1、BRITISH STANDARD BS EN 12927-1:2004 Safety requirements for cableway installations designed to carry persons Ropes Part 1: Selection criteria for ropes and their end fixings The European Standard EN 12927-1:2004 has the status of a British Standard ICS 45.100 BS EN 12927-1:2004 This British Standard
2、 was published under the authority of the Standards Policy and Strategy Committee on 28 October 2004 BSI 28 October 2004 ISBN 0 580 44673 5 National foreword This British Standard is the official English language version of EN 12927-1:2004. The UK participation in its preparation was entrusted to Te
3、chnical Committee MCE/20, Aerial ropeways, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document ma
4、y be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users
5、are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, a
6、nd keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 11 and a back cover. The BSI copyright notice displayed in this docum
7、ent indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN129271 October2004 ICS45.100 Englishversion Safetyrequirementsforcablewayinstallationsdesignedtocarry personsRopesPart1:Selectioncriteriaforrope
8、sandtheir endfixings Prescriptionsdescuritdesinstallationscbles transportantdespersonnesCblesPartie1:Critresde slectiondescblesetdeleursattachesdextrmit SicherheitsanforderungenfrSeilbahnenund SchleppaufzgedesPersonenverkehrsSeileTeil1: AuswahlkriterienfrSeileundSeilbefestigungen ThisEuropeanStandar
9、dwasapprovedbyCENon23August2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicat
10、iontotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersa
11、rethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTAND
12、ARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN129271:2004:EEN 12927-1:2004 (E) 2 Contents Page Foreword3 1 Scope 5 2 Normative re
13、ferences 5 3 Terms and definitions .6 4 General requirements6 5 Safety principle 6 5.1 General6 5.2 Hazard scenarios .7 5.3 Safety measures 7 6 Safety requirements 7 6.1 Ropes 7 6.2 End fixings7 Table 1 Rope selection criteria .8 Table 1 (end)9 Table 2 End fixings selection criteria.10 Annex ZA (inf
14、ormative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons .11 Table ZA Correspondence between this European Standard and Directive 2000/9/EC relating to cableway installations designed t
15、o carry persons.11 EN 12927-1:2004 (E) 3 Foreword This document (EN 12927-1:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national
16、standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade
17、Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This EN 12927 includes the following parts under the general title “Safety requirements for cableway installations designe
18、d to carry persons Ropes“: Part 1: Selection criteria for ropes and their end fixings Part 2: Safety factors Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes Part 4: End fixings Part 5: Storage, transportation, installation and tensioning Part 6: Discard criteria Part 7:
19、Inspection, repair and maintenance Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by rope. This programme includes the following standards : 1) Safety
20、requirements for cableway installations designed to carry persons - Terminology 2) Safety requirements for cableway installations designed to carry persons - General requirements 3) Safety requirements for cableway installations designed to carry persons Calculations 4) Safety requirements for cable
21、way installations designed to carry persons - Ropes 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices 6) Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment 7) Safety requirements for c
22、ableway installations designed to carry persons Carriers 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons - Civil engineering works EN 12927-1:20
23、04 (E) 4 10) Safety requirements for cableway installations designed to carry persons Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons Recovery and evacuation 12) Safety requirements for passe
24、nger transportation by rope - Operation 13) Safety requirements for cableway installations designed to carry persons - Quality assurance Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all installations for passenger transportation by
25、 rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to imp
26、lement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdo
27、m. EN 12927-1:2004 (E) 5 1 Scope This part of EN 12927 specifies the safety requirements applicable to the selection criteria for ropes and their end fixings for installations for passenger transportation by rope. Its requirements are to be met taking into account the various types installations sys
28、tems and their environment. This part of EN 12927 provides guidance on the selection of ropes and their end fixing for use on cableways. It does not apply for transportation of goods nor to inclined lifts. 2 Normative references The following referenced documents are indispensable for the applicatio
29、n of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1492-4, Textile slings Safety Part 4: Lifting slings for general service made from natural and man-made fibre ropes.
