1、BSI Standards PublicationBS EN 4652-001:2015Aerospace series Connectors, coaxial, radiofrequencyPart 001: Technical specificationBS EN 4652-001:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4652-001:2015.The UK participation in its preparation was entrust
2、ed to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for it
3、s correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 88568 6ICS 49.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strat
4、egy Committee on 30 June 2015.Amendments issued since publicationDate Text affectedBS EN 4652-001:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4652-001 May 2015 ICS 49.060 English Version Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification Srie aro
5、spatiale - Connecteurs coaxiaux pour radio frquences - Partie 001: Spcification technique Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 14 February 2015. CEN members are bound to comply with the CEN/C
6、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr
7、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
8、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla
9、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights
10、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4652-001:2015 EBS EN 4652-001:2015EN 4652-001:2015 (E) 2 Contents Page Foreword 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions 4 4 Description 5 5 Definition and mass . 6 6 Test m
11、ethods 21 7 Quality assurance . 26 8 Designation and marking. 34 9 Packaging 35 10 Packing 35 11 Storage 35 Bibliography 36 BS EN 4652-001:2015EN 4652-001:2015 (E) 3 Foreword This document (EN 4652-001:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardiz
12、ation (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be g
13、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document
14、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust
15、ria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede
16、n, Switzerland, Turkey and the United Kingdom. BS EN 4652-001:2015EN 4652-001:2015 (E) 4 1 Scope This European Standard specifies the required characteristics, test methods, qualification and acceptance conditions of coaxial, radio frequency connectors used with flexible radio frequency cables in ac
17、cordance with EN 4604-001 and semi-rigid coaxial cables. This family of connectors is derived from MIL-PRF-39012. Front face dimensions are identical and products are fully intermateable. Cables usable with present specification are listed in TR 6058. 2 Normative references The following documents,
18、in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series - Mark
19、ing of aerospace products EN 2591 1), Aerospace series Elements of electrical and optical connection Test methods EN 3909, Aerospace series - Test fluids and test methods for electric components and sub-assemblies EN 4604-001, Aerospace series - Cable, electrical, for signal transmission - Part 001:
20、 Technical specification EN 9133, Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts MIL-HDBK-454, General Guidelines for Electronic Equipment 2)MIL-PRF-39012, Connectors, coaxial, radio frequency General specification for 2)TR 6058, Aerospace series
21、 Cable code identification list 3)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2591-100 apply. 1) All parts quoted in this European Standard. 2) Published by: DoD National (US) Mil. Department of Defense. http:/www.defenselink.mil/ 3) Published as
22、ASD-STAN Technical Report at the date of publication of this European Standard. http:/www.asd-stan.org/ BS EN 4652-001:2015EN 4652-001:2015 (E) 5 4 Description 4.1 Types of connectors The characteristics of types of coaxial radio frequency connectors are defined in this European Standard. Type 1: BN
23、C interface, 50 impedance, bayonet coupling. Type 2: TNC interface, 50 impedance, screw-on coupling. Type 3: N interface, 50 impedance, screw-on coupling. Type 4: C interface, 50 impedance, bayonet coupling. Type 5: HN interface, 50 impedance, screw-on coupling Type 6: SMA interface, 50 impedance, s
