1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Determination of the sliding friction behaviourThe European Standard EN 4508:2006 has the status of
2、 a British StandardICS 49.040Paints and varnishes Test method for anti slip coatings BRITISH STANDARD AEROSPACE SERIESBS EN4508:2006BS EN 4508:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006ISBN 0 580 48507 2Cross-re
3、ferencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of Briti
4、sh Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front
5、 cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this s
6、ubcommittee can be obtained on request to its secretary. present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Nat
7、ional forewordThis British Standard is the official English language version of EN 4508:2006. The UK participation in its preparation was entrusted by Technical Committee ACE/65, Non-metallic materials for aerospace purposes (excluding textiles), to Subcommittee ACE/65/-/3, Paints, which has the res
8、ponsibility to: aid enquirers to understand the text;EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 4508July 2006ICS 49.040English VersionAerospace series - Paints and varnishes - Test method for antislip coatings - Determination of the sliding friction behaviourSrie arospatiale - Peintures et ve
9、rnis - Mthode dessaipour peinture antidrapante - Dtermination ducomportement au glissage avec frictionLuft- und Raumfahrt - Anstrichstoffe - Prfverfahren fr tritt-und rutschfeste Beschichtungen - Bestimmung desGleitreibungsverhaltensThis European Standard was approved by CEN on 6 January 2006.CEN me
10、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on applicati
11、on to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the sam
12、e status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovak
13、ia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for
14、CEN national Members.Ref. No. EN 4508:2006: E2 Contents Page 0 Introduction4 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Sliding friction coefficient 4 4 Principle of the method.4 5 Designation of the method .4 6 Apparatus .4 7 Test specimen5 7.1 Manufacture of test panels .5 7.2 Preparat
15、ion of test specimens .5 7.3 Number of specimens .5 8 Procedure .5 9 Presentation of the results .5 9.1 Friction coefficient.5 9.2 Requirement.6 10 Test report 6 EN 4508:20063 Foreword This European Standard (EN 4508:2006) has been prepared by the European Association of Aerospace Manufacturers - St
16、andardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standa
17、rd shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of th
18、is document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Sta
19、ndard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. EN 45
20、08:20064 0 Introduction Not applicable. 1 Scope This standard specifies the procedure for determination of the sliding friction behaviour of an anti slip coating. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences,
21、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2090, Aerospace series Aluminium alloy AL-P2024- T3 Clad sheet and strip 0,3 mm a 6 mm AMS 3200, Butadiene acrylonitrile (NBR) rubber petroleum-base hydraulic
22、fluid resistant 55 65 1)ASTM-D 471, Standard test method for rubber proberty Effect of liquids 2)3 Definitions 3.1 Sliding friction coefficient The sliding friction coefficient is the ratio between the sliding friction load achieved by the specific test and the mass of the sliding block. 4 Principle
23、 of the method Not applicable. 5 Designation of the method Not applicable. 6 Apparatus 6.1 Calibrated tensile test machine accurate within 1 %, equipped with facilities to record load path diagram. The tensile test machine shall allow a speed of 500 mm/min. 6.2 Plane support plate from constructiona
24、l steel, reinforced with angle steel profiles, to which the coated specimen according to Clause 7 is fixed or clamped (see Figure 1). 6.3 Sliding block with a mass of 5 kg and a base of 100 mm 50 mm. Five strips of NBR rubber according to AMS 3200 and 5 mm width shall be symmetrically arranged in lo
25、ngitudinal direction of the sliding block considering a distance between the strips of 5 mm. For adhesive bonding of the strips to the sliding block an adequate adhesive shall be used (see Figure 1). 1) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warendale, PA1
26、5096-001 USA. 2) Published by: American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, USA. EN 4508:20065 6.4 Smoothly running deflection pulley with diameter 130 mm fixed to the plane support plate with an angle of 90 (see Figure 1). 6.5 Cable whi
27、ch connects the sliding block via the deflection pulley with the tensile test machine. 7 Test specimen 7.1 Manufacture of test panels Aluminium alloy according to EN 2090 with the dimension 500 mm 150 mm 1,5 mm. 7.2 Preparation of test specimens 7.2.1 Pre-treatment and coating of the panel i.a.w. th
28、e relevant material specification. 7.2.2 Apply a sufficient quantity of the well stirred coating material i.a.w. the relevant material specification, so that a dry film thickness of maximum 125 m is achieved. 7.2.3 Cure the coating i.a.w. the relevant material specification. 7.3 Number of specimens
29、Three specimens shall be tested with three tests on each test specimen. 8 Procedure 8.1 Clamp each test specimen to the plane support plate. Apply (IRM-oil No. 903) ASTM-D 471 by brush on the coated surface. 8.2 Place the sliding block on the test specimen end opposing the deflection pulley. 8.3 Pul
30、l the sliding block over the total length of the test specimen at a speed of 500 mm/min using the ten-sile machine. 8.4 Perform this test three times for each test specimen without removing the test specimen from the plane support plate. 8.5 Record the frictional load as a function of the path. 9 Pr
31、esentation of the results 9.1 Friction coefficient Divide the path axis of the load -path diagram into 15 sections and read the frictional load values related to the respective sections. The mean value calculated from these values, excluding the initial and the final value of the diagram, is the sli
32、ding friction load based on the specific test. Calculate the corresponding sliding friction coefficient as follows: = gmFwhere: F sliding friction load based on the specific test (N); m mass of the sliding block (kg); g gravity (9,81 m/s2). EN 4508:20066 9.2 Requirement The minimum mean value of the
33、 sliding friction coefficient shall be as specified in the relevant material specification. 10 Test report The test report shall refer to this standard and include the following: a) Complete identification of the tested material; b) All details about the preparation of specimens; c) Date of test, fa
34、cility and identification of individuals performing the test; d) Equipment, method and test parameters used; e) Individual test results and calculations; f) Any incident which may have affected the results. All dimensions in millimetres Key 1 Thickness = 1,5 6 Deflection pulley 2 Mass = 5 kg 7 Diame
35、ter = 130 3 Sliding block 8 Support plate 4 Coated specimen 9 Details of sliding block lower surface 5 Elastomer strips Figure 1 Test arrangement EN 4508:2006blankBS EN BSI389 Chiswick High RoadLondonW4 4AL4508:2006BSI British Standards InstitutionBSI is the independent national body responsible for
36、 preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or edi
37、tions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the in
38、side front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publication
39、s should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that ha
40、ve been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also
41、available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of sta
42、ndards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is a
43、vailable on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reprodu
44、ced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, typ
45、e or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
