1、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58a
2、nd face protectors for fencers Requirements and test methodsICS 13.340.01Protective clothing Hand, arm, chest, abdomen, leg, genital BRITISH STANDARDBS EN 13567:2002 +A1:2007BS EN 13567:2002+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSIThi
3、s British Standard was published under the authority of the Standards Policy and Strategy Committee on 5 August 2002 BSI 2008ISBN 978 0 580 61983 0Amendments/corrigenda issued since publicationDate Comments30 May 2008 Implementation of CEN amendment A1:2007PH/3, Protective clothing, to Subcommittee
4、PH/3/11, Protective equipment for sports players.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance
5、with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 13567:2002+A1:2007. It supersedes BS EN 13567:2002, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text
6、by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13567:2002+A1 June 20
7、07 ICS 13.340.10 Supersedes EN 13567:2002English Version Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods Vtements de protection - Protection des mains, des bras, de la piotrine, de labdomen, des jambes, gnitales et de la f
8、ace pour les escrimeurs - Exigences et mthodes dessaiSchutzkleidung - Hand-, Arm-, Brustkorb-, Unterleibs-, Bein-, Genital- und Gesichtsschtzer fr Fechter - Anforderungen und Prfverfahren This European Standard was approved by CEN on 25 March 2002 and includes Amendment 1 approved by CEN on 10 May 2
9、007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
10、 on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management
11、 Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
12、Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form an
13、d by any means reserved worldwide for CEN national Members. Ref. No. EN 13567:2002+A1:2007: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSI2 Contents page Foreword3 Introduction .4 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Re
14、quirements.9 4.1 General9 4.2 Innocuousness.9 4.3 Ergonomic requirements 9 4.4 Restraint requirements .9 4.5 Sizing 9 4.6 Minimum dimensions of zones of protection .10 4.7 Construction materials and construction details.18 4.8 Penetration resistance 20 4.9 Burst strength of seams .22 5 Test methods2
15、2 5.1 Instruments 22 5.2 Products for testing.22 5.3 Conditioning of products23 5.4 Innocuousness.23 5.5 Ergonomic testing .23 5.6 Sizing 24 5.7 Examination of zones of protection.24 5.8 Restraint testing of masks24 5.9 Bib attachment testing 25 5.10 Penetration testing 26 5.11 Burst testing.35 6 Ma
16、rking .36 7 Information to be supplied by the manufacturer36 Annex A (informative) Information about determining the chemical innocuousness of protective clothing and equipment 38 A.1 General38 A.2 Evidence of innocuousness .38 A.3 Possible specific innocuousness testing .38 Annex B (informative) Le
17、vels of protection.40 B.1 Performance levels40 B.2 Performance of combinations40 B.3 Fencing jackets, breeches and underpants40 B.4 Masks - bibs .41 Annex C (informative) Visors and masks made of material other than steel wire mesh 42 Annex ZA (informative) Clauses of this European Standard addressi
18、ng essential requirements or other provisions of EU Directives43 Bibliography44 BS EN 13567:2002+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSI3 Foreword This document (EN 13567:2002+A1:2007) has been prepared by Technical Committee CEN/TC
19、162 “Protective clothing including hand and arm protection and lifejackets“, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2007 and conflicting national
20、standards shall be withdrawn at the latest by December 2007. This document includes Amendment 1, approved by CEN on 2007-05-10. This document supersedes EN 13567:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepare
21、d under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Interna
22、l Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
23、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 13567:2002+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSI4 Introduction Fencing by virtue of being a combat sport in
24、which body contact by the weapon occasionally (but usually inadvertently) occurs outside the zones of protection, is by its nature dangerous. Protective clothing and equipment for fencers is intended as far as possible to prevent injuries, or in the worst cases to reduce the severity of injuries, pa
25、rticularly by the point of the weapon. Broken blades pose a particular threat. The circumstances of the breakage of blades may result in high tip velocities and consequent high energy impacts by the broken blade. Broken blades have been known to penetrate protective equipment with fatal consequences
26、. No practical clothing is capable of withstanding all broken blade impacts. In this standard the concept of the optimum level of protection has been taken into account. This concept is that the level of protection specified should be as high as it can be, without causing such unacceptable discomfor
27、t or impediment to fencing movements that fencers would not use the protective clothing. The clothing specified in this standard provides two levels of protection perceived by the organisers and participants in the sport to be appropriate. Its use is expected to reduce risks of injuries to fencers t
28、o a tolerable level. 1 Scope This European Standard specifies the general requirements for ergonomics, sizing, coverage and performance of protective clothing and equipment for use in the sport of fencing. Requirements for the marking of clothing and equipment and the information to be supplied by t
29、he manufacturer are given. Test methods are described and performance levels are defined. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the
