BS EN 13203-1-2015 Gas fired domestic appliances producing hot water Assessment of performance of hot water deliveries《生产热水的燃气家用设备 热水传输的性能评估》.pdf

上传人:registerpick115 文档编号:571242 上传时间:2018-12-13 格式:PDF 页数:36 大小:1.79MB
下载 相关 举报
BS EN 13203-1-2015 Gas fired domestic appliances producing hot water Assessment of performance of hot water deliveries《生产热水的燃气家用设备 热水传输的性能评估》.pdf_第1页
第1页 / 共36页
BS EN 13203-1-2015 Gas fired domestic appliances producing hot water Assessment of performance of hot water deliveries《生产热水的燃气家用设备 热水传输的性能评估》.pdf_第2页
第2页 / 共36页
BS EN 13203-1-2015 Gas fired domestic appliances producing hot water Assessment of performance of hot water deliveries《生产热水的燃气家用设备 热水传输的性能评估》.pdf_第3页
第3页 / 共36页
BS EN 13203-1-2015 Gas fired domestic appliances producing hot water Assessment of performance of hot water deliveries《生产热水的燃气家用设备 热水传输的性能评估》.pdf_第4页
第4页 / 共36页
BS EN 13203-1-2015 Gas fired domestic appliances producing hot water Assessment of performance of hot water deliveries《生产热水的燃气家用设备 热水传输的性能评估》.pdf_第5页
第5页 / 共36页
点击查看更多>>
资源描述

1、BSI Standards PublicationBS EN 13203-1:2015Gas fired domestic appliances producing hot waterPart 1: Assessment of performance of hot water deliveriesBS EN 13203-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13203-1:2015. It supersedes BS EN 13203-1:2006

2、 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GSE/29, Gas-fired central heating boilers (domestic and non-domestic) and domestic gas-fired water heaters.A list of organizations represented on this committee can be obtained on request to its secretar

3、y.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 88553 2 ICS 91.140.65 Compliance with a British Standard cannot

4、confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 13203-1:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE

5、NORM EN 13203-1 September 2015 ICS 91.140.65 Supersedes EN 13203-1:2006English Version Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries Appareils domestiques produisant de leau chaude sanitaire utilisant les combustibles gazeux - Partie 1

6、: valuation de la performance en puisage deau chaudeGasbeheizte Gerte fr die sanitre Warmwasserbereitung fr den Hausgebrauch - Teil 1: Bewertung der Leistung der Warmwasserbereitung This European Standard was approved by CEN on 14 August 2015. CEN members are bound to comply with the CEN/CENELEC Int

7、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to an

8、y CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official v

9、ersions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

10、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploit

11、ation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13203-1:2015 EBS EN 13203-1:2015EN 13203-1:2015 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 General test conditions . 7 4.1 Reference conditions

12、. 7 4.2 Measurement uncertainties 7 4.3 Test conditions . 8 4.3.1 General 8 4.3.2 Test room . 8 4.3.3 Water supply . 8 4.3.4 Steady state . 8 4.3.5 Initial adjustment of the appliance . 8 4.3.6 Initial state conditions 9 4.3.7 Electrical supply 9 5 Characterisation of the domestic hot water function

13、 of appliances . 9 5.1 General 9 5.2 Characterisation according to the domestic hot water rates 9 5.2.1 Specific rate . 9 5.2.2 Tapping capability . 10 5.2.3 Classification according to the quantity of available domestic hot water . 11 5.3 Classification according to the quality of the domestic hot

14、water produced . 12 5.3.1 Classification procedure 12 5.3.2 Test for classification according to the performance in delivery of domestic hot water production . 13 6 Information 15 7 Eco design Related Products Data 16 7.1 Mixed water at 40 C (V40) . 16 Annex A (informative) Test conditions 17 Annex

15、B (informative) Test rig and measurement devices 27 B.1 General . 27 B.2 Pressure measurement 28 B.3 Temperature measurement . 28 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EU) n 814/2013 . 31 Bibliography . 32 BS EN 13203-1:2015

16、EN 13203-1:2015 (E) 3 European foreword This document (EN 13203-1:2015) has been prepared by Technical Committee CEN/TC 109 “Central heating boilers using gaseous fuels”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publi

17、cation of an identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shal

18、l not be held responsible for identifying any or all such patent rights. This document supersedes EN 13203-1:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).

