1、BS EN 14037-3:2016Free hanging heating and cooling surfaces for water with a temperature below 120CPart 3: Prefabricated ceiling mounted radiant panels for space heating Rating method and evaluation of radiant thermal outputBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013
2、15:06BS EN 14037-3:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14037-3:2016.It supersedes BS EN 14037-3:2003 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RHE/6, Air or space heaters or coolers withoutcom
3、bustion.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI
4、Standards Limited 2016ISBN 978 0 580 90459 2ICS 91.140.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2016.Amendments/corrigenda issued since publi
5、cationDate Text affectedBS EN 14037-3:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14037-3 September 2016 ICS 91.140.10 Supersedes EN 14037-3:2003English Version Free hanging heating and cooling surfaces for water with a temperature below 120C - Part 3: Prefabricated ceiling mounted radi
6、ant panels for space heating - Rating method and evaluation of radiant thermal output Panneaux rayonnants de chauffage et de rafrachissement aliments avec une eau une temprature infrieure 120 C - Partie 3 : Mthode dvaluation et calcul de la puissance thermique radiative des panneaux rayonnants de pl
7、afond prfabriqus destins au chauffage des locaux An der Decke frei abgehngte Heiz- und Khlflchen fr Wasser mit einer Temperatur unter 120 C - Teil 3: Vorgefertigte Deckenstrahlplatten zur Raumheizung - Wrmetechnische Umrechnungen, Bewertungsmethoden und Festlegung der Strahlungs-Wrmeleistung This Eu
8、ropean Standard was approved by CEN on 19 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references c
9、oncerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member
10、 into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Franc
11、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMI
12、TEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14037-3:2016 EBS EN 14037-3:2016EN 14037-3:2016 (E) 2 Contents Page European foreword 3 Introducti
13、on . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions 5 4 Testing of the mean surface temperature and the emissivity of the panel . 5 4.1 Determination of the mean surface temperature of the active length . 5 4.2 Determination of the emissivity . 6 5 Thermal output conversion Determi
14、nation of the rated thermal output 7 6 Evaluation of the thermal radiant output of a tested panel 7 Bibliography . 8 BS EN 14037-3:2016EN 14037-3:2016 (E) 3 European foreword This document (EN 14037-3:2016) has been prepared by Technical Committee CEN/TC 130 “Space heating appliances without integra
15、l heat sources”, the secretariat of which is held by UNI. This document supersedes EN 14037-3:2003. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards s
16、hall be withdrawn at the latest by March 2017. The main changes are: the title has been changed, the scope has been changed, the introduction has been changed, some editorial updates have been added. The European Standard EN 14037, Free hanging heating and cooling surfaces for water with a temperatu
17、re below 120C, consists of the following parts: Part 1: Prefabricated ceiling mounted radiant panels for space heating - Technical specifications and re-quirements; Part 2: Prefabricated ceiling mounted radiant panels for space heating - Test method for thermal output; Part 3: Prefabricated ceiling
18、mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output; Part 4: Prefabricated ceiling mounted radiant panels for space heating - Test method for cooling capacity; Part 5: Open or closed heated ceiling surfaces - Test method for thermal output. Attention is
19、drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the foll
20、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
21、Norway, Poland, Portu-gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14037-3:2016EN 14037-3:2016 (E) 4 Introduction This European Standard results from the recognition, that heated and chilled ceiling radiant panels falling into the field of applic
22、ation hereinafter stated are traded on the basis of their thermal output. For evaluating and comparing different heated and chilled ceiling surfaces it is therefore necessary to refer to a heating stipulated value. As installations with ceiling mounted radiant panels can also be used in practice for
23、 space cooling, it is nec-essary to have a test method for evaluating the cooling capacity. Installations with different free hanging heating and cooling surfaces need, for the use of space heating a test method for evaluating the heating out-put. The test method differs from the method for ceiling
24、mounted radiant panels. BS EN 14037-3:2016EN 14037-3:2016 (E) 5 1 Scope This European Standard describes the procedure to determine the rated thermal output (D) and the mean surface temperature (trp) of pre-fabricated ceiling mounted radiant panels. Pre-fabricated ceiling mounted radiant panels exch
25、ange heat mainly by radiation. The test methods for determining the thermal output of pre-fabricated ceiling mounted radiant panels, as described in EN 14037-2:2016, give reliable results for comparing different products, but these results un-derstate the output obtained under real operating conditi