24、crew-on coupling 4.2 Models of connectors Models of connectors are defined in this European Standard. Model code 0: straight plug. Model code 1: right angle plug. Model code 2: square flange receptacle. Model code 3: bulkhead receptacle. Model code 4: adaptor. 4.3 Technologies of assembly Cable and
25、connector assemblies are defined in this European Standard. Code 0: solder type. Code 1: clamp type. Code 2: crimp type. 4.3.1 Solder technology The core and the braid of the cable are soldered to the connector. 4.3.2 Clamp technology The core of the cable is plugged into the centre contact. A clamp
26、 nut fixes the braid of the cable onto the body of the connector (see product standard). BS EN 4652-001:2015EN 4652-001:2015 (E) 6 4.3.3 Crimp technology The core of the cable is crimped (or soldered see product standard) into the centre contact. A ferrule crimps the braid of the cable onto the body
27、 of the connector (see product standard). 4.4 Permissible cables The permissible coaxial cables shall be specified in the product standard. Their cable codes are given by TR 6058. 4.5 Materials and surface treatments See product standard. 5 Definition and mass 5.1 Dimensions and masses The general d
28、imensions and masses of the straight plug, right angle plug, square flange receptacle, bulkhead receptacle and adaptor are given in the product standard. 5.2 Interface dimensions 5.2.1 Type 1 connectors BNC interface 5.2.1.1 Plug, 50 See Figure 1 and Table 1. BS EN 4652-001:2015EN 4652-001:2015 (E)
29、7 Dimensions in millimetres Key 1 REF. Plane Figure 1 BNC plug interface Table 1 BNC plug dimensions Dimensions in millimetres A B C D E F H K L M N P Q S T U V min. 9,78 4,83 1,32 5,33 0,15 11,76 2,31 0,08 179 5,28 1,98 0,46 4,57 3,15 14,5 max. 9,91 8,31 1,37 5,84 12,01 2,46 181 0,64 5,79 0,56 4,67
30、 15,5 NOTE Slotted and flared to meet electrical and mechanical performance. 5.2.1.2 Receptacle, 50 See Figure 2 and Table 2. BS EN 4652-001:2015EN 4652-001:2015 (E) 8 Dimensions in millimetres Key 1 REF. Plane Figure 2 BNC receptacle interface Table 2 BNC receptacle dimensions Dimensions in millime
31、tres A B C D E F G H J L M N P Q R S T U min. 10,97 9,60 8,31 8,10 5,18 8,31 1,91 4,72 4,95 2,06 8,79 0,38 10,52 4,78 179 max. 11,07 9,70 8,46 8,15 4,72 5,28 8,51 2,06 5,23 2,21 9,04 0,15 6,5 0,76 5,28 181 NOTE 1 Q dimension applies to that portion (if applicable) of the dielectric which protrudes b
32、eyond the metal shoulder (or reference plane) by dimension P. NOTE 2 Clearance for mating connector coupling nut. BS EN 4652-001:2015EN 4652-001:2015 (E) 9 5.2.2 Type 2 connectors TNC interface 5.2.2.1 Plug, 50 , style A See Figures 3a and Table 3a. Dimensions in millimetres Key 1 REF. Plane Figure
33、3a TNC plug style A interface Table 3a TNC plug style A dimensions Dimensions in millimetres A B C D F G H J K L M P Q R min. 1,32 4,83 11,18 3,96 5,28 0,15 0,08 5,33 1,60 1,98 max. 1,37 8,31 5,79 1,98 1,02 5,84 8,18 0,64 NOTE Flared to meet electrical and mechanical performance. BS EN 4652-001:2015
34、EN 4652-001:2015 (E) 10 5.2.2.2 Plug, 50 , style B See Figure 3b and Table 3b. Dimensions in millimetres Key 1 REF. Plane Figure 3b TNC plug style B interface Table 3b TNC plug style B dimensions Dimensions in millimetres A B C D F G H K L M P R min. 1,32 6,05 11,18 3,96 5,28 0,08 5,33 1,60 1,98 max
35、. 1,37 6,15 8,09 5,79 1,98 1,02 5,84 0,64 BS EN 4652-001:2015EN 4652-001:2015 (E) 11 5.2.2.3 Plug, 50 , style C See Figure 3c and Table 3c. Dimensions in millimetres Key 1 REF. Plane Figure 3c TNC plug style C interface Table 3c TNC plug style C dimensions Dimensions in millimetres A B C D F G H J K
