BS EN 14617-1-2013 Agglomerated stone Test methods Determination of apparent density and water absorption《烧结石料 试验方法 表观密度和吸水率的测定》.pdf
《BS EN 14617-1-2013 Agglomerated stone Test methods Determination of apparent density and water absorption《烧结石料 试验方法 表观密度和吸水率的测定》.pdf》由会员分享,可在线阅读,更多相关《BS EN 14617-1-2013 Agglomerated stone Test methods Determination of apparent density and water absorption《烧结石料 试验方法 表观密度和吸水率的测定》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 14617-1:2013Agglomerated stone TestmethodsPart 1: Determination of apparent densityand water absorptionBS EN 14617-1:2013 BRITISH STANDARDNational forewordThis British Stan
2、dard is the UK implementation of EN 14617-1:2013.It supersedes BS EN 14617-1:2005 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/545, Natural stone.A list of organizations represented on this committee can beobtained on request to its secretary.This
3、publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 79618 0ICS 91.100.15Compliance with a British Standard cannot confer immun
4、ity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate Text affectedBS EN 14617-1:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14617-1 April 2013 ICS 91.100.1
5、5 Supersedes EN 14617-1:2005English Version Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption Pierre agglomre - Mthodes dessai - Partie 1 : Dtermination de la masse volumique apparente et du coefficient dabsorption deau Knstlich hergestellter Stein -
6、Prfverfahren - Teil 1: Bestimmung der Rohdichte und der Wasseraufnahme This European Standard was approved by CEN on 1 March 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand
7、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an
8、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu
9、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN
10、 COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14617-1:2013: EBS EN 14617-1:201
11、3EN 14617-1:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Terms and definitions .4 3 Apparatus .4 4 Preparation of the specimens 4 4.1 Sampling .4 4.2 Specimen conditioning .4 5 Test procedure .5 6 Expression of results 5 7 Test report 5 Bibliography 7 BS EN 14617-1:2013EN 14617-1:2013 (E) 3 Forew
12、ord This document (EN 14617-1:2013) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by O
13、ctober 2013, and conflicting national standards shall be withdrawn at the latest by October 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pat
14、ent rights. This document supersedes EN 14617-1:2005. Subclause 5.1 has been modified since the last edition of this European Standard. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard is one of a
15、series of standards for test methods for agglomerated stones which includes the following parts: Part 1: Determination of apparent density and water absorption Part 2: Determination of flexural strength (bending) Part 4: Determination of the abrasion resistance Part 5: Determination of freeze and th
16、aw resistance Part 6: Determination of thermal shock resistance Part 8: Determination of resistance to fixing (dowel hole) Part 9: Determination of impact resistance Part 10: Determination of chemical resistance Part 11: Determination of linear thermal expansion coefficient Part 12: Determination of
17、 dimensional stability Part 13: Determination of electrical resistivity Part 15: Determination of compressive strength Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles According to the CEN-CENELEC Internal Regulations, the national standards organi
18、sations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, M
19、alta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14617-1:2013EN 14617-1:2013 (E) 4 1 Scope This European Standard specifies a method for determining the apparent density and water absorption of agglomerated sto
20、ne products. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 apparent density Mvratio between mass (expressed in kg) and apparent volume (expressed in m3) situated within the external surface of the body 2.2 water absorption C maximum amount
21、of water absorbed by the material when soaked in deionised water at room temperature and pressure according to the procedure described below, expressed as a percentage of the dry mass of the sample 3 Apparatus 3.1 A covered tank with a flat base comprising small non-oxidising and non-absorbent suppo
22、rts for the specimens. 3.2 A device able to maintain a constant water level in the tank, described in 4.1. 3.3 A time counter with an accuracy of one second. 3.4 A weighing instrument with an accuracy of 0,01 % of the sample mass. 3.5 A hydrostatic balance accurate to at least 0,01 % of the sample m
23、ass. 3.6 A ventilated oven capable of maintaining a temperature of (70 5) C. 4 Preparation of the specimens 4.1 Sampling The sampling is not the responsibility of the test laboratory except where especially requested. At least six specimens selected from a homogeneous batch consisting of the same ma
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN1461712013AGGLOMERATEDSTONETESTMETHODSDETERMINATIONOFAPPARENTDENSITYANDWATERABSORPTION 烧结 石料 试验 方法

链接地址:http://www.mydoc123.com/p-572582.html