30、EN 1709, Safety requirements for cableway installations designed to carry persons - Pre-commissioning inspection, maintenance, operational inspection and checks. prEN 1907:2004, Safety requirements for cableway installations designed to carry persons - Terminology. EN 1908, Safety requirements for c
31、ableway installations designed to carry persons - Tensioning devices. EN 1909, Safety requirements for cableway installations designed to carry persons - Recovery and evacuation. EN 12385-2:2002, Steel wire ropes - Safety - Part 2: Definitions, designation and classification. EN 12385-8, Steel wire
32、ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons. EN 12385-9, Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons. EN 12397, Safety requirements for cableway insta
33、llations designed to carry persons Operation. EN 12408, Safety requirements for cableway installations designed to carry persons - Quality assurance. EN 12927-2, Safety requirements for cableway installations designed to carry persons Ropes Part 2: Safety factors. EN 12927-3, Safety requirements for
34、 cableway installations designed to carry persons Ropes Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes. EN 12927-4:2004, Safety requirements for cableway installations designed to carry persons Ropes Part 4: End fixings. EN 12927-5, Safety requirements for cableway inst
35、allations designed to carry persons Ropes Part 5: Storage, transportation, installation and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons - Ropes - Part 6 : Discard criteria. EN 12927-7, Safety requirements for cableway installations designed to car
36、ry persons Ropes Part 7: Inspection, repair and maintenance. EN 12927-1:2004 (E) 6 EN 12927-8, Safety requirements for cableway installations designed to carry persons Ropes Part 8: Magnetic rope testing (MRT). EN 12929-1, Safety requirements for passenger transportation by rope - General requiremen
37、ts - Part 1: Requirements applicable to all installations. EN 12929-2, Safety requirements for cableway installations designed to carry persons General requirements Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes. EN 12930, Safety requirements for
38、cableway installations designed to carry persons Calculations. EN 13107, Safety requirements for cableway installations designed to carry persons Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry persons Drive systems and other mechanical equipment.
39、EN 13243, Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems. EN 13411-3:2004, Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing. EN 13411-5:2003, Terminations for steel wire ropes - Safety - P
40、art 5: U-bolt wire rope grips. EN 13411-6:2004, Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket. prEN 13796-1, Safety requirements for cableway installations designed to carry persons Carriers Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, mainten
41、ance carriers, tow-hangers. prEN 13796-2, Safety requirements for cableway installations designed to carry persons Carriers Part 2: Slipping resistance tests for grips. prEN 13796-3, Safety requirements for cableway installations designed to carry persons Carriers Part 3: Fatigue testing. 3 Terms an
42、d definitions For the purposes of this document, the terms and definitions given in prEN 1907:2004, EN 12385-2:2002, EN 13411-5:2003, EN 12927-4:2004, EN 13411-3:2004, EN 13411-6:2004 and the following apply. 3.1 nominal diameter dimension by which the rope is designed 4 General requirements The req
43、uirements of this document apply to all installations along with those of EN 1709, EN 1908, EN 1909, EN 12397, EN 12408, EN 12927-2, EN 12927-3, EN 12927-4, EN 12927-5, EN 12927-6, EN 12927-7, EN 12927-8, EN 12929-1, EN 12929-2, EN 12930, EN 13107, EN 13223, EN 13243, prEN 13796-1, prEN 13796-2 and
44、prEN 13796- 3. 5 Safety principle 5.1 General The safety principles set out in EN 12929-1 apply. EN 12927-1:2004 (E) 7 5.2 Hazard scenarios The following events may lead to hazardous situations which may be avoided or limited by the requirements of this document: a) The breakage of a rope or the fai
45、lure of an end fixing may lead to the following hazardous situations: 1) Falling down of rope with the risk of carrier crash and the risk of impact to persons; 2) Release of the elastic potential energy of a tensioned / extended rope; b) Deterioration/damages of the structure of the rope can lead to
46、 the following hazardous situations: 1) Derailment of rope (deropement); 2) Derailment of carrier truck. 5.3 Safety measures The safety measures to be taken to eliminate the danger factors listed under 5.2 are to select ropes and end fixings in accordance with this part of this standard in order to
47、apply and to put into effect also the other parts of this standard. 6 Safety requirements 6.1 Ropes Ropes shall be selected in accordance with Table 1. “Hercules“ ropes shall only be selected to replace “Hercules“ ropes on existing installations. Locked coil ropes shall be in accordance with EN 1238
48、5-9. EN 12385-9 can be used for all applications for locked coil ropes according to Table 1. Stranded ropes shall be in accordance with EN 12385-8. Fiber ropes shall be in accordance with EN 1492-4 6.2 End fixings End fixings shall be selected in accordance with Table 2. EN 12927-1:2004 (E) 8 Table 1 Rope selection criteria Aerial ropeway Type of cableway for passenger transport Monocable or double monocable Bicable Ordinary designation of cablewa
