1、BRITISH STANDARDBS EN 40-4:2005Lighting columns Part 4: Requirements for reinforced and prestressed concrete lighting columnsThe European Standard EN 40-4:2005 has the status of a British StandardICS 93.080.40g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g5
2、0g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIBS EN 40-4:2005This British Standard was published under the authority of the Standards Policy and Strateg
3、y Committee on 16 January 2006 BSI 16 January 2006ISBN 0 580 47002 4National forewordThis British Standard is the official English language version of EN 40-4:2005. It supersedes BS 5649-9:1982 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee B/509, Roa
4、d equipment, to Subcommittee B/509/50, Street lighting columns, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred
5、to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions
6、of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or pr
7、oposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 28, an inside back cover and a back cover.The BSI copy
8、right notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 40-4December 2005ICS 93.
9、080.40 Supersedes EN 40-4:1982 English VersionLighting columns - Part 4: Requirements for reinforced andprestressed concrete lighting columnsCandlabres dclairage public - Partie 4: Prescriptionspour les candlabres dclairage public en bton arm eten bton prcontraintLichtmaste - Teil 4: Anforderungen a
10、n Lichtmaste ausStahl- und SpannbetonThis European Standard was approved by CEN on 27 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to
11、-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the
12、 responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ir
13、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050
14、Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 40-4:2005: ELicensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEN 40-4:2005 (E) 2 Contents Page Foreword 3 1 Scope. 5 2 Normative referen
15、ces. 5 3 Terms and definitions 5 4 Materials 6 5 Geometrical properties 6 6 Design and design verification 6 7 Construction and properties 7 8 Protection against mechanical impact8 9 Apertures and cable ways . 9 10 Marking and labelling. 9 11 Technical documentation 9 12 Conformity control . 10 Tabl
16、e 1 Control sample size related to lot size. 11 Figure 1 Steel gauge for verifying straightness . 12 13 Test parameters 13 14 Performance under vehicle impact passive safety . 13 Annex A (normative) Concrete cover 14 Table A.1 Minimum concrete cover. 14 Annex B (normative) Inspection scheme . 15 Tab
17、le B.1 Finished product inspection . 15 Annex C (normative) Initial type tests. 16 Annex Y (informative) Choice of CE marking method. 16 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of the EU Construction Products Directive 18 Table Z
18、A.1 Relevant clauses 19 Table ZA.2 System of attestation of conformity . 20 Table ZA.3 Assignment of evaluation of conformity tasks for concrete lighting columns under system 1 . 20 Figure ZA.1 Example of simplified label . 23 Figure ZA.2 Example of CE marking with Method 1.24 Figure ZA.3 Example of
19、 CE marking with Method 2 (verification by calculation) 25 Figure ZA.4 Example of CE marking with Method 2 (verification by testing). 26 Figure ZA.5 Example of CE marking with Method 3.27 Bibliography 28 Licensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEN 40-4:200
20、5 (E) 3 Foreword This document (EN 40-4:2005) has been prepared by Technical Committee CEN/TC 50 “Lighting columns and spigots”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsem
21、ent, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by August 2007. This document supersedes EN 40-4:1982. This document has been prepared under Mandate M/111 “Circulation fixtures” given to CEN by the European Commission and the European Free Trade A
22、ssociation and supports essential requirements of the EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC see informative Annex ZA, which is an integral part of this document. For common aspects reference is made to EN 13369:2004, Common rules for precast products, from which also
23、 the relevant requirements of the EN 206-1:2000, Concrete Part 1: Specification, performances, production and conformity are taken. The references to EN 13369:2004 by precast concrete product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. This docum
24、ent defines in Annex ZA the application methods of CE marking to products designed using the relevant Eurocodes (normally EN 1992-1-1:2004 and EN 1992-1-2). Where, in default of applicability conditions of Eurocodes to the works of destination, design provisions other than Eurocodes are used for mec
25、hanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3.5. This document is the fourth in a series relating to specifications for “Lighting columns”. At present the Parts of this standard are as follows: Part 1: Definitions and terms Part 2: G
26、eneral requirements and dimensions Part 3: Design and verification 3-1: Specification for characteristic loads 3-2: Verification by testing 3-3: Verification by calculation Part 4: Requirements for reinforced and prestressed concrete lighting Part 5: Requirements for steel lighting columns Part 6: R
27、equirements for aluminium lighting columns Part 7: Requirements for fibre reinforced polymer composite lighting columns Licensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEN 40-4:2005 (E) 4 According to the CEN/CENELEC Internal Regulations, the national standards or
28、ganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
29、 Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEN 40-4:2005 (E) 5 1 Scope This document specifies requirements for reinforced and prestressed concrete lighting columns. It applies to columns not exceeding
