1、BS EN 14846:2008ICS 91.090NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDBuilding hardware Locks and latches Electromechanicallyoperated locks andstriking plates Requirements and testmethodsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/07/2009 01:54
2、, Uncontrolled Copy, (c) BSIThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BSI 2009ISBN 978 0 580 54181 0Amendments/corrigenda issued since publicationDate CommentsBS EN 14846:2008National forewordThis British Standard is the UK imp
3、lementation of EN 14846:2008.The UK participation in its preparation was entrusted to TechnicalCommittee B/538/4, Building hardware.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisio
4、nsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/07/2009 01:54, Uncontrolled Copy, (c) BSIBS EN 14846:2008EUROPEAN STANDARDNORME EUROPENNEEUROPI
5、SCHE NORMEN 14846August 2008ICS 91.190English VersionBuilding hardware - Locks and latches - Electromechanicallyoperated locks and striking plates - Requirements and testmethodsQuincaillerie pour le btiment - Serrures et becs de cane -Serrures et gches lectromcaniques - Exigences etmthodes dessaiBau
6、beschlge - Schlsser - Elektromechanische Schlsserund Schliebleche - Anforderungen und PrfverfahrenThis European Standard was approved by CEN on 18 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the s
7、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German).
8、A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
9、 Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALIS
10、ATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14846:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/07/2009 01:54, Unco
11、ntrolled Copy, (c) BSIBS EN 14846:2008EN 14846:2008 (E) 2 Contents Page Foreword. 4 1 Scope 5 2 Normative references . 5 3 Terms, definitions and symbols 6 4 Classification. 6 4.1 General. 6 4.2 Classification. 7 4.3 Category of use (first digit) 7 4.4 Durability and load on latchbolt (second digit)
12、 . 7 4.5 Door mass and closing force (third digit). 8 4.6 Suitability for use on fire/smoke doors (fourth digit) 9 4.7 Safety (fifth digit). 9 4.8 Corrosion, temperature and humidity (sixth digit) 9 4.9 Security (seventh digit) 10 4.10 Security - electrical function (eighth digit). 10 4.11 Security
13、- electrical manipulation (ninth digit). 11 5 Requirements 12 5.1 General. 12 5.2 Category of use . 12 5.3 Durability 13 5.4 Door mass and closing force. 14 5.5 Suitability for use on fire/smoke doors 14 5.6 Safety 14 5.7 Corrosion, temperature and humidity requirements. 14 5.8 Security requirements
14、 15 5.9 Security Electrical function Status indication . 15 5.10 Security Electrical manipulation 15 5.11 Requirements for product information. 16 6 Test methods. 17 6.1 Test procedure 17 6.2 Category of use tests 18 6.3 Durability tests 19 6.4 Door mass and closing force. 20 6.5 Fire/smoke resistan
15、ce tests. 20 6.6 Safety 20 6.7 Corrosion, temperature and humidity tests . 21 6.8 Security tests. 22 6.9 Security Electrical function tests Status indication 22 6.10 Security Electrical manipulation tests. 22 7 Marking 23 8 Evaluation of conformity 23 8.1 Initial type test . 23 8.2 Sampling, testing
16、 and conformity criteria 24 8.3 Factory production control 25 8.4 Periodic testing . 31 8.5 Annual testing . 31 Annex A (normative) Fire/smoke test requirements. 32 Annex B (normative) Test sampling and sequencing 33 Annex C (normative) Installation and fixing instructions 35 Licensed Copy: Wang Bin
17、, ISO/EXCHANGE CHINA STANDARDS, 02/07/2009 01:54, Uncontrolled Copy, (c) BSIBS EN 14846:2008EN 14846:2008 (E) 3 Annex ZA (normative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive (89/106/EEC) . 37 Bibliography . 43 Licensed Copy: Wang Bin, ISO/
18、EXCHANGE CHINA STANDARDS, 02/07/2009 01:54, Uncontrolled Copy, (c) BSIBS EN 14846:2008EN 14846:2008 (E) 4 Foreword This document (EN 14846:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by A
19、FNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2009, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that som
20、e of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and
21、 supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard has been prepared under mandate M/101 “Doors, windows, shutters, gates and related building hardware” (amended) giv
22、en to CEN by the European Commission and the European Free Trade Association. No existing European Standard is superseded. This European Standard is one of a series of European Standards dedicated to building hardware products. Complementing this European Standard is a European Standard for mechanic
23、ally operated locks, latches and locking plates (EN 12209) and a draft European Standard for mechanically operated multi-point locks (prEN 15685). Electromechanical operated locks and striking plates used in fire/smoke door assemblies require additional attributes in order to comply with the Essenti
24、al Requirements CPD 89/106/EEC “Safety in case of fire“ either independently or as a part of a complete assembly. Additional requirements are specified in Annex A and Annex ZA. The performance tests incorporated in this European Standard are considered to be replicable and as such will provide a con
25、sistent and objective assessment of the performance of these products throughout CEN member states. Electromechanically operated locks and strikes plates to this standard are designed to be installed on doors in buildings (fixed installation). Such doors are not covered by the Waste Electrical and E
26、lectronic Equipment (WEEE) Directive 2002/96/EC or Restriction of the Use of Certain Hazardous Substances in EEE (RoHS) Directive 2002/95/EC. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa
27、rd: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. L
