BS EN 4505-2013 Aerospace series Non-metallic materials Textiles Test method Determination of dimensional stability《航空航天系列 非金属材料 织物 试验方法 尺寸稳定性测定》.pdf
《BS EN 4505-2013 Aerospace series Non-metallic materials Textiles Test method Determination of dimensional stability《航空航天系列 非金属材料 织物 试验方法 尺寸稳定性测定》.pdf》由会员分享,可在线阅读,更多相关《BS EN 4505-2013 Aerospace series Non-metallic materials Textiles Test method Determination of dimensional stability《航空航天系列 非金属材料 织物 试验方法 尺寸稳定性测定》.pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationBS EN 4505:2013Aerospace series Non-metallic materials Textiles Test method Determinationof dimensional stabilityBS EN 4505:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4505:2013.The UK participation in its preparation was entrus
2、ted to TechnicalCommittee ACE/65, Non-metallic materials for aerospace purposes.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its corre
3、ctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 81722 9ICS 49.025.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy
4、Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 4505:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4505 July 2013 ICS 49.025.60 English Version Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability
5、Srie arospatiale - Matriaux non-mtalliques - Textiles - Mthode dessai - Dtermination de la stabilit Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Textilien - Prfverfahren - Bestimmung der Manderung This European Standard was approved by CEN on 8 May 2013. CEN members are bound to comply with t
6、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manageme
7、nt Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status
8、 as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
9、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of
10、exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4505:2013: EBS EN 4505:2013EN 4505:2013 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Health and safety . 4 5 Principle 4 6 Apparatus
11、. 4 7 Reagents . 5 8 Preparation of specimens . 5 9 Procedure . 5 10 Calculation and expression of results . 5 10.1 Calculation of dimensional stability 5 11 Test report 5 BS EN 4505:2013EN 4505:2013 (E) 3 Foreword This document (EN 4505:2013) has been prepared by the Aerospace and Defence Industrie
12、s Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CE
13、N. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that som
14、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to impl
15、ement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania
16、, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4505:2013EN 4505:2013 (E) 4 Introduction This standard specifies the determination of dimensional stability of narrow fabrics. 1 Scope This European Standard specifies the procedure for the determination of dimens
17、ional stability of narrow fabrics. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refer
18、enced document (including any amendments) applies. ISO 139 Textiles Standard atmospheres for conditioning and testing 3 Terms and definitions For the purposes of this standard, the following terms and definitions apply. 3.1 dimensional stability the ability of a fabric to retain its dimensions when
19、immersed in boiling water 4 Health and safety This standard does not necessarily include all health and safety requirements associated with its use. Persons using this standard shall be familiar with normal laboratory/test house practices. It is the responsibility of the user to establish satisfacto
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN45052013AEROSPACESERIESNONMETALLICMATERIALSTEXTILESTESTMETHODDETERMINATIONOFDIMENSIONALSTABILITY

链接地址:http://www.mydoc123.com/p-551603.html