1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 671-1:2012Fixed firefighting systems Hose systemsPart 1: Hose reels with semi-rigid hoseBS EN 671-1:2012 BRITISH STANDARDNational forewordThis British Standard is the UK im
2、plementation of EN 671-1:2012. Itsupersedes BS EN 671-1:2001 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee FSH/18/11, Hose reel systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication d
3、oes not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 75375 6ICS 13.220.10Compliance with a British Standard cannot confer immunity fromlegal
4、 obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2012.Amendments issued since publicationDate Text affectedBS EN 671-1:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 671-1 April 2012 ICS 13.220.10 Supersedes EN 6
5、71-1:2001English Version Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose Installations fixes de lutte contre lincendie - Systmes quips de tuyaux - Partie 1: Robinets dincendie arms quips de tuyaux semi-rigides Ortsfeste Lschanlagen - Wandhydranten - Teil 1: Schlau
6、chhaspeln mit formstabilem Schlauch This European Standard was approved by CEN on 9 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d
7、ate lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translatio
8、n under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fr
9、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES
10、KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 671-1:2012: EBS EN 671-1:2012EN 671-1:2012 (E) 2 Contents Page Foreword 5Introduction .61 Scope 62 Normati
11、ve references 63 Terms and definitions .64 Requirements .74.1 General 74.2 Distribution of extinguishing media 74.2.1 Hose bore .74.2.2 Minimum flow rate .74.2.3 Effective throw range 84.2.4 Spray discharge .84.3 Operational reliability 84.3.1 Hose General .84.3.2 Shut-off nozzle General 94.3.3 Reel
12、 Construction .94.3.4 Reel Rotating .94.3.5 Reel Swinging .94.3.6 Reel Resistance to impact and load .94.3.7 Shut-off nozzle Resistance to impact .94.3.8 Shut-off nozzle Operating torque 94.3.9 Inlet stop valve General .94.3.10 Inlet stop valve Manual inlet stop valve .94.3.11 Inlet stop valve Autom
13、atic inlet stop valve . 104.3.12 Hydraulic properties Resistance to internal pressure . 104.3.13 Hydraulic properties Strength 104.4 Ability to pull out the hose . 104.4.1 Reel Unwinding load 104.4.2 Reel Dynamic braking 114.4.3 Hose Maximum length . 114.5 Colour 114.6 Shut-off nozzle 114.6.1 Markin
14、g of control conditions - Rotary operated nozzles 114.6.2 Marking of control conditions - Lever and trigger operated nozzles 114.7 Cabinet . 114.7.1 General . 114.7.2 Opening/closing device . 124.7.3 Cabinet for manual hose reel with screw down type valve 124.7.4 Identification symbol 124.8 Durabili
15、ty aspects - Durability of operational reliability . 124.8.1 Resistance to corrosion on coated parts . 124.8.2 Resistance to corrosion of waterways . 124.8.3 Ageing tests for plastics materials . 125 Test methods . 135.1 General . 135.2 Distribution of extinguishing media . 135.2.1 Hose bore 135.2.2
16、 Minimum flow rate 135.2.3 Effective throw range . 13BS EN 671-1:2012EN 671-1:2012 (E) 3 5.2.4 Spray discharge . 135.3 Operational reliability 135.3.1 Hose General 135.3.2 Shut-off nozzle General . 135.3.3 Reel Construction . 135.3.4 Reel Rotating 135.3.5 Reel Swinging . 135.3.6 Reel Resistance to i
17、mpact and load . 135.3.7 Shut-off nozzle Resistance to impact . 135.3.8 Shut-off nozzle Operating torque . 145.3.9 Inlet stop valve General . 145.3.10 Inlet stop valve Manual inlet stop valve . 145.3.11 Inlet stop valve Automatic inlet stop valve 145.3.12 Hydraulic properties Resistance to internal
18、pressure 145.3.13 Hydraulic properties Strength . 145.4 Ability to pull out the hose . 145.4.1 Reel Unwinding load 145.4.2 Reel Dynamic braking 145.4.3 Hose Maximum length . 145.5 Colour . 145.6 Shut-off nozzle . 145.7 Cabinet 145.8 Durability of operational reliability 155.8.1 Resistance to externa