28、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/07/2009 01:54, Uncontrolled Copy, (c) BSIBS EN 14846:2008EN 14846:2008 (E) 5 1 Scope This European Standard specifies requirements and test methods for strength, security, durability and function of electrical and electronic components for all
29、 types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings. Requirements relating to the purely mechanical feature of products included in this European Standard (e.g. resistance to drilling/side load) are covered by EN 12209. This Eu
30、ropean Standard covers electromechanically operated locks and striking plates which are either manufactured and placed on the market in their entirety by one producer or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This document is not appl
31、icable to electrically powered hold-open devices (EN 1155), electrically controlled panic exit systems (prEN 13633) or electrically controlled emergency exit systems (prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders (EN 1303), handles (EN 1906), locks for
32、windows, padlocks (EN 12320), locks for safes (EN 1300), furniture locks or prison locks, nor does it apply to cover operating and identification devices (such as mechanical cylinders, intelligent cards, digit codes, magnetic cards). This European Standard does not, for the time being, apply to elec
33、tromagnetic door locks but these devices will be considered for inclusion in the first revision of this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undat
34、ed references, the latest edition of the referenced document (including any amendments) applies. EN 1634-1, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Part 1: Fire resistance test for doors and shutter assemblies and op
35、enable windows EN 1634-3, Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies EN 1670:2007, Building hardware Corrosion resistance Requirements and test methods EN 122
36、09:2003, Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods EN 60068-2-1:2007, Environmental testing Part 2-1: Tests Tests A: Cold (IEC 60068-2-1:2007) EN 60068-2-2:2007, Environmental testing Part 2-2: Tests Test B: Dry heat (IE
37、C 60068-2-2:2007) EN 60068-2-30, Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 + 12 hour cycle) (IEC 60068-2-30:2005) EN 61000-4-2:1995, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Electrostatic discharge immunity test Basic EMC p
38、ublication (IEC 61000-4-2:1995) EN 61000-4-3:2006, Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2006) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 02/07/2009 01:54, Uncontrolle
39、d Copy, (c) BSIBS EN 14846:2008EN 14846:2008 (E) 6 EN 61000-4-4:2004, Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test (IEC 61000-4-4:2004) EN 61000-4-5:2006, Electromagnetic compatibility (EMC) Part 4-5: Testing and measu
40、rement techniques Surge immunity test (IEC 61000-4-5:2005) EN 61000-4-11, Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004) EN 61000-4-29, Electromagnetic Compatibility (EMC)
41、 Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000) EN ISO 9001:2000, Quality management systems Requirements (ISO 9001:2000) 3 Terms, definitions and symbols For the purposes of this d
42、ocument, the symbols and units given in EN 12209:2003 and the following terms and definitions apply. 3.1 electromechanical lock(s) device using electrically operated means to effect or enable locking and/or unlocking 3.2 electromechanical strike(s) locking plate using electrically operated means to
43、effect or enable locking and/or unlocking 3.3 electric door magnet device which uses only the magnetic attraction to effect or enable locking and/or unlocking 3.4 rated supply voltage nominal voltage for which the device is intended 3.5 deadbolt bolt of any kind that can be deadlocked 4 Classificati
44、on 4.1 General 4.1.1 Mechanically operated locks and latches shall be classified according to the nine character classification system described in 4.3 to 4.11. 4.1.2 All locks regardless of classification shall meet the requirements of 5.1.1 and 5.1.2. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA ST
45、ANDARDS, 02/07/2009 01:54, Uncontrolled Copy, (c) BSIBS EN 14846:2008EN 14846:2008 (E) 7 4.2 Classification for electromechanically operated locks and striking plates Electric locks and electric strikes shall be classified according to the following nine digit coding system described in 4.3 to 4.11.
46、 Table 1 Classification 1 2 3 4 5 6 7 8 9 Category of use Durabilityand load on latchbolt Door massandclosing force Suitability for use on fire/smoke doors Safety Corrosion resistance,temperature and humiditySecurity and drillresistance Securityelectrical function Securityelectrical manipulation 4.3
47、 Category of use (first digit) Three grades are identified in accordance with requirements stated in 5.2.1 to 5.2.4. grade 1 for use by people with a high incentive to exercise care and with a small chance of misuse, e.g. residential doors. grade 2 for use by people with some incentive to exercise c
48、are but where there is some chance of misuse, e.g. office doors. grade 3: for use by the public where there is little incentive to exercise care and where there is a high chance of misuse, e.g. doors in public buildings. 4.4 Durability and load on latchbolt (second digit) Twelve grades of durability
49、 and load on mechanically or electrically operated latchbolt are identified. grade A 50 000 test cycles no load on latchbolt; grade B 100 000 test cycles no load on latchbolt; grade C 200 000 test cycles no load on latchbolt; grade F 50 000 test cycles 10 N load on latchbolt; grade G 100 000 test cycles 10 N load on latchbolt; grade H 200 000 test cycles 10 N load on latchbolt; grade L 100 000 test cycles 25 N load on latchbolt; grade M 200 000 test cycles 25 N load on latchbolt; g
