1、BSI Standards PublicationBS EN 4165-026:2015Aerospace series Connectors, electrical,r e c t a n g u l a r , m o d u l a r Operating temperature 175 CcontinuousPart 026: Accessories for single moduleconnector Product standardBS EN 4165-026:2015 BRITISH STANDARDNational forewordThis British Standard i
2、s the UK implementation of EN 4165-026:2015.It supersedes BS EN 4165-026:2011 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtai
3、ned on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 89604 0ICS 49.060Compliance with a Br
4、itish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4165-026:2015EUROPEAN STANDARD NORME E
5、UROPENNE EUROPISCHE NORM EN 4165-026 November 2015 ICS 49.060 Supersedes EN 4165-026:2011English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C continuous - Part 026: Accessories for single module connector - Product standard Srie arospatiale -
6、Connecteurs lectriques rectangulaires modulaires - Temprature dutilisation 175 C continu - Partie 026 : Accessoires pour connecteur mono-module - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 026: Endgehuse
7、 fr Steckverbinder fr Einzelmodule - Produktnorm This European Standard was approved by CEN on 8 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterat
8、ion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made b
9、y translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
10、 Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDI
11、ZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-026:2015 EBS EN 4165-026:2015EN 4165-02
12、6:2015 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 5 5 Designation. 15 6 Marking 15 7 Technical specification . 15 BS EN 4165-026:2015EN 4165-026:2015 (E) 3 European foreword This document (EN 4165-026:2015) has
13、been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of
14、 the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May
15、 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4165-026:2011. According to the CEN-CENELEC Interna
16、l Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel
17、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4165-026:2015EN 4165-026:2015 (E) 4 1 Scope This European Standard defines accessories of single modules connectors a
18、ccording to EN 4165-024 and EN 4165-025 used in the family of rectangular electrical connectors. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited ap
19、plies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products prEN 3660-033, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 033: S
20、tainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets. Product standard EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace seri
21、es Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 4165-024, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 024: Single module plug Produc
22、t standard EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product Standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. BS EN 4165-026:20
23、15EN 4165-026:2015 (E) 5 4 Required characteristics 4.1 Shielded accessories for single module connector See attachment principle on Figure 1. Always delivered with attachment system. NOTE No accessory is standardized to fit the single-module connectors with contact size 8 module (according to EN 41
24、65-002) a new accessory must be required for standardization if specific need exists. Alternative design: Key 1 accessory attachment system consisting of half clips 2 accessory system consisting of two half sections permitting the termination of shielding using prEN 3660-033 banding strap or equival
25、ent In case of 45 and 90 accessories, numbering system permit to give indication of angular position of the accessory. Figure 1 Accessory assembly BS EN 4165-026:2015EN 4165-026:2015 (E) 6 See Figure 2. Dimensions are in millimetres Detail X (in larger scale) Detail Y (in larger scale) Figure 2 Acce
26、ssory attachment system BS EN 4165-026:2015EN 4165-026:2015 (E) 7 4.1.1 Straight accessory Without type code See Figure 3. Dimensions are in millimetres Mass: 5,6 g max. Figure 3 Straight accessory BS EN 4165-026:2015EN 4165-026:2015 (E) 8 4.1.2 Straight accessory with cable tie device Type code A S
27、ee Figure 4. Dimensions are in millimetres Mass: 5,7 g max. Figure 4 Straight accessory with cable tie device BS EN 4165-026:2015EN 4165-026:2015 (E) 9 4.1.3 Accessory with angle of 45 Without type code See Figure 5. Dimensions are in millimetres Mass: 7,5 g max. Key 1 see Note. NOTE Angular positio
28、n indication (0 to 7). Figure 5 Accessory with angle of 45 BS EN 4165-026:2015EN 4165-026:2015 (E) 10 4.1.4 Accessory with angle of 45 and cable tie device Type code A See Figure 6. Dimensions are in millimetres Mass: 7,5 g max. F view Key 1 see Note. NOTE Angular position indication (0 to 7). Figur
29、e 6 Accessory with angle of 45 and cable tie device BS EN 4165-026:2015EN 4165-026:2015 (E) 11 4.1.5 Accessory with angle of 90 Without type code See Figure 7. Dimensions are in millimetres Mass: 9,0 g max. Key 1 angular position indication (0 to 7) Figure 7 Accessory with angle of 90 BS EN 4165-026
30、:2015EN 4165-026:2015 (E) 12 4.1.6 Accessory with angle of 90 and cable tie device Type code A See Figure 8. Dimensions are in millimetres Mass: 9,0 g max. Key 1 see Note. NOTE Angular position indication (0 to 7) Figure 8 Accessory with angle of 90 and cable tie device BS EN 4165-026:2015EN 4165-02
31、6:2015 (E) 13 4.2 Unplated composite accessories for single module connector 4.2.1 Accessory with universal angle Type code C See Figure 9. Dimensions are in millimetres Mass: 2,2 g max. Figure 9 Accessory with universal angle BS EN 4165-026:2015EN 4165-026:2015 (E) 14 4.2.2 Accessory with universal
32、 angle Type code D See Figure 10. Dimensions are in millimetres Mass: 2,2 g max. Figure 10 Accessory with universal angle BS EN 4165-026:2015EN 4165-026:2015 (E) 15 4.3 Class See Table 1. Table 1 Materials and surface treatment Material code Material Surface treatment Resistance to salt mist Operati
33、ng temperature (continuous) M Receptacle with housing (shell): Composite Nickel plated, conducting finish 500 h 175 C C Composite none na 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR ACCESSORIES Identity block EN4165M10A Number of the basic standard Classes type, see 4.3 M = composit
34、e nickel plated Orientation model: 10: Straight, see 4.1.1 and 4.1.2 20: 45 angle, see 4.1.3 and 4.1.4 30: 90 angle, see 4.1.5 and 4.1.6 00: universal angle: see 4.2.1 and 4.2.2 Type code: Without: Without cable tie device according 4.1.1, 4.1.3 and 4.1.5 A: With cable tie device according 4.1.2, 4.
35、1.4 and 4.1.6 C: Accessory according 4.2.1 D: Accessory according 4.2.2 NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking Marking shall be in accordance with EN 2424, category P. 7 Technical specification See EN 4165-001. This page deli
36、berately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI
37、Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge
38、embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your
39、 organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards
40、, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using sta
41、ndards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to d
42、ate. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically rec
43、eive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as
44、few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our pr
45、oducts and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of
46、 and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988
47、 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
