturers option Cable outlets may be manufactured as cast, fabricated or machined (manufacturers option). No sharp edges/burrs permissible on internal surfaces/joints. Surface finish of on all internal surfaces. Figure 1 Cable outlet 1,6
35、 nullm max. BS EN 3660032:2017EN 3660-032:2017 (E) 7 Table 1 Fixed dimensions of shell Dimensions in millimetres Shell size Entry size Cable dia. (ref) C Thread B D E max. max. max. min. max. 08 04 5,4 0,500-20UNEF 19,1 5,85 14,5 10 06 8,1 0,625-24UNEF 21,6 9,02 14,5 12 08 10,8 0,750-20UNEF 25,4 12,
36、20 14,5 14 08 10,8 0,875-20UNEF 29,2 12,20 14,5 16 10 13,5 1,000-20UNEF 31,8 15,37 14,5 18 12 16,2 1,062-18UNEF 35,6 18,55 14,5 20 14 18,9 1,188-18UNEF 38,1 21,73 14,5 22 16 21,6 1,312-18UNEF 41,9 24,90 14,5 24 18 24,3 1,438-18UNEF 44,5 28,70 14,5 Table 2 Mass for classes K, N, W, T and Z Mass in gr
37、ams Shell size code End-fitting size code Classes 04 05 06 07 08 10 12 14 16 18 20 08 6,85 N, T, W, Z 19,00 K 10 8,20 8,60 9,10 N, T, W, Z 22,75 23,85 25,25 K 12 9,60 10,40 11,10 N, W, Z, 26,60 28,85 30,75 K 14 11,20 11,80 12,50 N, T, W, Z 31,10 32,70 34,65 K 16 12,70 13,75 14,60 N, T, W, Z 35,20 38
38、,10 40,45 K 18 14,50 14,90 15,70 N, T, W, Z 40,20 41,30 43,50 K 20 19,70 20,20 20,65 N, T, W, Z 54,60 56,00 57,25 K 22 22,70 22,90 23,15 N, T, W, Z 62,90 63,50 64,15 K 24 25,45 25,65 25,60 N, T, W, Z 67,75 71,10 71,00 K BS EN 3660032:2017EN 3660-032:2017 (E) 8 4.2 Cable entry dimensions See Figure 2
39、 and Table 3. Section A-A Key 1 See detail section A-A for surface dimensions Figure 2 Cable entry BS EN 3660032:2017EN 3660-032:2017 (E) 9 Table 3 Dimensions in millimetres Cable outlet code A B C D + 0,25 0,5 min. max. 0,5 + 0,2 0 04 6,4 9,39 9,56 14,0 1,12 05 7,9 10,97 11,13 15,5 1,12 06 9,5 12,5
40、7 12,73 17,1 1,12 07 11,1 14,12 14,31 18,7 1,12 08 12,7 15,72 15,91 20,3 1,12 10 15,9 18,84 19,11 23,5 1,12 12 19,1 22,02 22,28 26,7 1,75 14 22,2 25,17 25,46 29,8 1,75 16 25,4 28,34 28,63 33,0 1,75 18 28,6 31,52 31,81 36,2 1,75 20 31,8 34,69 34,98 39,4 1,75 NOTE The cable outlet shall be selected in
41、 accordance with the maximum diameter of the cable bundle, see Table 1. 4.3 Associated connectors See EN 3660-002. BS EN 3660032:2017EN 3660-032:2017 (E) 10 4.4 Standard AS85049 interface See Figure 3 and Table 4. All dimensions are in millimetres. Detail AA (Less accessory nut) Detail B (Less acces
42、sory nut) Detail B (Less accessory nut) Optional for accessories made from stainless material Key 1 Root of tooth on centreline within 2 (applicable to angle accessories only) 2 Thread 3 Depth of teeth 4 Start of angle 5 Before radius NOTE 1 Minimum penetration of “Z“ diameter measured from front of
43、 teeth. NOTE 2 The first tread must be chamfered. NOTE 3 Dimensions are in millimetres. NOTE 4 Angle, manufacturing option to meet performance requirements. a See Note 1. bSee Note 4. Figure 3 BS EN 3660032:2017EN 3660-032:2017 (E) 11 Table 4 Dimensions in millimetres Shell size W X Y Z N Number of
44、teeth + 0,25 0 0 0,38 + 0,38 0 0 0,25 08 12,70 9,14 7,59 6,86 12 10 15,88 12,55 11,00 9,53 15 12 19,05 15,49 13,94 12,98 21 14 22,23 18,67 17,12 14,86 24 16 25,40 21,84 20,29 18,03 30 18 26,97 23,27 22,07 20,04 33 20 30,17 26,44 25,25 23,22 36 22 33,32 29,62 28,42 26,39 39 24 36,53 32,79 31,60 29,31
45、 42 4.5 Material and finish Material/Finish Class N : Aluminium/Nickel plated Material/Finish Class K : Stainless steel/Passivated Material/Finish Class W : Aluminium/Olive drab cadmium plated Material/Finish Class T : Aluminium (Nickel PTFE plated) Material/Finish Class Z : Aluminium (Zinc nickel p
46、lated) BS EN 3660032:2017EN 3660-032:2017 (E) 12 4.6 Assembly torque These torque values are intended for installation use only, see Table 5. Table 5 Shell size Assembly torque max. Nm Class K Classes N, T, W and Z 08 6,3 6,3 10 8,6 8,6 12 12,2 12,2 14 13,1 13,1 16 13,1 13,1 18 13,1 13,1 20 15,4 15,
47、4 22 15,4 15,4 24 15,4 15,4 4.7 Tests Tests according to EN 2591-100 Test details to be in accordance with Table 6, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. BS EN 3660032:2017EN 3660-032:2017 (E) 13 Table 6 Tests (1 of 5) EN 2591- Designation on the test Not a
48、pplicable Applicable see EN 3660-001 Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1 and 4.2. 205 Housing (shell) electrical continuity X Cable outlet connector connection. Measured from connector, through backshell to braid. Class N : 5 m Class W : 10 m Class K : 20 m Class T : 10 m Class Z : 10 m 212 Surface transfer impedance (from 100 MHz to 1 GHz) a X Frequency Zt (m) MHz Class N Classes T, W and Z Class K 0,1 5 10 20 1 5 1
