1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58leaves and external doorframes Requirements and specificationsThe European Standard EN 14220:2006 h
2、as the status of a British StandardICS 79.060.01; 91.060.50Timber and wood-based materials in external windows, external door BRITISH STANDARDBS EN 14220:2006BS EN 14220:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI
3、 2006ISBN 0 580 49754 2Amendments issued since publicationAmd. No. Date Commentscontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK imple
4、mentation of EN 14220:2006. The UK participation in its preparation was entrusted to Technical Committee B/543, Round and sawn timber.A list of organizations represented on B/543 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of
5、a EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14220November 2006ICS 79.060.01; 91.060.50English VersionTimber and wood-based materials in external windows, externaldoor leaves and external doorframes - Requirements andspecificationsBois et matriaux base de bois dans les fentresextrieures, les
6、vantaux de portes extrieures et lesdormants de portes extrieures - Exigences etspcificationsHolz und Holzwerkstoffe in Auenfenstern, Auentren undAuentrzargen - Anforderungen und SpezifikationenThis European Standard was approved by CEN on 11 September 2006.CEN members are bound to comply with the CE
7、N/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to a
8、ny CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN
9、members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerl
10、and and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1422
11、0:2006: EEN 14220:2006 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 General requirements7 5 Appearance 7 5.1 Characteristics.7 5.2 Appearance classes 7 5.2.1 General7 5.2.2 Finger jointing, end jointing, edge jointing and laminating 8
12、5.3 Adhesives and repair compounds.8 5.4 Slope of grain.9 5.5 Repair9 5.5.1 Features 9 5.5.2 Plugs .9 5.5.3 Filler 10 5.6 Wood-based products.10 6 Biological durability 10 7 Moisture content10 8 Surface finish .10 9 Density 11 Annex A (informative) Quality recommendations for elements in external wi
13、ndows, external door leaves and external doorframes.12 Annex B (informative) Classification of the face of a window/door.22 Bibliography 26 EN 14220:2006 (E) 3 Foreword This document (EN 14220:2006) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which
14、 is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. This Standard is one of a package
15、to be implemented by 2007.10.31. The Standards included in the Package are: Standard Number Title 1 prEN 942 Revised Timber in joinery - General requirements 2 EN 13307-1 Timber blanks and semi-finished profiles for non-structural uses Part 1: Requirements 3 EN 14220 Timber and wood-based materials
16、in external windows, external door leaves and external doorframes Requirements and specifications 4 EN 14221 Timber and wood-based materials in internal windows, internal door leaves and internal doorframes Requirements and specifications Explanation Standards 3 and 4 rely on both Standards 1 and 2,
17、 and Standard 2 relies on 1. The revised prEN 942 contains changes which directly affect Standards 2, 3 and 4 and therefore shall be available before they can be used effectively. NOTE Following the completion of the Technical Enquiry for prEN 13307-2 Timber blanks and semi-finished profiles for non
18、-structural uses Part 2: Production control, it has been agreed to remove this Standard form the package. As a result of the necessary changes it has been agreed to offer prEN 13307-2 as a CEN/TS. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followin
19、g countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
20、Sweden, Switzerland and United Kingdom. EN 14220:2006 (E) 4 Introduction The classification method given in this standard is applicable to timber and wood-based products after they have been incorporated into complete windows, external door leaves and external doorframes. This standard contains the
21、principle material requirements of timber in wood-based products, the processing of this timber and the components in the final products. Requirements for mechanical aspects are indirectly considered by appearance and density selection. Characteristics and principles are listed in Table 1 and clause
22、s 5, 6, 7, 8 and 9. Specific national requirements are given in Annex A. This standard contains two annexes, Annex A “National requirements“ and Annex B “Weather exposed faces“. Tables A.1 and A.2 of Annex A provide default tables for circumstances where a National Annex is not available. This stand
23、ard is part of a series of standards on timber in windows, doors and stairs. EN 14220:2006 (E) 5 1 Scope This European Standard specifies principle material requirements for timber and wood-based products in external windows, external door leaves and external doorframes (with or without fixed parts)
24、, including those relating to appearance, biological durability and other physical characteristics. This European Standard applies to assembled windows, external door leaves and external doorframes uncoated or intended to be coated. If windows or doors are covered by other decorative veneers or film
25、s their respective veneer of film Product Standard shall apply. NOTE For example: Timber veneers may be graded to EN 635: Parts 1, 2, 3 and 5, and ENV 635-4. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only t
26、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 204, Classification of thermoplastic wood adhesives for non-structural applications EN 335-1, Durability of wood and wood-based products - Definition of use classes
27、- Part 1: General EN 350-2, Durability of wood and wood-based products Natural durability of solid wood- Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe EN 351-1, Durability of wood and wood-based products Preservative treated solid wood Part 1:
28、Classification of preservative penetration and retention EN 460, Durability of wood and wood-based products Natural durability of solid wood Guide to the durability requirements for wood to be used in hazard classes EN 599-1, Durability of wood and wood-based products - Performance of preventive woo