36、 L M P Q R min. 1,32 4,83 11,18 3,96 5,28 0,15 0,08 5,33 1,60 1,98 max. 1,37 8,09 5,79 1,98 1,02 5,84 8,18 0,64 BS EN 4652-001:2015EN 4652-001:2015 (E) 12 5.2.2.4 Receptacle, 50 See Figure 4 and Table 4. Dimensions in millimetres Key 1 REF. Plane Figure 4 TNC receptacle interface Table 4 TNC recepta
37、cle dimensions Dimensions in millimetres A B C D E F G H J K L M N P Q R min. 8,10 8,31 8,79 9,60 2,06 8,31 1,73 4,72 4,78 4,75 0,38 10,52 4,95 max. 4,72 8,15 8,46 9,04 9,68 2,21 8,51 2,24 0,15 5,23 5,28 0,76 6,50 NOTE 1 Q dimension applies to that portion (if applicable) of the dielectric which pro
38、trudes beyond the metal shoulder (or reference plane) by dimension J. NOTE 2 Clearance for mating connector coupling nut. BS EN 4652-001:2015EN 4652-001:2015 (E) 13 5.2.3 Type 3 connectors N interface 5.2.3.1 Plug, 50 See Figure 5 and Table 5. Dimensions in millimetres Key 1 REF. Plane Figure 5 N pl
39、ug interface Table 5 N plug dimensions Dimensions in millimetres A B C D E F G H J K M N min. 0,08 2,79 5,33 0,41 4,50 4,01 10,11 7,98 16,0 20,90 1,60 max. 1,03 3,56 5,84 1,52 4,27 10,46 8,38 21,7 1,68 0,25 NOTE 1 Slots optional (flared to meet electrical and mechanical performance). NOTE 2 Compensa
40、ting ring optional. NOTE 3 Radius or chamfer, shape of tip optional. BS EN 4652-001:2015EN 4652-001:2015 (E) 14 5.2.3.2 Receptacle, 50 See Figure 6 and Table 6. Dimensions in millimetres Key 1 REF. Plane Figure 6 N receptacle interface Table 6 N receptacle dimensions Dimensions in millimetres A B C
41、D E F G H J K L M min. 9,04 4,75 1,19 4,37 6,76 10,72 8,03 8,53 3,02 5,33 max. 9,19 5,26 1,96 5,13 7,06 8,13 8,74 15,93 3,15 NOTE Clearance for mating connector coupling nut. BS EN 4652-001:2015EN 4652-001:2015 (E) 15 5.2.4 Type 4 connectors C interface 5.2.4.1 Plug, 50 See Figure 7 and Table 7. Dim
42、ensions in millimetres Key 1 REF. Plane Figure 7 C plug interface BS EN 4652-001:2015EN 4652-001:2015 (E) 16 Table 7 C plug dimensions Dimensions in millimetres A B C E F G H J K N min. 13,79 7,01 4,93 2,29 0,18 7,80 7,85 4,85 7,54 max. 13,94 2,34 1,27 8,56 6,38 7,72 P Q R S T U V W X Y min. 44,5 17
43、9,5 3,33 14,5 2,62 0,25 2,64 15,54 max. 19,84 11,18 45,5 180,5 3,58 15,5 2,87 0,41 2,90 5.2.4.2 Receptacle, 50 See Figure 8 and Table 8. Dimensions in millimetres Key 1 REF. Plane Figure 8 C receptacle interface BS EN 4652-001:2015EN 4652-001:2015 (E) 17 Table 8 C receptacle dimensions Dimensions in
44、 millimetres A B C D E F G H J min. 14,99 13,46 12,32 11,18 10,44 3,02 max. 15,24 13,72 12,57 11,43 10,54 9,50 6,91 4,83 3,15 K L M N P Q R S T min. 8,43 7,80 2,24 7,62 179 6,93 12,57 max. 8,59 7,95 2,49 0,18 181 7,70 7,85 NOTE Clearance for mating connector coupling nut. 5.2.5 Type 5 connectors HN
45、interface 5.2.5.1 Plug, 50 See Figure 9 and Table 9. Dimensions in millimetres Key 1 REF. Plane Figure 9 HN plug interface BS EN 4652-001:2015EN 4652-001:2015 (E) 18 Table 9 HN plug dimensions Dimensions in millimetres A AA B D E F G H J L M P R T V W min. 19,30 1,60 9,10 9,33 0,13 3,50 3,05 7,34 2,
46、54 6,69 10,24 max. 23,50 14,50 1,68 9,85 0,38 3,35 1,48 NOTE Flared to meet electrical and mechanical performance. 5.2.5.2 Receptacle, 50 See Figure 10 and Table 10. Dimensions in millimetres Key 1 REF. Plane Figure 10 HN receptacle interface BS EN 4652-001:2015EN 4652-001:2015 (E) 19 Table 10 HN re
47、ceptacle dimensions Dimensions in millimetres A AB AK B C E F G K M R T U V W min. 16,80 9,02 13,92 14,50 8,33 14,99 1,96 13,11 9,12 max. 17,35 19,18 14,05 14,68 9,09 9,35 0,13 3,35 7,47 2,21 13,26 6,81 5.2.6 Type 6 connectors SMA interface 5.2.6.1 Plug, 50 See Figure 11 and Table 11. Dimensions in
48、millimetres Key 1 REF. Plane Figure 11 SMA plug interface Table 11 SMA plug dimensions Dimensions in millimetres A Hex AA B D E F J L P Q T W min. 6,35 7,85 0,90 0,00 0,00 0,38 2,16 max. 8,00 4,59 0,94 0,25 0,25 2,54 0,38 3,43 4,18 1,14 BS EN 4652-001:2015EN 4652-001:2015 (E) 20 5.2.6.2 Receptacle, 50 See Figure 12 and Table 12. Dimensions in millimetres Key 1 REF. Plane Figu
