1、BS EN4632-005:2009ICS 49.025.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Weldability andbrazeability ofmaterials in aerospaceconstructionsPart 005: Homogeneous assemblies ofheat resisting Ni or Co base alloysLicensed Copy: Wang Bin, ISO/EX
2、CHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2010 BSI 2010ISBN 978 0 580 58876 1Amendments/corrigenda issued since publicationDate CommentsBS EN 4632-005:2009National
3、forewordThis British Standard is the UK implementation of EN 4632-005:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/2, Heat Treatment of Metallic Materials forAerospace Purposes.A list of organizations represented on this committee can be obtained onreques
4、t to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/20
5、10 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4632-005 December 2009 ICS 49.025.01 English Version Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resistin
6、g Ni or Co base alloys Srie arospatiale - Assemblages souds et brass pour constructions arospatiales - Soudabilit et brasabilit des matriaux - Partie 005: assemblage homognes des alliages base Ni ou Co rsistant haute temprature Luft- und Raumfahrt - Schweibarkeit und Ltbarkeit von Werkstoffen im Luf
7、t und Raumfahrzeugbau- - Teil 005: Schweien und Lten gleichartiger Verbindungen aus hitzebestndigen Nickel- oder Kobaltbasislegierungen This European Standard was approved by CEN on 12 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi
8、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in thre
9、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of A
10、ustria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN C
11、OMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4632-005:2009: ELicensed Copy: Wan
12、g Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms, definitions, symbols and abbreviations .74 Use of this standard 85 Updating this standard 86 List of heat resis
13、ting Ni or Co base alloys 87 Heat resisting Ni or Co base alloys9Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 3 Foreword This document (EN 4632-005:2009) has been prepared by the Aerospace and Defence Indus
14、tries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation t
15、o CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some
16、of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implem
17、ent this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland a
18、nd the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 4 1 Scope This European Standard defines degrees of weldability and brazeability for materials or families of materials used in the aerosp
19、ace industry. It comprises a series of sheets, by materials or by material family, which: indicate the main titles, the chemical composition and the main characteristics; contain recommendations for welding and brazing; indicate a degree of weldability or brazeability for a given process under defin
20、ed conditions; indicate a value of the mechanical strength coefficient of the welded joint for each welding process, when it could be extracted from bibliographic references referring to it. The joint coefficient is expressed as a ratio of the tensile strength of the welded joint to the tensile stre
21、ngth of the base alloy (to be in accordance with EN 4632-002). It is applicable without restriction for the manufacturing of new parts or for repair. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editi
22、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2161, Aerospace series Heat resisting alloy CO-CH1401 (CoCr26Ni11W) Not heat treated Precision castings 1)EN 2183, Aerospace series Heat resisting alloy NI-PH2301 (NiCr21Fe1
23、8Mo9) Solution treated Forging De 200 mm 1)EN 2184, Aerospace series Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) Solution treated Bar and section De 200 mm 1)EN 2185, Aerospace series Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) Solution treated Sheet, strip and plate 0,2 mm a 10 mm 1)EN 2199,
24、Aerospace series Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) Solution treated and precipitation treated Bar and section De 200 mm 1)EN 2203, Aerospace series Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) Solution treated Sheet, strip and plate 0,2 mm a 10 mm 1)EN 2204, Aerospace series
25、 Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Vacuum melted Solution treated and precipitation treated Precision casting De 50 mm 1)EN 2403, Aerospace series Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) Vacuum melted Solution treated and precipitation treated Precision casting a or D 50
26、mm 1)EN 2405, Aerospace series Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution treated and precipitation treated Forgings De 200 mm 1)1) Published as ASD-STAN Prestandard at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12,
27、Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 5 EN 2407, Aerospace series Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution treated and precipitation treated Sheet, strip and plate 0,2 mm a 10 mm 2)EN 2657, Aerospace series Heat resisting alloy CO-PH1402 Consumable elect
28、rode remelted Solution treated Bar a or D 150 mm Rm 860 MPa2)EN 2658, Aerospace series Heat resisting alloy CO-PH1402 Consumable electrode remelted As forged Forging stock De 360 mm2)EN 2659, Aerospace series Heat resisting alloy CO-PH1402 Consumable electrode remelted Solution treated Forgings De 1
29、00 mm Rm 860 MPa2)EN 2661, Aerospace series Heat resisting alloy CO-PH1402 Consumable electrode remelted Solution treated Sheet and strip a 3 mm Rm 860 MPa2)EN 2662, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Annealed Sheet, strip and plate 0,2 mm a 10 mm2)EN 2663, Aerospace serie