19、For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. The main changes in this revision are the following: The title of this standard has been changed to: “Gas fired domestic appliances producing hot water Part 1: Assessment of performance of ho

20、t water deliveries“; “heat input not exceeding 70 kW“ was removed from the title but remains unchanged in the scope; “300 litres water storage“ has been removed from the title and the scope is changed as following: hot water storage capacity (if any) not exceeding 500 l; A new Clause 7 is added: “7

21、Eco design Related Products Data“; An informative Annex ZA is added for the relationship between this European Standard and the requirements of Commission Regulation (EU) n 814/2013. NOTE Useful standards are EN 26, EN 89, EN 15502-1, EN 15502-2-1 and EN 15502-2-2. According to the CEN-CENELEC Inter

22、nal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ir

23、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13203-1:2015EN 13203-1:2015 (E) 4 1 Scope This European Standard is applicable to gas-fired appliances producing do

24、mestic hot water. It applies to both instantaneous and storage appliances; water-heaters and combination boilers that have: heat input not exceeding 70 kW; and hot water storage capacity (if any) not exceeding 500 l. In the case of combination boilers, with or without storage tank, domestic hot wate

25、r production is integrated or coupled, the whole being marketed as a single unit. This European Standard sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user.

26、 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amen

27、dments) applies. Not applicable. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 control cycle time cycle for keeping components and/or the hot storage water tank (if any) of the domestic hot water circuit at predetermined temperature level,

28、consists of an ON duration time during which the heating of the domestic hot water (by gas energy and auxiliary energy) is operating, and an OFF duration time during which no heating occurs 3.2 domestic water mean temperature average temperature of the water delivered during the time t = 1T Tttmd No

29、te 1 to entry: SYMBOL = Tm3.3 domestic water test temperature temperature of the delivered water at which the tests are conducted 3.4 storage tank reservoir for domestic hot water BS EN 13203-1:2015EN 13203-1:2015 (E) 5 3.5 kitchen specific rate domestic hot water rate corresponding to a mean temper

30、ature rise of 45 K that the appliance can supply Note 1 to entry: SYMBOL = DcNote 2 to entry: Dcis expressed in litre per minute (l/min) 3.6 minimum declared water rate lowest water rate stated by the manufacturer maintaining a stable temperature Note 1 to entry: SYMBOL = DmNote 2 to entry: Dmis exp

31、ressed in litre per minute (l/min) 3.7 nominal domestic hot water heat input value of the heat input stated by the manufacturer for the production of domestic hot water Note 1 to entry: SYMBOL = QnwNote 2 to entry: Qnwis expressed in kilowatt (kW) 3.8 overall performance factor numerical value used

32、to quantify the overall performance associated with domestic hot water use, corresponding to the sum of the products of the particular performance factors multiplied by the weighting coefficients Note 1 to entry: SYMBOL = F =1a .fniiiF 3.9 particular performance factor numerical value which quantifi

33、es each of the performance criteria listed in Table 1 Note 1 to entry: SYMBOL = fi3.10 specific rate domestic hot water rate declared by the manufacturer corresponding to a mean temperature rise of 30 K that the appliance can supply in two successive delivery periods Note 1 to entry: SYMBOL = D Note

34、 2 to entry: D is expressed in litre per minute (l/min) 3.11 summer mode conditions during which the appliance supplies energy only for the production of domestic hot water BS EN 13203-1:2015EN 13203-1:2015 (E) 6 3.12 tapping capability hot water delivery rate, declared by the manufacturer, at which

35、 water can be drawn off for a specified time or times (5 min; 10 min; 20 min or continuous) with a predetermined temperature rise Note 1 to entry: SYMBOL = R Note 2 to entry: R is expressed in litre per minute (l/min) 3.13 temperature fluctuation at a constant water rate difference between the minim