19、l corrosion on coated parts . 155.8.2 Resistance to corrosion of waterways 155.8.3 Ageing tests for plastics materials 156 Evaluation of conformity 156.1 General . 156.2 Initial Type Testing Type Testing 156.2.1 General . 156.2.2 Test samples 166.2.3 Test reports 166.3 Factory Production Control (FP
20、C) . 166.3.1 General . 166.3.2 Requirements . 176.3.3 Product specific requirements . 196.3.4 Initial inspection of factory and of FPC . 206.3.5 Continuous surveillance of FPC 206.3.6 Procedure for modifications. 216.3.7 One-off products, pre-production products (e.g. prototypes) and products produc
21、ed in very low quantity . 217 Marking . 228 Instruction 228.1 Instructions for use . 228.2 Installation and maintenance instructions . 22Annex A (normative) Schedule for testing sequence . 23Annex B (normative) Test method for resistance to external corrosion of coated parts 24Annex C (normative) Ag
22、eing test for resistance of plastics materials . 25Annex D (normative) Test method for resistance to corrosion of waterways 26Annex E (normative) Test methods for nozzle . 27E.1 Resistance to impact . 27E.2 Operating torque . 27E.3 Spray discharge . 27E.4 Flow rate and throw range 29E.4.1 Flow rate
23、. 29BS EN 671-1:2012EN 671-1:2012 (E) 4 E.4.2 Throw range 30Annex F (normative) Test methods for physical endurance . 31F.1 General . 31F.2 Test method for rotation 31F.3 Test method for swinging 31F.4 Test method for unwinding load . 31F.5 Test method for dynamic braking . 31F.6 Test method for res
24、istance to impact and load . 32F.6.1 Impact test . 32F.6.2 Load test 33F.7 Test method for resistance to internal pressure . 33F.8 Test method for strength . 34Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive . 35ZA.1 Scope and
25、relevant characteristics 35ZA.2 Procedure for the attestation of conformity of hose reel with semi-rigid hose . 37ZA.2.1 System of attestation of conformity . 37ZA.2.2 EC certificate of conformity . 39ZA.3 CE marking and labelling . 39BS EN 671-1:2012EN 671-1:2012 (E) 5 Foreword This document (EN 67
26、1-1:2012) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012 and conflic
27、ting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This documen
28、t supersedes EN 671-1:2001. EN 671-1:2001 has been technically revised and editorial edited. The order of clauses has been changed. Annex ZA has been updated. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports
29、 essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. For convenience of application in testing, the normative annexes of this European Standard are arranged so that Annex A gives the sequence of testi
30、ng for conformity assessment and Annexes B, C, D, E and F are in the correct sequence for testing. EN 671 has the general title “Fixed firefighting systems Hose systems” and is in three parts: Part 1: Hose reels with semi-rigid hose; Part 2: Hose systems with lay-flat hose; Part 3: Maintenance of ho
31、se reels with semi-rigid hose and hose systems with lay-flat hose. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E
32、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 671-1:2012EN 671-1:2012 (E) 6 Introduction Fire hose
33、reels in proper condition provide a very effective firefighting facility with a continuous supply of water available immediately. The requirements of this European Standard have been specified to ensure that hose reels can be operated efficiently by one person and that such systems have a long servi
34、ce life. 1 Scope This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings, permanently connected to a water supply, for use by the occupants. It also provides requirements on ev
35、aluation of conformity and marking of these products. Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements can be necessary in such cases. This European Standard is applicable to both manual and au