30、publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (includi
31、ng amendments). EN 166:2001, Personal eye-protection Specifications. EN 388, Protective gloves against mechanical risks. EN 420, General requirements for gloves. EN 1082-1:1996, Protective clothing Gloves and arm guards protecting against cuts and stabs by hand knives Part 1: Chain mail gloves and a
32、rm guards. EN ISO 5084:1996, Textiles Determination of thickness of textiles and textile products (ISO 5084:1996). EN 13546:2002, Protective clothing Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players Requirements and test
33、 methods. EN 13595-3:2002, Protective clothing for professional motorcycle riders Jackets, trousers and one-piece or divided suits Part 3: Test method for determination of burst strength. EN ISO 13938-1:1999, Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of burst
34、ing strength and bursting distension (ISO 13938-1:1999). BS EN 13567:2002+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSI5 EN ISO 13938-2:1999, Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting st
35、rength and bursting distension (ISO 13938-2:1999). !deleted text“ ISO 3758, Care labelling code using symbols. ISO 6330:2000, Textiles Domestic washing and drying procedures for textile testing. ISO 7500-1:1999, Metallic materials Verification of static uniaxial testing machines Part 1: Torsion/comp
36、ression testing machines Verification and calibration of the force-measuring system. ISO 8559:1989, Garment construction and anthropometric surveys Body dimensions. 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 protective clothing
37、and equipment clothing and specific devices worn on the body, arms, hands and legs and over the face and neck, that are intended to reduce the severity of injuries from fencing weapons 3.2 zone of protection area of protective equipment that is intended to provide protection, and is subject to speci
38、fic testing 3.3 coverage area of the fencers body covered by the whole item of protective clothing or equipment and its attachments 3.4 garment unit of clothing which itself has an integral zone of protection replacing or in addition to an article of non-protective clothing 3.5 handedness designs an
39、d the markings on equipment that relate to its intended use by fencers holding their weapons in the right hands or left hands or whether the equipment is for ambidextrous use by right or left handed fencers 3.6 performance level number designating the level of the protection that it is intended the
40、product should provide. This number is used in designating the test severity to which the product is to be subjected. For non-normative guidance on performance levels and the choice of equipment see annex B 3.7 fencing International and Olympic sport based on European duelling with swords and embrac
41、ing disciplines characterised by the relevant weapons 3.8 weapon collective term covering the following specific swords used in fencing BS EN 13567:2002+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSI6 3.8.1 foil rectangular section blade co
42、nventional duelling weapon with which hits are scored with the point only. The target is the anterior of the torso including the abdomen and the posterior torso down to the waist. The head, arms and legs are excluded, but are often hit 3.8.2 epee traditional duelling weapon of V section blade with w
43、hich hits are scored only with the point, and for which the target is the whole body, including the head and feet 3.8.3 sabre weapon derived from the Cavalry sabre with a blunt cutting edge. Hits are scored with any part of the blade. The target is the whole body above the waist with the exception o
44、f the hands 3.9 point expanded and/or flattened end of the blade of a weapon so designed as to reduce the possibility of the perforation of the protective clothing 3.10 fencing mask protective device covering the face and sides of the head and the front of the neck. The parts are illustrated in Key
45、! a) Front view b) Side view “ 1 Hard shell 2 Lateral protection 3 Bib 4 Visor (optional) Figure 1 Component parts of a fencing mask BS EN 13567:2002+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 29/07/2008 03:08, Uncontrolled Copy, (c) BSI7 3.10.1 hard shell framework, part of which
46、 is see-through covering the face of the head 3.10.2 lateral protection framework, part of which can be see-through covering the sides of the head and meeting over the top of the head 3.10.3 mask bib protective element covering the front of the neck 3.10.4 visor optional transparent area of the mask
47、 replacing part or all of the hard shell 3.10.5 join any junction between the hard shell and visor, or hard shell or visor and the lateral protection 3.10.6 see-through area region of the hard shell through which a fencer is able to see their opponent 3.11 fencing clothing clothing designed specific
48、ally for the sport of fencing 3.11.1 fencing jacket garment covering the full length of both arms from the wrist to the shoulder, the chest and at least the upper part of the abdomen 3.11.2 fencing breeches (trousers) garment covering the abdomen, thighs and knees (and occasionally the lower leg) 3.
49、11.3 fencing underpants protective garment covering the abdomen and upper half of the thigh. If used, this garment is worn inside the trousers 3.11.4 (fencing) under plastron one armed garment worn under a jacket covering at least part of the weapon arm, the axilla (armpit) of the weapon arm and part of the chest wall on the same side NOTE There are two-armed under plastrons which cover both of the fencers arms. These are generally used by sabre fencers to reduce bruising. 3.11.5 fencing gloves clothing covering the hand, wrist