29、d preservatives as determined by biological tests - Part 1: Specification according to hazard class EN 844-3:1995, Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber prEN 942:2006, Timber in joinery General requirements EN 12765, Classification of thermosetting wood
30、adhesives for non-structural applications EN 13307-1, Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements EN 13183-1, Moisture content of a piece of sawn timber Part 1: Determination by oven dry method EN 13183-2, Moisture content of a piece of sawn timber Part 2:
31、 Estimation by electrical resistance method EN 13183-3, Moisture content of a piece of sawn timber Part 3: Estimation by capacitance method EN 13986, Wood-based panels for use in construction Characteristics, evaluation of conformity and marking EN 14298, Sawn timber Assessment of drying quality EN
32、14220:2006 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 844-3:1995 and prEN 942:2006 and the following apply. These definitions shall take into consideration the situation after installation of the product. Where there is a conflict between t
33、he definitions in the Standards referenced and those given below, the definitions given below shall apply. 3.1 profile planed piece of solid or glue-laminated wood, finger-jointed or not, with a cross-section complying with the window, door leaf or doorframe requirements 3.2 concealed face face of a
34、 joinery part which, after installation of the joinery is completed, is permanently concealed by other parts of the joinery product, or by other parts or other elements, including materials such as veneer, plastic or metal NOTE These faces may be visible before the product is installed. 3.3 semi-con
35、cealed face visible face of a joinery part, which cannot be viewed when the window or door is in the closed position 3.4 visible face face of a joinery part which, after installation of the joinery is completed, is not permanently concealed or semi-concealed NOTE 1 An opaque coating system, does not
36、 constitute concealment. NOTE 2 Faces which are visible only when moving parts (e.g. window casements or door leaves) are open are classified as semi-concealed. 3.5 weather exposed face face of a joinery part, which is directly subjected to driving rain or running water or permanent or intermittent
37、condensation NOTE For examples see Annex B. 3.6 appearance class any surface in joinery classified according to shakes, resin pockets, bark pockets, discoloration, sapwood, exposed pith, ambrosia beetle damage and knots 3.7 coating system combination of coating materials, which are to be applied or
38、have been applied to the face of a joinery part EN 14220:2006 (E) 7 4 General requirements The following requirements for the characteristics of the timber and wood-based materials used in windows, external door leaves and external doorframes shall apply: requirements for appearance, which are given
39、 in Clause 5; requirements for biological durability, which are given in Clause 6; requirements for physical properties, which are given in Clauses 7, 8 and 9. For products where the ultimate location is not known at the time of manufacture, sufficient information shall be provided to enable possibl
40、e limitations for the product end use to be identified. 5 Appearance 5.1 Characteristics The characteristics of the profiles that are applicable to the finished product are measured and classified in accordance with the requirements of prEN 942. 5.2 Appearance classes 5.2.1 General Table 1 identifie
41、s the elements for which characteristics shall be assigned and is a template to indicate the form in which the requirements are to be presented. National requirements are presented in Annex A. Where national requirements have not been indicated in Annex A then the values given in Tables A.1 and A.2
42、are to be used. The appropriate timber classes are as specified in prEN 942. EN 14220:2006 (E) 8 Table 1 Principles appearance classes for elements in windows, doors and doorframes Element prEN 942 Class Visible face (3.4) Semi Concealed face (3.3) Concealed face (3.2) Opaque coating system Transluc
43、ent Coating system Opaque coating system Translucent Coating system Frames to windows and doors * * * * * Casement and sashes * * * * * Stiles and rails to doors * * * * * Lipping * * * * * Beads and similar small sections * * * * * Thresholds, sills * * * * * Panelling and infills * * * * * * Infor
44、mation to be provided. See Table A.1 for default values. Where products are subject to wind load, consideration shall be given to the use of a higher grade. When classifying a face as concealed, the grade selected shall not impair the serviceability of the product. 5.2.2 Finger jointing, end jointin
45、g, edge jointing and laminating Specific national requirements are given in Annex A. Where specific national requirements are not available the following restrictions shall apply : Finger jointing, end jointing, edge jointing and laminating is permitted in all elements of Table 1 unless otherwise sp
46、ecified. Infill panels produced from finger jointed pieces shall be manufactured so that when assembled only the fingers of the finger joint are visible. Finger jointing is not permitted where a translucent coating system is applied except where agreed. Laminated timber shall comply with the require
47、ments of EN 13307-1. 5.3 Adhesives and repair compounds Adhesives in timber joints, profiles or repairs which are in a weather exposed position shall be of a durability not inferior to D4 as specified in EN 204 or C4 as specified in EN 12765. Adhesives in any other joints, profiles or repairs shall
48、be of a durability not inferior to D3 as specified in EN 204 or C3 as specified in EN 12765. If a lower class of adhesive is used its use shall be declared and justified. EN 14220:2006 (E) 9 At the time of publication no European tests or classifications are available for repair compounds. Repair co
49、mpounds shall therefore have a similar durability class as the appropriate adhesive. NOTE Adhesives used to connect timber with non-timber components may need special consideration. 5.4 Slope of grain The slope of grain of timber used shall not exceed 1:10 (10 %), except in knot areas. In addition the cumulative length of areas with sloped grain, evaluated along the axis of the timber member, shall not exceed 0,5m or 20 % of the length of the piece, whichev