30、 20 m height for post top lanterns and columns with brackets not exceeding 18 m height for side entry lanterns. This document specifies: a) performance related to the essential requirement of resistance to horizontal (wind) loads, measured in accordance with EN 40-3; b) performance under vehicle imp
31、act (passive safety) in support of the Essential Requirement No. 4 Safety in use, measured in accordance with the corresponding test methods included in this document or available in separate European Standards. 2 Normative references The following referenced documents are indispensable for the appl
32、ication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 40-1:1991, Lighting columns Part 1: Definitions and terms EN 40-2:2004, Lighting columns Part 2: General requir
33、ements and dimensions EN 40-3-1, Lighting columns Part 3-1: Design and verification Specification for characteristic loads EN 40-3-2, Lighting columns Part 3-2: Design and verification Verification by testing EN 40-3-3, Lighting columns Part 3-3: Design and verification Verification by calculation E
34、N 1992-1-1:2004, Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings EN 10204, Metallic products Types of inspection documents EN 12390-5, Testing hardened concrete Part 5: Flexural strength of test specimens EN 12767, Passive safety of support structures for ro
35、ad equipment Requirements and test methods EN 13369:2004, Common rules for precast concrete products EN 62262, Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 3 Terms and definitions For the purposes of this document, the terms and
36、definitions given in EN 40-1:1991, EN 1992-1-1:2004, EN 13369:2004 and the following apply. 3.1 spun concrete concrete compacted by pressure and vibration using a rotating mould (centrifugal force) Licensed Copy: Wang Bin, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEN 40-4:2005 (E)
37、6 3.2 product family number of lighting columns, for the purposes of testing and/or calculation (including ITT and FPC testing), where the manufacturer can demonstrate that the results for a characteristic from any one product in the family are representative for all other lighting columns within th
38、at same family. A product may be in different families for different characteristics. NOTE At the plenary meeting of CEN/TC 50 on 5thOctober 2004 the above definition of product family was agreed. It was also agreed that it should be added to EN 40-1 on next revision. As it is not in the current ver
39、sion of EN 40-1, it is repeated above. 4 Materials Materials shall conform to EN 13369:2004, 4.1. 5 Geometrical properties 5.1 General Product dimensions shall conform to EN 40-2 and where applicable defined on the basis of the specific design and calculations. 5.2 Production tolerances Production t
40、olerances shall conform to EN 40-2, the total length being measured from ground level. Dimensions shall be measured in accordance with 13.2.2. The tolerance on column mass shall be 10 %. 6 Design and design verification The column shall be designed to safely sustain the dead loads and the wind loads
41、 specified in EN 40-3-1, and shall be verified in accordance with one of the following methods: a) Clauses 7.1 and 12.2.2 b) Compliance with 7.1 and EN 13369 (for common rules), and the following: geometrical data (main dimensions and main cross sections, including tolerances) of the lighting column
42、 as Clause 5 and 7.5; and properties of the materials and constituents products used that are needed to determine, according to the national provisions valid in the place of use, or possible use, the resistance to horizontal loads. c) Compliance with the purchasers specific design It may be assumed
43、by the manufacturer that where he is requested to produce the lighting column following the provisions of the clients specific design details supplied by the purchaser, such provisions are compliant with requirements for regulatory marking in the place of intended destination. Licensed Copy: Wang Bi
44、n, na, Tue Apr 11 02:10:29 BST 2006, Uncontrolled Copy, (c) BSIEN 40-4:2005 (E) 7 7 Construction and properties 7.1 Concrete The production of concrete shall conform to EN 13369:2004, 4.2. The concrete used for reinforced concrete columns must conform to compressive strength class C 30/37 or higher
45、in accordance with EN 206-1. The concrete used for prestressed concrete lighting columns shall conform to compressive strength class C 35/45 or higher. 7.2 Surface characteristics When determined in accordance with 13.2.1, the surface of the column shall be free from damage that may adversely affect
46、 its structural integrity or reduce its durability. In the absence of regulatory requirements or specifications to the contrary, blemishes or surface irregularities are admissible, but shall be limited to: a) diameter 25 mm; b) depth 5 mm providing the cover is not reduced below the minimum values s
47、pecified in 7.3. The maximum crack width caused by shrinkage or temperature in the cement rich layer shall not exceed 0,2 mm. The finishing of the surface shall be considered acceptable providing that the requirements of this document are not adversely affected. 7.3 Durability and cover to reinforce
48、ment The requirements for durability shall be in accordance with EN 13369:2004, 4.3.7. For products with a design working life not exceeding 30 years, Annex A shall apply. 7.4 Dangerous substances Materials used in products shall not release any dangerous substances in excess of the maximum permitte
49、d levels specified in a relevant European Standard for the material. NOTE Attention is drawn to the maximum permitted levels of dangerous substances as governed by national regulations of the Member State of destination. 7.5 Detailing 7.5.1 Spacing of bars Where verified by testing in accordance with EN 40-3-2, the minimum space between individual bars and/or external parts of bundles of reinforcing material shall be at least: a) with respect to casting: the maximum aggregate size; b) with respect to anc