36、um and maximum water temperatures that can occur during delivery at a constant water rate with a constant inlet temperature Note 1 to entry: SYMBOL = T2Note 2 to entry: T2is expressed in Kelvin (K) 3.14 temperature fluctuation between successive deliveries maximum domestic hot water temperature diff

37、erence between successive deliveries Note 1 to entry: SYMBOL = T3Note 2 to entry: T3is expressed in Kelvin (K) 3.15 temperature stabilization time following a variation of the water flow rate time taken to obtain a predetermined fluctuation, following a rapid variation of the water flow rate Note 1

38、to entry: SYMBOL = tsNote 2 to entry: tsis expressed in second (s) 3.16 temperature variation according to water rate variation of the mean hot water temperature consequent upon variations of the water flow rate Note 1 to entry: SYMBOL = T1Note 2 to entry: T1is expressed in Kelvin (K) 3.17 waiting t

39、ime time taken to reach, at appliance outlet, 90 % of the domestic hot water temperature rise of 45 K without subsequently falling below 34 K Note 1 to entry: SYMBOL = tmNote 2 to entry: tmis expressed in second (s) 3.18 weighting coefficient numerical coefficient used to quantify the importance giv

40、en to each particular performance factor in connection with the use of domestic hot water BS EN 13203-1:2015EN 13203-1:2015 (E) 7 Note 1 to entry: SYMBOL = ai3.19 rapid response thermometer measuring instrument with a response time such that 90 % of the final temperature rise, from 15 C to 100 C, is

41、 obtained within about 1 s, when the sensor is plunged into still water 4 General test conditions 4.1 Reference conditions Unless otherwise stated, the general test conditions are as follows: cold water temperature: 10 C; maximum average variation over the test period: 2 K cold water pressure: (2 0,

42、1) bar; ambient air temperature: 20 C; maximum average variation over the test period 1 K maximum variation during the tests 2 K electrical supply voltage: (230 2) V (single phase). 4.2 Measurement uncertainties Except where otherwise stated in the clauses describing the tests, the uncertainties of

43、measurements carried out shall not be greater than the maximum uncertainties indicated below. The standard deviations take account the various sources of uncertainty: contribution from the instrument, repeatability, calibration, ambient conditions, etc. water rate: 1 %; gas rate: 1 %; time: 0,2 s; t

44、emperatures: ambient: 1 K; water: 0,5 K; gas: 0,5 K; mass: 0, 5 %; gas pressure: 1 %; gas calorific value: 1 %; gas density: 0,5 %; BS EN 13203-1:2015EN 13203-1:2015 (E) 8 electrical energy: 2 %. The stated measurement uncertainties relate to individual measurements. For measurements that combine a

45、number of individual measurements, smaller uncertainties on the individual measurements may be necessary to ensure a total uncertainty within 2 % under the steady state conditions. These uncertainties correspond to two standard deviations (2). 4.3 Test conditions 4.3.1 General Except where otherwise

46、 stated, the appliance shall be tested under the following conditions. 4.3.2 Test room The appliance shall be installed in a well-ventilated, draught-free room (air speed less than 0,5 m/s). The appliance shall be protected from direct solar radiation and radiation from heat generators. 4.3.3 Water

47、supply For the tests: domestic water pressure is the static inlet pressure under dynamic conditions measured as close as possible to the appliance; inlet and outlet temperatures of the domestic water shall be measured in the centre of the flow and as close as possible to the appliance. The inlet tem

48、peratures shall be measured immediately upstream of the water inlet connection. Except where otherwise stated, the outlet temperatures shall be measured immediately downstream of the outlet connection or, in the case of an appliance with spout delivery, by means of an immersed temperature measuring

49、device, e.g. a u-tube fitted at the outlet of a tube of the same length as the minimum length of the spout normally supplied by the manufacturer. The hot water temperature shall be measured with a rapid response thermometer. “Rapid response thermometer“ means a measuring instrument with a response time such that 90 % of the final temperature rise, from 15 C to 100 C, is obtained within about 1 s, when the sensor is plunged into still water. 4.3.4 Steady stat

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1