1、BRITISH STANDARD BS EN 14145:2003 Holders for lifebuoys The European Standard EN 14145:2003 has the status of a British Standard ICS 47.080 BS EN 14145:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 6 August 2003 BSI 6 August 2003 ISBN
2、 0 580 42417 0 National foreword This British Standard is the official English language version of EN 14145:2003. The UK participation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology, to Subcommittee SME/32/7, Ships and marine technology Inland navigation
3、vessels, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue
4、 under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct
5、 application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inform
6、ed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indica
7、tes when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN14145 April2003 ICS47.080 Englishversion Holdersforlifebuoys Attachespourbouesdesauvetage HalterfrRettungsringe ThisEuropeanStandardwasapprovedbyCENon2Jan
8、uary2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentr
9、eortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodie
10、sofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUnitedKing dom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:
11、ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN14145:2003EEN 14145:2003 (E) 2 Contents Page Foreword .3 1 Scope4 2 Normative references.4 3 Dimensions.4 4 Material .6 5 Surface protection6 6 Designation.6 EN 14145:
12、2003 (E) 3 Foreword This document EN 14145:2003 has been prepared by Technical Committee CEN/TC 15 “Inland navigation vessels”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme
13、nt, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latest by October 2003 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, C
14、zech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. EN 14145:2003 (E) 4 1 Scope This standard specifies the types and dimensions of holders for lifeb
15、uoys in accordance with EN 14144. The holder is used as a support for the lifebuoy. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publica
16、tions are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amen
17、dments). EN 14144, Lifebuoys - Requirements, tests. ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications. 3 Dimensions General tolerance: ISO 2768 - c Edges shall be rounded with min. R 0,3 mm NOTE The rounding of the edges is i
18、ntended to prevent clothing from becoming caught. The holder shall conform to the dimensions specified in Figures 1, 2 and 3. The holder is not expected to conform to the design illustrated here. Figure 1 shows one of the three securing plates for holders, form A or B. Figure 2 shows form A with the
19、 configuration of the three securing plates welded to a wall. Figure 3 shows form B as a holder for bolting on. Dimensions in millimetres Figure 1 Securing plate EN 14145:2003 (E) 5 Dimensions in millemetres Figure 2 Holder made of welded-on securing plates (form A) Dimensions in millimetres Figure
20、3 Holder for bolting on (form B) NOTE Holders of form B may also be fitted with a holder for a lifebuoy light. EN 14145:2003 (E) 6 4 Material The material used shall be either steel, hot-dip galvanized steel, stainless steel, aluminium resistant to seawater.or plastic For the purposes of the designa
21、tion in clause 6, the following abbreviations shall be used: Al aluminium; Stst stainless steel; St steel. Hgal st hot-dip galvanized steel; Pl - plastic. 5 Surface protection The surfaces of the holder shall be plane where the lifebuoy is attached so that chafing cannot occur. 6 Designation An exam
22、ple of the designation of a holder for lifebuoys shall comprise the name (holder), the standard number, the form (B) and the material (hot-dip galvanized steel: Hgal st): Holder EN 14145 B Hgal st blankBS EN 14145:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is
23、 the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sur
24、e that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsi
25、ble, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all
26、BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI pol
27、icy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service
28、. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and re
29、ceive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online
30、can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under th
31、e Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementi
32、ng the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