36、tomatic fire hose reels for installation with and without cabinets. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references
37、, the latest edition of the referenced document (including any amendments) applies. EN 671-3, Fixed firefighting systems Hose systems Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose EN 694, Fire-fighting hoses Semi-rigid hoses for fixed systems EN ISO 4892-
38、2:2006, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (ISO 4892-2:2006) EN ISO 9227:2006, Corrosion tests in artificial atmospheres Salt spray tests (ISO 9227:2006) ISO 7010, Graphical symbols Safety colours and safety signs Registered safety signs 3 Terms and defi
39、nitions For the purposes of this document, the following terms and definitions apply. 3.1 automatic fire hose reel; automatic hose reel firefighting appliance consisting essentially of a reel with water supplied through the centre, automatic inlet stop valve, semi-rigid hose, shut-off nozzle and, wh
40、ere required, a hose guide BS EN 671-1:2012EN 671-1:2012 (E) 7 3.2 fixed fire hose reel; fixed hose reel hose reel capable only of rotating in one plane with a hose guide adjacent to the reel 3.3 manual fire hose reel; manual hose reel firefighting appliance consisting of a reel with water supplied
41、through the centre, manual inlet stop valve adjacent to the reel, semi-rigid hose, shut-off nozzle and, where required, a hose guide 3.4 maximum working pressure maximum allowable pressure for which the hose reel is designed Note 1 to entry: All pressures are gauge pressures and are expressed in Meg
42、a Pascal (1 MPa = 10 bar). 3.5 reel and valve subassembly part of a fire hose reel assembly consisting of a reel, automatic inlet stop valve (if fitted) and the connection to the reel, but excluding semi-rigid hose, shut-off nozzle and connectors or couplings 3.6 shut-off nozzle component, at the en
43、d of the hose, used to direct and control the discharge of water 3.7 swinging fire hose reel; swinging hose reel hose reel capable of rotating and swinging in more than one plane and mounted on one of the following: swinging arm, or swinging pipe, or swinging door 4 Requirements 4.1 General Conformi
44、ty with the requirements given in this Clause 4 shall be verified by testing in accordance with Clause 5. 4.2 Distribution of extinguishing media 4.2.1 Hose bore The inside diameter of the hose shall be one of the following: 19 mm, or 25 mm, or 33 mm. 4.2.2 Minimum flow rate The flow rates in jet an
45、d spray settings shall be according to Table 1. BS EN 671-1:2012EN 671-1:2012 (E) 8 Table 1 Minimum flow rates and minimum K-coefficient according to pressure Nozzle- or equivalent diameter Minimum flow rate Q l/min K-coefficient amm P = 0,2 MPa P = 0,4 MPa P = 0,6 MPa 4 12 18 22 9 5 18 26 31 13 6 2
46、4 34 41 177 31 44 53 22 8 39 56 68 289 46 66 80 33 10 59 84 102 4212 90 128 156 64 aFlow rate Q at a pressure P is related to the equation Q = K P10 , where Q is in l/min and P is in MPa. 4.2.3 Effective throw range The effective throw ranges of the discharges at a pressure of 0,2 MPa shall not be l
47、ess than as follows (as appropriate): a) jet discharge: 10 m; b) sheet spray discharge: 6 m; c) conical spray discharge: 3 m. 4.2.4 Spray discharge Nozzles with a spray setting shall give a spray angle as follows: a) sheet spray: 90 5; b) conical spray: not less than 45. 4.3 Operational reliability
48、4.3.1 Hose General The hose shall be semi-rigid and according to EN 694. BS EN 671-1:2012EN 671-1:2012 (E) 9 4.3.2 Shut-off nozzle General The hose shall terminate in a shut-off nozzle, which shall give the following control settings: a) shut; b) spray; c) jet. It is recommended that the sequence should be as above with the spray setting between the shut setting and the jet setting. Any spray discharge shall be in the form of either a sheet spray or a conical spray. Trigger operated shut-off nozzles shall be self clo
