1、BRITISH STANDARD BS EN 382-1:1993 Fibreboards Determination of surface absorption Part 1: Test method for dry process fibreboards The European Standard EN 382-1:1993 has the status of a British Standard UDC 674.03:674.815:620.179.111.5BSEN 382-1:1993 This British Standard, having been prepared under
2、 the directionof the Technical SectorBoard for Building and Civil Engineering (B/-), was publishedunder the authority ofthe Standards Board and comes into effect on 15April1993 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference B/541 Draft for comment 9
3、0/15589 DC ISBN 0 580 21126 6 Cooperating organizations The European Committee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: Austria Oesterreichisches Normungsinstitut Belgium Institu
4、t belge de normalisation Denmark Dansk Standardiseringsraad Finland Suomen Standardisoimisliito, r.y. France Association franaise de normalisation Germany Deutsches Institut fr Normung e.V. Greece Hellenic Organization for Standardization Iceland Technological Institute of Iceland Ireland National S
5、tandards Authority of Ireland Italy Ente Nazionale Italiano di Unificazione Luxembourg Inspection du Travail et des Mines Netherlands Nederlands Normalisatie-instituut Norway Norges Standardiseringsforbund Portugal Instituto Portugus da Qualidade Spain Asociacin Espaola de Normalizacin y Certificaci
6、n Sweden Standardiseringskommissionen i Sverige Switzerland Association suisse de normalisation United Kingdom British Standards Institution Amendments issued since publication Amd. No. Date CommentsBSEN 382-1:1993 BSI 08-1999 i Contents Page Cooperating organizations Inside front cover National for
7、eword ii Foreword 2 Text of EN 382-1 3 National annex NA (informative) Committees responsible Inside back cover National annex NB (informative) Cross-references Inside back coverBSEN 382-1:1993 ii BSI 08-1999 National foreword This British Standard has been prepared under the direction of the Techni
8、cal Sector Board for Building and Civil Engineering and is the English language version of EN382-1:1993 Fibreboards Determination of surface absorption Part 1: Test method for dry process fibreboards, published by the European Committee of Standardization (CEN). EN 382-1 was produced as a result of
9、international discussion in which the UK took an active part. The principle of the method is technically equivalent to A.18 of BS1142:1989 Specification for fibre building boards, which will be withdrawn in due course. A British Standard does not purport to include all the necessary provisions of a
10、contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 t
11、o 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 382-1 February 1993 UDC 674.03.674.81
12、5:620.179:111.5 Descriptors: Fibreboards, surface absorption, test method, dry process English version Fibreboards Determination of surface absorption Part 1: Test method for dry process fibreboards Panneaux de fibres de bois Dtermination de labsorption de surface Partie 1: Mthode dessai pour pannea
13、ux de fibres obtenus par procd sec Faserplatten Bestimmung der Oberflchen-Absorption Teil 1: Prfmethode fr Faserplatten nach dem Trockenverfahren This European Standard was approved by CEN on 1992-12-15. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
14、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in thr
15、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Au
16、stria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat:
17、rue de Stassart 36, B-1050 Brussels 1993 Copyright reserved to CEN members Ref. No. EN 382-1:1993 EEN382-1:1993 BSI 08-1999 2 Foreword This European Standard was prepared by Working Group3 “Fibreboards” (Secretariat: Italy) of Technical Committee CEN/TC 112 “Wood-based panels” (Secretariat: Germany)
18、. This standard is one of a series specifying methods of test for determining the properties of fibreboards. No existing European Standard is superseded. This European Standard shall be given the status of national standard, either by publication of an identical text or by endorsement, at the latest
19、 by August1993, and conflicting national standards shall be withdrawn at the latest by December1994. In accordance with the Common CEN/CENELEC Rules, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
20、Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Principle 3 4 Apparatus 3 5 Test pieces 3 6 Procedure 4 7 Expression of results 4 8 Test report 4 Annex A (informative) Bibliography 5 Figure
21、 1 Determination of surface absorption of dry process fibreboards (principle) 3EN382-1:1993 BSI 08-1999 3 1 Scope This European Standard specifies a method of determining the surface absorption of dry process fibreboards. 2 Normative references This European Standard incorporates by dated or undated
22、 reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when inc
23、orporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 324-1, Wood-based panels Determination of dimensions of boards Part 1: Determination of thickness, width and length. EN 326-1, Wood-based panels Sampling, cutting and inspec
