1、BSI Standards PublicationBS EN 14314:2015Thermal insulation productsfor building equipment andindustrial installations Factory made phenolic foam(PF) products SpecificationBS EN 14314:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14314:2015. Itsupersedes
2、BS EN 14314:2009+A1:2013 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this committee can beobtained on request to its secretary.This publication doe
3、s not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 88443 6ICS 91.100.60Compliance with a British Standard cannot confer immunity fromlegal o
4、bligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments issued since publicationDate Text affectedBS EN 14314:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14314 December 2015 ICS 91.100.60 Supersedes
5、EN 14314:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en mousse
6、phnolique (PF) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation This European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply wi
7、th the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana
8、gement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same st
9、atus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
10、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN
11、 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14314:2015 EBS EN 14314:2015EN 14314:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1
12、Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviated terms used in this standard 10 4 Requirements 11 4.1 General . 11 4.2
13、For all applications 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 13 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteristics . 13 4.3 For specific applications 14 4.3.1 General . 14 4.3.2 Maximum service t
14、emperature . 14 4.3.3 Minimum service temperature . 14 4.3.4 Dimensional stability under specified conditions . 14 4.3.5 Compression resistance properties 15 4.3.6 Water vapour diffusion resistance 16 4.3.7 Water absorption . 16 4.3.8 Closed cell content . 17 4.3.9 Trace quantities of water soluble
15、chloride and the pH-value 17 4.3.10 Release of dangerous substances . 17 4.3.11 Continuous glowing combustion 17 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning . 18 5.3 Testing 18 5.3.1 General . 18 5.3.2 Thermal conductivity . 20 5.3.3 Reaction to Fire . 21 6 Designation code 21 7 Assessment
16、and Verification of the Constancy of Performance (AVCP) . 21 7.1 General . 21 7.2 Product Type Determination (PTD) 22 7.3 Factory Production Control (FPC) 22 8 Marking and labelling . 22 BS EN 14314:2015EN 14314:2015 (E) 3 Annex A (normative) Factory production control . 23 Annex B (normative) Deter
17、mination of the aged value of thermal conductivity . 25 B.1 General . 25 B.2 Preparation of test sample 25 B.3 Determination of the initial value of thermal conductivity 26 B.4 Determination of the aged value of thermal conductivity . 26 B.5 Blowing agent . 27 B.6 Declaration of thermal resistance a
18、nd thermal conductivity 27 Annex C (normative) Determination of minimum service temperature . 28 C.1 Definitions . 28 C.2 Principle . 28 C.3 Apparatus 28 C.4 Test specimens 29 C.5 Procedure 29 C.6 Calculation and expression of results . 30 C.7 Accuracy of measurements . 30 C.8 Test report 30 C.9 Mod
19、ifications of and additions to the general test method for phenolic foams 31 Annex D (informative) Additional properties . 34 D.1 General . 34 D.2 Apparent density 34 D.3 Coefficient of thermal expansion 34 D.4 Water vapour transmission of preformed pipe insulation . 34 D.5 Tensile strength perpendi
20、cular to faces 34 D.6 Shear strength 34 D.7 Bending strength 35 D.8 Cell gas composition 35 D.9 Cryogenic application . 35 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 36 ZA.1 Scope and relevant characteristics 36 ZA.
21、2 Procedures for AVCP of factory made phenolic foam 38 ZA.3 CE Marking and labelling . 45 Bibliography . 47 BS EN 14314:2015EN 14314:2015 (E) 4 European foreword This document (EN 14314:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretar
22、iat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to
23、 the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14314:2009+A1:2013. This document is identifying those clauses of the standard
24、which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14314 are the following: a) an addition to the foreword; b) modifications in 3.2.2; c) a new 4.3.10; d) modification
25、of 5.3.2; e) replacement of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No
26、. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, ar
27、e allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains five an
28、nexes: Annex A (normative), Factory production control; Annex B (normative), Determination of the aged value of thermal conductivity; Annex C (normative), Determination of minimum service temperature; Annex D (informative), Additional properties; BS EN 14314:2015EN 14314:2015 (E) 5 Annex ZA (informa
29、tive), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations but this standa
30、rd can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict w
31、ith the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipme
32、nt and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equip
33、ment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment a
34、nd industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Therma
35、l insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314,
36、Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products
37、 Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedon
38、ia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14314:2015EN 14314:2015 (E) 6 1 Scope This European Standard speci
39、fies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 C to + 120 C. Below an operating temperature of - 50 C, special tests regarding
40、 the suitability of the products in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware. This European Sta
41、ndard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is n
42、ot covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products
43、with a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure. This European Standard does not cover the foll
44、owing acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited app
45、lies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for building applications - Determination of thickness
46、 EN 824, Thermal insulating products for building applications - Determination of squareness EN 825, Thermal insulating products for building applications - Determination of flatness EN 826, Thermal insulating products for building applications - Determination of compression behaviour EN 1604, Therm
47、al insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications - Determination of compressive creep EN 1608, Thermal insulating products for building applicat
48、ions - Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications - Determination of short term water absorption by partial immersion BS EN 14314:2015EN 14314:2015 (E) 7 EN 12085, Thermal insulating products for building applications - Determin
49、ation of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications - Determination of water vapour transmission properties EN 12429, Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions EN 12667:2001, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium
