1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 848-3:2012Safety of woodworkingmachines One side mouldingmachines with rotating toolPart 3: Numerically controlled (NC) boringand routing machinesBS EN 848-3:2012 BRITISH S
2、TANDARDNational forewordThis British Standard is the UK implementation of EN 848-3:2012. Itsupersedes BS EN 848-3:2007+A2:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee MTE/23, Woodworking machines.A list of organizations represented on this commi
3、ttee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 72605 7ICS 79.120.10C
4、ompliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2012.Amendments issued since publicationDate Text affectedBS EN 848-3:2012EUROPEAN STANDARD NORME EUROPE
5、NNE EUROPISCHE NORM EN 848-3 October 2012 ICS 79.120.10 Supersedes EN 848-3:2007+A2:2009English Version Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines Scurit des machines pour le travail du bois - Machi
6、nes fraiser sur une face outils rotatifs - Partie 3: Perceuses et dfonceuses commande numrique Sicherheit von Holzbearbeitungsmaschinen - Frsmaschinen fr einseitige Bearbeitung mit drehendem Werkzeug - Teil 3: NC-Bohr- und Frsmaschinen This European Standard was approved by CEN on 11 August 2012. CE
7、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app
8、lication to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC M
9、anagement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, La
10、tvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1
11、000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 848-3:2012: EBS EN 848-3:2012EN 848-3:2012 (E) 2 Contents Page Foreword 4Introduction .51 Scope 62 Normative references 63 Terms and definitions .94 List of signific
12、ant hazards . 175 Safety requirements and/or measures . 195.1 General . 195.2 Controls . 205.2.1 Safety and reliability of control systems 205.2.2 Position of controls 215.2.3 Starting 225.2.4 Normal stopping . 225.2.5 Emergency stop 235.2.6 Operational stop . 245.2.7 Mode selection switch 245.2.8 S
13、peed control system 265.2.9 Interlocking of guards, protective devices, movements and functions 275.2.10 Failure of the power supply . 275.2.11 Failure of the control circuits 275.3 Protection against mechanical hazards . 275.3.1 Stability 275.3.2 Risk of break-up during operation 275.3.3 Tool holde
14、r 285.3.4 Braking tool spindle(s) . 285.3.5 Devices to minimise the risk of ejection 295.3.6 Workpiece supports and guides . 295.3.7 Prevention of access to moving parts and devices to minimise the effect of ejection . 295.3.8 Clamping device . 405.4 Protection against non-mechanical hazards . 425.4
15、.1 Fire . 425.4.2 Noise 425.4.3 Emission of chips and dust . 435.4.4 Electricity . 445.4.5 Ergonomics and handling 445.4.6 Lighting 455.4.7 Pneumatics 455.4.8 Hydraulics 455.4.9 Static electricity 455.4.10 Electromagnetic compatibility . 455.4.11 Lasers 455.4.12 Unintended movements . 465.4.13 Suppl
16、y disconnecting devices 465.4.14 Maintenance 466 Information for use . 466.1 Warning devices . 466.2 Marking 476.3 Instruction handbook . 47BS EN 848-3:2012EN 848-3:2012 (E) 3 Annex A (normative) Operating conditions for noise measurement. 52A.1 General . 52A.2 Operating conditions for routing units
17、 of NC routing machines and NC combined boring/routing machines 52A.2.1 General . 52A.2.2 Noise measurements 53A.2.3 General data sheet 55A.3 Operating conditions for boring units of NC boring machines and NC combined boring/routing machines 57A.3.1 General . 57A.3.2 Noise measurements 58A.3.3 Gener
18、al data sheet 60Annex B (normative) Curtains on NC routing and NC combined boring and routing machines Impact test method 63B.1 General . 63B.2 Test method . 63B.2.1 Preliminary remarks 63B.2.2 Testing equipment . 63B.2.3 Test procedure . 64B.3 Results 66B.4 Assessment . 67B.5 Test report 67Annex C
19、(informative) Example of a test equipment for impact test . 69Annex D (normative) Braking tests . 70D.1 Conditions for brake tests 70D.2 Tests . 70D.2.1 Un-braked run-down time . 70D.2.2 Braked run-down time . 70Annex E (normative) Curtains on NC routing and NC boring and routing machines Wear test
20、method 71E.1 General . 71E.2 Test method . 71E.2.1 Preliminary remarks 71E.2.2 Test method . 71E.3 Results 76E.4 Assessment . 76E.5 Test report 76Annex F (normative) Rigid guards on NC routing machines Impact test method 77F.1 General . 77F.2 Test method . 77F.2.1 Preliminary remarks 77F.2.2 Testing
21、 equipment . 77F.2.3 Test procedure . 78F.3 Results 78F.4 Assessment . 78F.5 Test report 79F.6 Example of test equipment for impact test . 79Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 80Bibliography 83BS EN 848-3:2012E
22、N 848-3:2012 (E) 4 Foreword This document (EN 848-3:2012) has been prepared by Technical Committee CEN/TC 142 “Woodworking machines - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text
23、or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible fo
24、r identifying any or all such patent rights. This document supersedes EN 848-3:2007+A2:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive. For relationsh
25、ip with EU Directive, see informative Annex ZA, which is an integral part of this document. The main modification to the 2009 edition relates to the introduction of performance levels (PL) and curtains wear test. Organisations contributing to the preparation of this document include the European Com
26、mittee of Woodworking Machinery Manufacturers Association “EUMABOIS“. EN 848 consists of the following parts: EN 848-1, Safety of woodworking machines One side moulding machines with rotating tool Part 1: Single spindle vertical moulding machines; EN 848-2, Safety of woodworking machines One side mo