30、s Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Solution treated Sheet, strip and plate 0,2 mm a 10 mm2)EN 2959, Aerospace series Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) Solution treated and cold worked Bar for forged fasteners 3 mm D 30 mm2)EN 3668, Aerospace series Heat resisting alloy
31、NI-PH2301 (NiCr21Fe18Mo9) Non heat treated Forging stock a or D 250 mm EN 3671, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Non heat treated Forging stock a or D 250 mmEN 3884, Aerospace series Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) Filler metal for welding EN 3887, Aerosp
32、ace series Heat resisting alloy CO-WH4101 (CoCr20W15Ni) Filler metal for welding EN 3888, Aerospace series Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) Filler metal for welding EN 4095, Aerospace series Heat resisting alloy NI-CH1305 (NiCr16Co10Mo8Al4Ti4) Vacuum melted Non heat treated Precision c
33、astings2)EN 4222, Aerospace series Heat resisting alloy NI-PH1305 (NiCr22Co13Mo9Al1) Air melted and vacuum refined Annealed Sheet and strip 0,25 mm a 3 mm2)EN 4327, Aerospace series Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) Filler metal for welding Wire and rod EN 4329, Aerospace series Heat res
34、isting alloy NI-WH0001 (NiCr20) Filler metal for welding Wire and rod EN 4376, Aerospace series Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution treated and precipitation treated Bar and section De 200 mm2)EN 4377, Aerospace series Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Non heat
35、 treated Forging stock a or D 300 mm2)2) Published as ASD-STAN Prestandard at the date of publication of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 6 EN 4379, Aerospace series Heat resistin
36、g alloy NI-PH3601 (NiCr22Mo9Nb) Solution treated Forging De 200 mm EN 4380, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Solution treated Bar and section De 200 mm 3)EN 4381, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Solution treated Seamless tubes For structural
37、 application D 50 mm, a 3 mm3)EN 4382, Aerospace series Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) Solution treated Seamless tubes For hydraulic application D 50 mm, a 3 mm EN 4384, Aerospace series Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Non heat treated Remelting stock EN 4566, Aeros
38、pace series Heat resisting alloy CO-PH4101 (CoCr20W15Ni) Vacuum melted Solution treated Forgings De 100 mm3)EN 4567, Aerospace series Heat resisting alloy CO-PH4101 (CoCr20W15Ni) Vacuum melted Solution treated Bar and section a or D 100 mm3)EN 4568, Aerospace series Heat resisting alloy CO-PH4101 (C
39、oCr20W15Ni) Vacuum melted Solution treated Sheet and strip a 6 mm3)EN 4569, Aerospace series Heat resisting alloy CO-PH4101 (CoCr20W15Ni) Vacuum melted Solution treated Wire D 4 mm 3)EN 4632-001:2008, Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeabil
40、ity of materials Part 001: General requirements EN 4632-002, Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 002: Homogeneous asssemblies aluminium and aluminium alloys EN 10095, Heat resisting steels and nickel alloys EN ISO 4
41、063:2009, Welding and allied processes Nomenclature of processes and reference numbers (ISO 4063:2009) EN ISO 18274, Welding consumables Wire and strips electrodes, wires and rods for fusion welding of nickel and nickel alloys Classification (ISO 18274:2004) ISO 9722, Nickel and nickel alloys Compos
42、ition and forms of wrought products AMS 5390, Nickel alloy, corrosion and heat resistant, investment castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (N-12mv) as cast 4)AMS 5399, Nickel alloy, corrosion and heat resistant, investment castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B
43、vacuum-melted, vacuum-cast, solution heat treated 4)AMS 5402, Nickel alloy, corrosion and heat-resistant, investment castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) as cast4)3) Published as ASD-STAN Prestandard at the date of publication of this standard. 4) Published by: SAE, 400 Commonwealth Drive - W
44、arrendale, PA 15096-0001 USA. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 7 AMS 5540, Nickel alloy, corrosion and heat resistant, sheet, strip, and plate 74Ni - 15.5Cr - 8.0Fe annealed 5)AMS 5580, Nickel a
45、lloy, corrosion and heat resistant, seamless tubing 74Ni - 15.5Cr - 8.0Fe annealed5)AMS 5665, Nickel alloy, corrosion and heat resistant, bars, forgings, and rings 74Ni - 15.5Cr - 8.0Fe5)AMS 5687, Nickel alloy, corrosion and heat resistant, wire 74Ni - 15.5Cr - 8.0Fe annealed5)AWS A5.14, Specificati
46、on for Nickel and Nickel Alloy Bare Welding Electrodes and Rods 6)AWS A5.8-92, Specification for filler metals for brazing and braze welding 6)3 Terms, definitions, symbols and abbreviations For the purposes of this document, the terms and definitions given in EN 4632-001:2008 and EN ISO 4063:2009 a
47、pply. F : Foil p : Powder PJHT : Post joining heat treatment PWHT : Post-weld heat treatment w : Wire 15 : Plasma arc welding 21 : Resistance spot welding 22 : Resistance seam welding 24 : Flash welding 42 : Friction welding 51 : Electron beam welding 52 : Laser welding 91 : Brazing with local heati
48、ng 111 : Shielded metal arc welding 141 : Gas tungsten arc welding 522 : Gas laser welding 521 : Solid state laser welding 922 : Vacuum brazing 5) Published by: SAE, 400 Commonwealth Drive - Warrendale, PA 15096-0001 USA. 6) Published by: AWS, 550 N.W. LeJeune Road, Miami, Florida 33126. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 07/07/2010 02:12, Uncontrolled Copy, (c) BSIBS EN 4632-005:2009EN 4632-005:2009 (E) 8 4 Use
