1、BRITISH STANDARDBS EN 13715:2006Incorporating Corrigendum No. 1Railway applications Wheelsets and bogies Wheels Wheels treadThe European Standard EN 13715:2006 has the status of a British StandardICS 45.040g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g4
2、9g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIBS EN 13715:2006This British Standard was published under the authority of the Standards Policy and Strategy
3、Committee on 31 March 2006 BSI 2006ISBN 0 580 48002 XNational forewordThis British Standard is the official English language version of EN 13715:2006.The UK participation in its preparation was entrusted by Technical Committee RAE/3, Railway rolling stock materials, to Subcommittee RAE/3/-/1, Wheels
4、 and wheelsets, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Cata
5、logue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its cor
6、rect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests inform
7、ed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 29 and a back cover.The BSI copyright notice displayed in this document indicates when the document wa
8、s last issued.Amendments issued since publicationAmd. No. Date Comments16515 Corrigendum No. 130 June 2006 Correction to formatting errors at printing stageLicensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13715Febr
9、uary 2006ICS 45.040English VersionRailway applications - Wheelsets and bogies - Wheels - WheelstreadApplications ferroviaires - Essieux monts et bogies -Roues - Profil de roulementBahnanwendungen - Radstze und Drehgestelle - Rder -RadprofileThis European Standard was approved by CEN on 9 January 200
10、6.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on a
11、pplication to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has
12、 the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani
13、a,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldw
14、ide for CEN national Members.Ref. No. EN 13715:2006: ELicensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 2 Contents Page Foreword4 Introduction .4 1 Scope 5 2 Normative references 5 3 Definition of the tread profile5 4 Symbols and abbreviations 7 4
15、.1 Definition of the profiles .8 5 Construction method 8 5.1 Definition of the axes 8 5.2 Base profile 8 5.3 Profile construction.8 5.3.1 Profile zone H2 D1 (flange) 8 5.3.2 Profile connection zone D1 C19 5.3.3 Profile zone D1 C1 D0 for flange thicknesses 28,5 mm e 32,5 mm 10 5.3.4 Zone D0 B1 (B1a o
16、r B1b)11 5.3.5 Reverse slope and chamfer 12 6 Geometric characteristics.12 6.1 R20,5 connecting radius .12 6.2 RE and RI 12 mm connecting radii.12 6.3 Rfa connecting radius .13 6.4 R13 connecting radius 13 6.5 Wheel tread.13 6.6 Reverse slope Chamfer13 7 Profile designation.13 8 Reference equipment
17、for verification of the wheel profile 13 Annex A (normative) Flange 14 A.1 Definition of the flange14 A.2 Flange geometry 15 Annex B (normative) 1/40th profile16 B.1 Complete reference profile: construction with a 32,5 mm thick flange and 15 % reverse slope16 B.2 Profile construction: specific zones
18、16 Annex C (normative) S1002 profile 18 C.1 Complete reference profile: construction with 32,5 mm thick flange and 6,7 % reverse slope18 C.2 Profile construction: specific zones18 Annex D (normative) EPS profile .22 D.1 Complete reference profile: construction with 32,5 mm thick flange and 10 % reve
19、rse slope22 D.2 Profile construction: specific zones22 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 96/48/EC .25 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2001
20、/16/EC .27 Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 3 Bibliography29 Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 4 Foreword This document (EN 13715:2006) has been prepared by Tech
21、nical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting national standards shall be
22、 withdrawn at the latest by August 2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives 96/48 and 2001/16. For relationship with EU Directive(s), see informative Ann
23、exes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Ge
24、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Introduction This standard states requirements that are in accordance with the principles adop
25、ted by the International Union of Railways. It: describes the rules, parameters and construction methods of the wheel tread profile; defines the geometry of the flange and reverse slope. The thicknesses and height of the flange are determined by the railway undertaking or its representative in compl
26、iance with the normative documents in force; defines the co-ordinates and geometry of the following three reference tread profiles of the wheels and their reverse slope: 1/40th (reverse slope 15 %); S1002 (reverse slope 6,7 %, other value used 15 %) in conformity with UIC Leaflet 510-2; EPS (reverse
27、 slope 10 %) equivalent to profile P8 of the United Kingdom with a flange 30 mm thick. These three reference profiles are defined in Annexes B, C and D and represent original profiles from the time of their design, the flanges having been harmonized to a 32,5 mm flange thickness. defines the toleran
28、ces needed to achieve calibration control. All the dimensions in this standard are given in millimetres. Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 5 1 Scope This European Standard defines the tread profiles of wheels with a diameter greate
29、r than or equal to 330 mm used on vehicles running on European standard gauge track to fulfil interoperability requirements. These profiles apply to new wheels, whether free-standing or assembled as wheelsets, as well as to wheels that require reprofiling during maintenance. Any profile that does no
30、t conform to this standard shall only be used following agreement between the train operator and the infrastructure manager. 2 Normative references None apply to this standard. 3 Definition of the tread profile The tread profile is shown in Figure 1. Key Licensed Copy: Wang Bin, na, Fri Aug 25 07:47