27、ulding machines with rotating tool Part 2: Single spindle hand fed/integrated fed routing machines; EN 848-3, Safety of woodworking machines One side moulding machines with rotating tools Part 3: Numerically controlled (NC) boring and routing machines (the present document). The European Standards p
28、roduced by CEN/TC 142 are particular to woodworking machines and compliment the relevant A and B standards on the subject of general safety (see Introduction of EN ISO 12100:2010 for a description of A, B and C standards). According to the CEN/CENELEC Internal Regulations, the national standards org
29、anisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg
30、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 848-3:2012EN 848-3:2012 (E) 5 Introduction This document has been prepared to be a harmonised standard to provide one means of conforming to the essential hea
31、lth and safety requirements of the Machinery Directive and associated EFTA Regulations. This document is a type C standard as defined in EN ISO 12100:2010. The machinery concerned and the extent to which hazards, hazardous situations and events covered are indicated in the scope of this document. Wh
32、en provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard.
33、 The requirements of this document are directed to manufacturers and their authorised representatives of numerically controlled (NC) boring machines and routing machines. It is also useful for designers. This also includes examples of information to be provided by the manufacturer to the user. Commo
34、n requirements for tooling are given in EN 847-1:2005+A1:2007 and EN 847-2:2001. BS EN 848-3:2012EN 848-3:2012 (E) 6 1 Scope This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4, which are relevant to NC boring machines, NC routing machines
35、and NC combined boring/routing machines (as defined in 3.1) herein after referred to as “machines“ designed to cut solid wood, chip board, fibreboard, plywood and also these materials where these are covered with plastic/light alloy laminate or edgings when they are used as intended and under the co
36、nditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. This document also applies to machines fitted with: additiona
37、l equipment for sawing, sanding, edge banding or assembly units and dowel devices; fixed or movable workpiece support; mechanical, pneumatic, hydraulic or vacuum workpiece clamping; automatic tool change facilities. This document does not deal with the specific hazards of edge banding equipment fitt
38、ed to NC boring machines, NC routing machines and NC combined boring/routing machines. This document is only applicable to NC boring machines, NC routing machines and NC combined boring/routing machines which are designed to use milling tools with a cutting circle diameter below 16 mm or milling too
39、ls or saw-blades conforming to EN 847-1:2005+A1:2007 and EN 847-2:2001 and boring tools or sanding wheels. This document is not applicable to NC boring machines, NC routing machines and NC combined boring/routing machines which are designed to use grinding wheels. This document is not applicable to
40、single spindle hand fed/integrated fed routing machines. NOTE Single spindle hand fed/integrated fed routing machines are dealt with in EN 848-2:2007+A1:2009. This document does not deal with the specific hazards of ejection through openings on machines where the distance between the work-piece supp
41、ort and the lower edge of the partial enclosure exceeds 400 mm. This document is not applicable to NC boring machines, NC routing machines and NC combined boring/routing machines which are manufactured before the date of its publication as EN. 2 Normative references The following documents, in whole
42、 or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 847-1:2005+A1:2007, Tools for woodwor
43、king Safety requirements Part 1: Milling tools, circular saw blades EN 847-2:2001, Tools for woodworking Safety requirements Part 2: Requirements for the shank of shank mounted milling tools BS EN 848-3:2012EN 848-3:2012 (E) 7 EN 894-1:1997+A1:2008, Safety of machinery Ergonomics requirements for th
44、e design of displays and control actuators Part 1: General principles for human interactions with displays and control actuators EN 894-2:1997+A1:2008, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3:2000+A1:2008, Safety of machi
45、nery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 1005-1:2001+A1:2008, Safety of machinery Human physical performance Part 1: Terms and definitions EN 1005-2:2003+A1:2008, Safety of machinery Human physical performance Part 2: Manual handling
46、of machinery and component parts of machinery EN 1005-3:2002+A1:2008, Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation EN 1005-4:2005+A1:2008, Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in
47、 relation to machinery EN 1037:1995+A1:2008, Safety of machinery Prevention of unexpected start-up EN 1088:1995+A2:2008, Safety of machinery Interlocking devices associated with guards Principles for design and selection EN 1760-1:1997+A1:2009, Safety of machinery Pressure sensitive protective devic
48、es Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-3:2004+A1:2009, Safety of machinery Pressure sensitive protective devices Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices EN 1837:1999+A1:2009, Safety of machinery Integral lighting of machines EN 12779:2004+A1:2009, Safety of woodworking machi
