BS EN 12090-2013 Thermal insulating products for building applications Determination of shear behaviour《建筑物用隔热产品 剪切特性的测定》.pdf
《BS EN 12090-2013 Thermal insulating products for building applications Determination of shear behaviour《建筑物用隔热产品 剪切特性的测定》.pdf》由会员分享,可在线阅读,更多相关《BS EN 12090-2013 Thermal insulating products for building applications Determination of shear behaviour《建筑物用隔热产品 剪切特性的测定》.pdf(18页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 12090:2013Thermal insulating productsfor building applications Determination of shearbehaviourBS EN 12090:2013 BRITISH STANDARDNational forewordThis British Standard is the
2、 UK implementation of EN 12090:2013. Itsupersedes BS EN 12090:1997 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this committee can beobtained on req
3、uest to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013.Published by BSI Standards Limited 2013 ISBN 978 0 580 78050 9 ICS 91.100.60 Compliance with a Britis
4、h Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2013. Amendments issued since publicationDate Text affectedBS EN 12090:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12
5、090 March 2013 ICS 91.100.60 Supersedes EN 12090:1997English Version Thermal insulating products for building applications - Determination of shear behaviour Produits isolants thermiques destins aux applications du btiment - Dtermination du comportement en cisaillementWrmedmmstoffe fr das Bauwesen -
6、 Bestimmung des Verhaltens bei Scherbeanspruchung This European Standard was approved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any a
7、lteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
8、made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Es
9、tonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR ST
10、ANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12090:2013: EBS EN 12090:2013EN 12090:2013 (E) 2
11、Contents Page Foreword . 3 1 Scope 5 2 Normative references . 5 3 Terms and definitions 5 4 Principle 5 5 Apparatus . 5 6 Test specimens 9 6.1 Dimensions of test specimens 9 6.1.1 General . 9 6.1.2 Single test specimen 9 6.1.3 Double test specimen 10 6.2 Number of test specimens . 10 6.3 Preparation
12、 of test specimens . 10 6.4 Conditioning of test specimens. 10 7 Procedure . 10 7.1 Test conditions . 10 7.2 Test procedure . 10 8 Calculation and expression of results 11 8.1 General . 11 8.2 Shear strength 11 8.3 Shear modulus . 11 9 Accuracy of measurement . 12 10 Test report 12 BS EN 12090:2013E
13、N 12090:2013 (E) 3 Foreword This document (EN 12090:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an iden
14、tical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be
15、held responsible for identifying any or all such patent rights. This document supersedes EN 12090:1997. The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test
16、 methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administr
17、ative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. This European tes
18、t standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications Determination of
19、length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal
20、insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dimensional stability under consta
21、nt normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of defo
22、rmation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep BS EN 12090:2013EN 12090:2013 (E) 4 EN 1607, Thermal insulating products for building applications Determination of tensile strength p
23、erpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating produ
24、cts for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long-term water ab
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN120902013THERMALINSULATINGPRODUCTSFORBUILDINGAPPLICATIONSDETERMINATIONOFSHEARBEHAVIOUR 建筑物 隔热 产品
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-570030.html