31、:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 6 The points marked with “*“ relate respectively to the following profiles B 1 S1002 B1a 1/40th B1b EPS C1 S1002 C1a 1/40th C1b EPS See Table 1 Symbols and abbreviations Figure 1 Wheel tread profile Licensed Copy: Wang Bin, na, Fri Aug 25 07:
32、47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 7 4 Symbols and abbreviations Table 1 Symbols and abbreviations Z 1 Internal zone of flange (H2 S) Z 2 External zone of flange (S D1) Z 3 Connection zone, flange to wheel tread D1 C1(C1a, C1b) Z 4 Wheel tread zone C1 (C1a, C1b) - B1 (B1a, B
33、1b) Z 5 Zone between the wheel tread (reverse slope) and chamfer B1 (B1a, B1b) I a Position of the axis intersecting the tip of the flange relative to the internal face of the wheel d Wheel diameter e Flange thickness de Difference between the reference value for flange thickness (32,5 mm) and the n
34、ew value of “e“ h Flange height Y Y axis Z Z axis y Abscissa according to “Y“ axis for the specific point z Ordinate according to the “Z“ axis for the specific point A1 Connection point of the reverse slope with the 5 mm x 5 mm chamfer B1 (B1a, B1b) Connection point of the reverse slope with the whe
35、el tread C1 C1a, C1b) Starting point of the connection zone between the wheel tread and the flange zone C11a, C11b, C12, D1a, D1b, E1, F1, G1, H1, T1 Unique profile construction points D0 Location of the wheel tread, 70 mm from its internal face. Origin of the co-ordinate axes D1 Starting point of t
36、he flange H2 Finishing point of the flange, on the internal face of the wheel I Starting point of the profile on the external face of the wheel L Rim nominal width, 135 mm or 140 mm Rfa External flange radius, a function of the flange height RE 12 mm radius, connection to the external face of the fl
37、ange RI 12 mm radius, connection to the internal face of the flange Rem Centre of radius RE Rim Centre of radius RI R13 13 mm radius, connection between the internal face of the flange and the wheel tread Hm Centre of 20,5 mm radius Fm Centre of Rfa radius Dm Centre of R 13 radius Jm Centre of 100 m
38、m radius (EPS) and of 36 mm radius (1/40th) Jm1 Centre of 330 mm radius (EPS) S Connection at the tip of the flange AXB Connection axis at the tip of the flange BDN Flange CR Wheel tread plane FEJ External face of the wheel FIJ Internal face of the wheel Licensed Copy: Wang Bin, na, Fri Aug 25 07:47
39、:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 8 4.1 Definition of the profiles The profiles comprise: two zones H2 S and S D1, with fixed geometry; a connection zone D1 C1, unique to each of them, to make a tangential connection at point C1; a zone C1 B1 (either B1a, or B1b) unique to ea
40、ch of them. The co-ordinates are given in Annexes B, C and D for the three reference profiles including point D0; a zone B1 (either B1a or B1b) A1 I, comprising the reverse slope and chamfer, unique to each reference profile. The reverse slope shall be in the range 6,7 % to 15 %. 5 Construction meth
41、od 5.1 Definition of the axes The Y axis is parallel to the axis of rotation of the wheel with the positive values towards the external face of the wheel. The Z axis is perpendicular to the latter with the positive values towards the outside of the wheel. Their origin is at point D0, situated 70 mm
42、from the internal face of the wheel. 5.2 Base profile The base profile is that obtained with a flange 32,5 mm thick and 28 mm high. All the others are developed from this fundamental profile. 5.3 Profile construction 5.3.1 Profile zone H2 D1 (flange) The reference flange (dimensions, centres and rad
43、ii) is given in Annex A for a flange thickness of 32,5 mm. The different flange thicknesses are obtained by translating the zones S-D1, parallel to the Y axis, towards the internal face of the wheel. Annex A gives all the co-ordinates for flange thicknesses between 28,5 mm and 32,5 mm. After transla
44、tion, the connection axis (AXB) at the tip of the flange (S) is at a distance, in mm, from the wheel internal face of: a e= 15 32 52, Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 9 Figure 2 Flange 5.3.2 Profile connection zone D1 C1 The chara
45、cteristics of these connections specific to each profile are given in Annexes B, C and D. The definitions of the connection zones are shown in Figures 3, 4 and 5. Figure 3 1/40th connection zone Figure 4 S1002 connection zone Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Co
46、py, (c) BSIEN 13715:2006 (E) 10 Figure 5 EPS connection zone 5.3.3 Profile zone D1 C1 D0 for flange thicknesses 28,5 mm e 32,5 mm 5.3.3.1 S1002 and 1/40th profiles For flange thicknesses greater than 28,5 mm, but less than 32,5 mm, the profiles are obtained by translating the zones D1-C1 (connection
47、 zone) and C1-T1 along the Y axis towards the internal face of the wheel, by an amount equal to the reduction (de) in thickness of the flange. The position of the point T1 is defined relative to the reference point D0 for all flange thicknesses. The connection between points D0 and T1 may be smoothe
48、d by a straight line. Figure 6 Extension of the wheel tread zone T1 D0 Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled Copy, (c) BSIEN 13715:2006 (E) 11 Figure 7 Connection T1 D0 5.3.3.2 EPS profile For the flange thickness values greater than 28,5 mm and less than 32,5 mm, t
49、he profile shape is obtained by changing a curve in zone D1-C1, the co-ordinates of which the are given in Table D.1 which defines the EPS profile in Annex D (the centre of the 330 mm radius remains fixed). Figure 8 EPS profile 5.3.4 Zone D0 B1 (B1a or B1b) The zone D0 B1 (B1a or B1b), as appropriate to each profile, remains fixed for each type. Licensed Copy: Wang Bin, na, Fri Aug 25 07:47:27 BST 2006, Uncontrolled C