26、ons. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indis-pensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any
27、 amendments) applies. EN 14037-1:2016, Prefabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements EN 14037-2:2016, Prefabricated ceiling mounted radiant panels for space heating - Test method for thermal output 3 Terms and definitions For the purposes
28、of this document, the terms and definitions given in EN 14037-1:2016 apply. 4 Testing of the mean surface temperature and the emissivity of the panel 4.1 Determination of the mean surface temperature of the active length The mean surface temperature shall be determined by an Infra-Red (IR) system wi
29、th the following features: automatic mean temperature of the measured surface including the emissivity, the distance and the ambient temperature. The test is made in the same test booth and under the same test conditions described in EN 14037-2:2016, Clauses 5, 7 and 8. While testing the mean surfac
30、e temperature, the connecting components shall be insulat-ed. The mean surface temperature shall be determined with the IR system for each testing point according to EN 14037-2:2016, 8.10. The IR system shall be installed with the sensitive probe directed towards the central vertical axis of the cei
31、l-ing mounted radiant panel (see Figure 1). BS EN 14037-3:2016EN 14037-3:2016 (E) 6 Dimensions in meter Key 1 IR system A top view B side view over the width of the ceiling panel C side view over the length of the ceiling panel Figure 1 Arrangement of the IR system and the ceiling panel in the test
32、booth during determination with only one testing point The distance between the surface of the ceiling mounted radiant panel and the sensor shall be two meters. The field of view shall be not less than 80 over the length and not less than 60 over the width of the panel. The tolerance of mean surface
33、 temperature shall be not more than 1,0 K. The results of the determination of the radiant output shall be reported in accordance with EN 14037-2:2016, Clause 9. 4.2 Determination of the emissivity The determination of the emissivity shall be carried out with samples of the original sheet covered wi
34、th the surface coating used at production. The test shall be done by laboratories which comply with EN 14037-2:2016, Clause 4. BS EN 14037-3:2016EN 14037-3:2016 (E) 7 5 Thermal output conversion Determination of the rated thermal output Practical experiments under real conditions and simulation exer
35、cises indicate that test booth results under-state output from radiant ceiling mounted panels by a factor of about 10 %. In order to ensure that designers are able to use test data for correct sizing of products a correction factor is applied to test data to give rated thermal output D. The factor o
36、f 1,1 shall be introduced in the characteristic equation determined according to EN 14037-2:2016, 8.13. The rated thermal output shall be taken from this equation in correspondence of standard temperature difference. 6 Evaluation of the thermal radiant output of a tested panel The radiant output of
37、the tested panel can be calculated for each measuring point as follows: = 44rad rp rp w rp()TTA The referred percentage of radiant output is calculated for each measuring point as follows: = radact100r BS EN 14037-3:2016EN 14037-3:2016 (E) 8 Bibliography 1 EN ISO/IEC 17025, General requirements for
38、the competence of testing and calibration laboratories (ISO/IEC 17025) 2 Glck, B.: Wrmeabgabe von Strahlplatten unter Prfbedingungen und im praktischen Einsatz; GI (1989) H. 3 S. 113/128 3 Glck, B.: Wirtschaftliche Hallenheizung mit Strahlplatten; HLH 47 (1990) Nr. 8, S. 685 4 Glck, B.: Erforderlich
39、e Heizleistung fr Hallenbauten in Abhngigkeit des Heizsystems. Stadt- und Gebudetechnik (1990) H. 1, S.10/15, H. 2, S.47/50, H.3, S.68/71 5 Glck, B.: Leistungen von Strahlplatten; HLH (1992) H.9, S465/471 6 Glck, B., Ochocinski B.: Strahlplattenleistungen unter realen Einsatzbedingungen Simulation d
40、er Luftstrmung um Strahlplatten in Prfrumen und Hallen; HLH (1993) H.3, S.158/165 7 Bitter H., Mangelsdorf R.: Wrmeleistung einer Deckenstrahlplatte unter Prfstands- und Praxisbe-dingungen; HLK-Brief Nr. 5, Dez. 93, Frderverein HLK Stuttgart 8 Kast, W., Klan, H.: Wrmeleistung von Deckenheizungen mit
41、 FeM berechnet; HLH 45 (1994) Nr. 3 S.99/101 9 Kast, W., Klan, H., Rosenberg, J.: Leistungen von Heiz- und Khlflchen; HLH 45 (1994) Nr. 6 S.278/281 10 Marchesi R., Niro A. (Politecnico di Milano, Dipartimento di Energetica): Numerical study of thermal performance of prefabricated, ceiling mounted pa
42、nels in closed rooms This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BS
43、I Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a
44、 dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British
45、 Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be pur
46、chased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI
47、or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the st
48、andard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in sof
49、t copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or i