24、tion Part 1: Sampling and cutting of test pieces and expression of test results 1) . ISO 835-2, Laboratory glassware Graduated pipettes Part 2: Pipettes for which no waiting time is specified. 3 Principle The surface absorption of dry process fibreboards is determined by letting a drop of toluene ru
25、n down the surface of a test piece and measuring the length of the stain. 4 Apparatus 4.1 Support Support against which the test pieces can be leaned at an angle of (60 5) (Figure 1). 4.2 Graduated pipette Class A type 2 graduated pipette according to ISO835-2 with a nominal capacity of2ml, and a ri
26、gid fixture to position the pipette. 4.3 Toluene Toluene of analytical grade. 4.4 Measuring tape Measuring tape, according to EN324-1. 5 Test pieces 5.1 Sampling Sampling and cutting of the test pieces shall be carried out according to EN326-1. From each board three test pieces shall be taken. 5.2 D
27、imensions The dimensions of the test pieces are(300 2)mm (100 2)mm board thickness. The longer dimension shall be in the direction of sanding. 5.3 Conditioning The test pieces shall be conditioned to constant mass in an atmosphere with a mean relative humidity of (65 5)% and a temperature of(20 2) C
28、. Constant mass is considered to be reached when the results of two successive weighing operations, carried out at an interval of24h, do not differ by more than0,1% of the mass of the test piece. 1) At present at the draft stage Figure 1 Determination of surface absorption of dry process fibreboards
29、 (principle)EN382-1:1993 4 BSI 08-1999 6 Procedure 6.1 Positioning Position the test piece on the support at an inclination of (60 5) , with the sanding direction pointing downwards. Position the pipette on its fixture at (90 5) to and at a distance of(1 0,1)mm from the face of the test piece. 6.2 D
30、ischarge of the toluene Discharge 1ml of toluene, having a temperature of (20 2) C, from the pipette onto the face of the test piece, within (4 2)s. Allow the toluene to run freely down the inclined surface of the test piece. For boards with two smooth surfaces, both faces shall be tested. The test
31、shall be carried out inside a fume cupboard. 6.3 Measurement Measure the maximum length of the stain caused by the toluene, along a line parallel to the edges of the test piece, with an accuracy of 1 millimetre. 7 Expression of results 7.1 For a test piece The surface absorption of a test piece is e
32、xpressed as the length of the stain caused by the toluene, to the nearest millimetre. When testing boards with two smooth surfaces, the lower of these two values shall be taken. 7.2 For a board The surface absorption of a board is the arithmetic mean of the results of all test pieces taken from that
33、 board, expressed to1mm. 8 Test report According to EN 326-1.EN382-1:1993 BSI 08-1999 5 Annex A (informative) Bibliography EN 316, Wood fibreboards Definition, classification and symbols. 6 blankBSEN382-1:1993 BSI 08-1999 National annex NA (informative) Committees responsible The United Kingdom part
34、icipation in the preparation of this European Standard was entrusted by the Technical Sector Board for Building and Civil Engineering (B/-) to Technical Committee B/541, upon which the following bodies were represented: American Plywood Association Association of British Plywood and Veneer Manufactu
35、rers British Woodworking Federation Chartered Institute of Building Coordinator for Timber and Timber Products Council of the Forest Industries of British Columbia Department of the Environment (Timber Division, Building Research Establishment) Fibre Building Board Organisation (FIDOR) Finnish Plywo
36、od International Flat Roofing Contractors Advisory Board Forestry Commission Furniture Industry Research Association Institution of Structural Engineers National Federation of Roofing Contractors National Housebuilding Council National Panel Products Association Royal Institute of British Architects
37、 Timber Research and Development Association Timber Trade Federation United Kingdom and Ireland Particleboard Association Coopted member National annex NB (informative) Cross-references Publication referred to Corresponding British Standard EN 324-1:1993 BS EN 324 Wood-based panels Determination of
38、dimensions of boards Part 1:1993 Determination of thickness, width and length ISO 835-2:1981 BS 700 Graduated pipettes Part 2:1982 Specification for pipettes for which no waiting time is specifiedBS EN 382-1:1993 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the inde
39、pendent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they
40、possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the iden
41、tity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign
42、standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on st
43、andards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Informat
44、ion Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001.
45、Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitt
46、ed in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
