1、Unbound and hydraulically bound mixturesPart 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixturesBS EN 13286-43:2003Incorporating Corrigendum July 2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME
2、 EUROPENNEEUROPISCHE NORMEN 13286-43March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 43: Testmethod for the determination of the modulus of elasticity ofhydraulically bound mixturesMlanges traits et mlanges non traits aux liantshydraulique - Partie 43: Mthode des
3、sai pour ladtermination du module dlasticit des graves traits auxliants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil43: Prfverfahren zur Bestimmung des Elastizittsmodulshydrauliaulisch gebundener GemischeThis European Standard was approved by CEN on 29 November 2002.CEN members
4、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to
5、the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status a
6、s the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPE
7、AN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-43:2003 ENational forewordTh
8、is British Standard is the UK implementation of EN 13286-43:2003.The UK participation in its preparation was entrusted to Technical Committee B/510, Road materials, to Subcommittee B/150/4, Cementitious bound materials, which has the responsibility to: aid enquirers to understand the text; present t
9、o the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obta
10、ined on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 0 580 41416 7ICS 93.090.20Compliance with a
11、British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 18 March 2003.Amendments/corrigenda issued since publicationDate Text affected31 July 2017 Correction inserting missing symbols in
12、 Clause 4.5BRITISH STANDARDBS EN 13286-43:2003EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13286-43March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 43: Testmethod for the determination of the modulus of elasticity ofhydraulically bound mixturesMlanges traits
13、 et mlanges non traits aux liantshydraulique - Partie 43: Mthode dessai pour ladtermination du module dlasticit des graves traits auxliants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil43: Prfverfahren zur Bestimmung des Elastizittsmodulshydrauliaulisch gebundener GemischeThis Eu
14、ropean Standard was approved by CEN on 29 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
15、concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own
16、language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
17、Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for
18、 CEN national Members.Ref. No. EN 13286-43:2003 EBS EN 13286-43:2003EN 13286-43:2003 (E)2ContentspageForeword31Scope. .52Normative references 53Terms and definitions. .54Determination of the modulus of elasticity by compression or by direct tensile test54.1Principle. .54.2Apparatus. 64.2.1Testing ma
19、chine. 64.2.2Strain measuring device. 64.3Preparation of the test specimen .84.4Test procedure .84.4.1Position of the strain measuring device on the specimen. .84.4.2Positioning the specimen on the test machine and loading .84.5Data recording and calculation of the elastic modulus. 85Determination o
20、f the modulus of elasticity by indirect tensile test95.1Principle. .95.2Apparatus. 95.2.1Testing machine conforming to EN 13286-42. 95.2.2Strain measuring device. 95.3Preparation of the test specimen .115.4Test procedure .115.4.1Position the strain measuring device on the specimen 115.4.2Positioning
21、 the specimen in the press and loading. 115.5Data recording 115.6Calculation of the elastic modulus .116Test report. .12BS EN 13286-43:2003EN 13286-43:2003 (E)3ForewordThis document (EN 13286-43:2003) has been prepared by Technical Committee CEN/TC 227 “Road materials“,the secretariat of which is he
22、ld by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by December 2004.This European Standard is one of a seri
23、es of standards as listed below.EN 13286-1, Unbound and hydraulically bound mixtures Part 1: Test methods for laboratory reference densityand water content Introduction, general requirements and sampling .prEN 13286-2, Unbound and hydraulically bound mixtures Part 2: Test methods for laboratory refe
24、rence densityand water content Proctor compaction.EN 13286-3, Unbound and hydraulically bound mixtures Part 3: Test methods for laboratory reference densityand water content Vibrocompression with controlled parameters.EN 13286-4, Unbound and hydraulically bound mixtures Part 4: Test methods for labo
25、ratory reference densityand water content Vibrating hammer.EN 13286-5, Unbound and hydraulically bound mixtures Part 5: Test methods for laboratory reference densityand water content Vibrating table.prEN 13286-7, Unbound and hydraulically bound mixtures Part 7: Cyclic load triaxial test for unbound
26、mixtures.EN 13286-40, Unbound and hydraulically bound mixtures Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures Part 41: Test method for the determination of thecompressive of strength of hy
27、draulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures Part 42: Test method for the determination of theindirect tensile strength of hydraulically bound mixtures.EN 13286-43, Unbound and hydraulically bound mixtures Part 43: Test method for the determination of themodulus o
28、f elasticity of hydraulically bound mixtures.prEN 13286-44, Unbound and hydraulically bound mixtures Part 44: Test method for the determination of thealpha coefficient of vitrified blastfurnace slag.prEN 13286-45, Unbound and hydraulically bound mixtures Part 45: Test method for the determination of
29、 theworkability period of hydraulically bound mixtures.prEN 13286-46, Unbound and hydraulically bound mixtures Part 46: Test method for the determination of themoisture condition value.prEN 13286-47, Unbound and hydraulically bound mixtures Part 47: Test method for the determination ofCalifornia bea
30、ring ratio, immediate bearing index and linear swelling.prEN 13286-48, Unbound and hydraulically bound mixtures Part 48: Test method for the determination of thedegree of pulverisation.BS EN 13286-43:2003EN 13286-43:2003 (E)4prEN 13286-49, Unbound and hydraulically bound mixtures Part 49: Test metho
31、d for the determination of theaccelerated swelling of soil treated by lime and/or hydraulic binder.prEN 13286-50, Unbound and hydraulically bound mixtures Part 50: Method for the manufacture of testspecimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction.prEN 1
32、3286-51, Unbound and hydraulically bound mixtures Part 51: Method for the manufacture of testspecimens of hydraulically bound mixtures using vibrating hammer compaction.prEN 13286-52, Unbound and hydraulically bound mixtures Part 52: Method for the manufacture of testspecimens of hydraulically bound
33、 mixtures using vibrocompression.prEN 13286-53, Unbound and hydraulically bound mixtures Part 53: Method for the manufacture of testspecimens of hydraulically bound mixtures using axial compression.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followi
34、ngcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovak Republic, Spain, Sweden, Switzerland and the United Kingdom.BS EN 13286-43:
35、2003EN 13286-43:2003 (E)51 ScopeThis European Standard specifies a test method for the determination of the modulus of elasticity of specimens ofhydraulically bound mixtures. The European Standard applies to specimens manufactured in the laboratory orprepared from cores.The modulus is determined usi
36、ng either: the test on compressive strength; the direct tensile test; or the indirect tensile test.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, a
37、nd the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (inc
38、luding amendments).EN 13286-40, Unbound and hydraulically bound mixtures Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures Part 41: Test method for the determination of thecompressive of stre
39、ngth of hydraulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures Part 42: Test method for the determination of theindirect tensile strength of hydraulically bound mixtures.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions
40、 apply.3.1hydraulically bound mixturemixture that hardens by hydraulic and/or pozzolanic and/or sulphatic and/or carbonatic reaction, which usually hasa workability to suit compaction by rolling and which is generally used in bases, sub-bases and capping layers3.2modulus of elasticityvalue given by
41、the quotient stress/strain4 Determination of the modulus of elasticity by compression or by direct tensile test4.1 PrincipleA specimen of hydraulically bound mixtures is subjected to a uniaxial compressive stress according to EN 13286-41 or a direct tensile stress according to EN 13286-40.BS EN 1328
42、6-43:2003EN 13286-43:2003 (E)6During the test, the force-strain curve is recorded to permit the determination of the modulus of elasticity of thematerial.4.2 Apparatus4.2.1 Testing machineWhen the test is carried out in compression, the machine shall conform to EN 13286-41.When the test is carried o
43、ut in direct tension, the machine shall conform to EN 13286-40.4.2.2 Strain measuring deviceThe longitudinal strain shall be measured on the wall of the specimen, on three straight lines offset by 120 in the“central part“ of the specimen. The length l0of the “central part“ shall be at least four tim
44、es the maximumdimension of the aggregate. In compression, the distance from the platens to the extremities of the central partshall be at least 1,5 times the maximum dimension of the aggregate and at least 15 mm. The accuracy of the valuel used for calculation shall be within 3 %.The strain is measu
45、red directly when using a strain gauge and is equal to l / l0when using an extensometer.When the extensometer (see Figure 1) is used, it shall consist of two rigid rings, each fixed to the wall of thespecimen by three screws. The end of the screw shall have a rounded end to avoid penetration into th
46、e specimen.Three transducers shall be fixed to one of the rings to determine the displacement between the two rings. Theaverage of the three measurements gives the value of l, of the specimen during the test and therefore the strain .NOTESystems for adjusting the distance l0 between the two rings co
47、uld be added to facilitate the operation. For example,three removable screws which should be taken away during the test.BS EN 13286-43:2003EN 13286-43:2003 (E)7Keya) Viewb) Top view1Specimen2Rigid ring3Screw4Transducer5Removable screwFigure 1 Extensometer for compression or tensile testBS EN 13286-4
48、3:2003EN 13286-43:2003 (E)84.3 Preparation of the test specimenWhen the test is carried out in compression, specimen preparation shall conform to EN 13286-41. The method ofspecimen manufacture, the type of compaction and curing shall be stated in the test report.When test is carried out in direct te
49、nsion, specimen preparation shall conform to EN 13286-40. The type of curingshall be stated in the test report.4.4 Test procedure4.4.1 Position of the strain measuring device on the specimenThe strain gauges or extensometer shall be positioned in the central part of the specimen as specified in 4.2.2.4.4.2 Positioning the specimen on the test machine and loadingThe positioning of the test specimen in the machine and the loading shall conform to either EN 13286-40 orEN 13286-4
